| YİĞİT A., ARSLANOĞLU N., GUL H. |
TRANSIENT THERMAL MODELING AND PERFORMANCE ANALYSIS OF PHOTOVOLTAIC PANELS |
ENVIRONMENTAL PROGRESS AND SUSTAINABLE ENERGY |
2023 |
(SCI-Expanded) |
| ARSLANOĞLU N., YİĞİT A., EKER B. S. |
INVESTIGATION OF WIND SPEED EFFECT ON DIFFERENT MOUNTED PV SYSTEMS USING SATELLITE DATA |
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY |
2020 |
(SCI-Expanded) |
| ARSLANOĞLU N., YİĞİT A. |
INVESTIGATION OF EFFICIENT PARAMETERS ON OPTIMUM INSULATION THICKNESS BASED ON THEORETICAL-TAGUCHI COMBINED METHOD |
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY |
2017 |
(SCI-Expanded) |
| ARSLANOĞLU N., YİĞİT A. |
EXPERIMENTAL AND THEORETICAL INVESTIGATION OF THE EFFECT OF RADIATION HEAT FLUX ON HUMAN THERMAL COMFORT |
ENERGY AND BUILDINGS |
2016 |
(SCI-Expanded) |
| ARSLANOĞLU N., YİĞİT A. |
EXPERIMENTAL INVESTIGATION OF RADIATION EFFECT ON HUMAN THERMAL COMFORT BY TAGUCHI METHOD |
APPLIED THERMAL ENGINEERING |
2016 |
(SCI-Expanded) |
| YİĞİT A., ATMACA İ., ARSLANOĞLU N., SİVRİOĞLU K. |
EXPERIMENTAL INVESTIGATION OF THE EFFECT OF THERMAL COMFORT PARAMETERS ON CERVICAL RANGE OF MOTION |
INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS |
2015 |
(SCI-Expanded) |
| ARSLANOĞLU N., YİĞİT A. |
THE EFFECT OF DIFFERENT INDOOR AIR VELOCITIES AND TEMPERATURES ON THERMAL COMFORT |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2011 |
(SCI-Expanded) |
| ATMACA I., YIGIT A. |
SIMULATION OF SOLAR-POWERED ABSORPTION COOLING SYSTEM |
RENEWABLE ENERGY |
2003 |
(SCI-Expanded) |
| ATMACA İ., YIGIT A., KILIC M. |
THE EFFECT OF INPUT TEMPERATURES ON THE ABSORBER PARAMETERS |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2002 |
(SCI-Expanded) |
| YIGIT A. |
A NUMERICAL STUDY OF HEAT AND MASS TRANSFER IN FALLING FILM ABSORBER |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
1999 |
(SCI-Expanded) |
| YİĞİT A. |
İKLIMLENDIRME ŞARTLARININ İNSAN VÜCUDUNA ETKISI |
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH |
1999 |
(SCI-Expanded) |
| BIYIKLI M., KARAGOZ T., CALLI M., MUSLIM T., ÖZALP A. A., BAYRAM A. |
SINGLE TRACK GEOMETRY PREDICTION OF LASER METAL DEPOSITED 316L-SI VIA MULTI-PHYSICS MODELLING AND REGRESSION ANALYSIS WITH EXPERIMENTAL VALIDATION |
METALS AND MATERIALS INTERNATIONAL |
2023 |
(SCI-Expanded) |
| TOPUZ A., ENGİN T., ÖZALP A. A., ERDOGAN B., MERT S., YETER A. |
EXPERIMENTAL INVESTIGATION OF OPTIMUM THERMAL PERFORMANCE AND PRESSURE DROP OF WATER-BASED AL2O3, TIO2 AND ZNO NANOFLUIDS FLOWING INSIDE A CIRCULAR MICROCHANNEL |
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY |
2018 |
(SCI-Expanded) |
| BODUROGLU S., ÖZALP A. A. |
A COMPUTATIONAL AND EXPERIMENTAL INVESTIGATION OF THE METALLISATION EFFECTS ON THE THERMAL CHARACTERISTICS OF AN AUTOMOTIVE EXTERIOR LIGHTING LAMP |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2016 |
(SCI-Expanded) |
| UYSAL A., ÖZALP A. A., KORGAVUS A., KORGAVUS O. |
NUMERICAL MODELING OF THE MOMENTUM AND THERMAL CHARACTERISTICS OF AIR FLOW IN THE INTERCOOLER CONNECTION HOSE |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2012 |
(SCI-Expanded) |
| OZALP A. A. |
LAMINAR-TRANSITIONAL MICROPIPE FLOWS: ENERGY AND EXERGY MECHANISMS BASED ON REYNOLDS NUMBER, PIPE DIAMETER, SURFACE ROUGHNESS AND WALL HEAT FLUX |
HEAT AND MASS TRANSFER |
2012 |
(SCI-Expanded) |
| ÖZALP A. A., DINCER I. |
LAMINAR BOUNDARY LAYER DEVELOPMENT AROUND A CIRCULAR CYLINDER: FLUID FLOW AND HEAT-MASS TRANSFER CHARACTERISTICS |
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME |
2010 |
(SCI-Expanded) |
| ÖZALP A. A., DINCER I. |
HYDRODYNAMIC-THERMAL BOUNDARY LAYER DEVELOPMENT AND MASS TRANSFER CHARACTERISTICS OF A CIRCULAR CYLINDER IN CONFINED FLOW |
INTERNATIONAL JOURNAL OF THERMAL SCIENCES |
2010 |
(SCI-Expanded) |
| OZALP A. A. |
COMBINED EFFECTS OF PIPE DIAMETER, REYNOLDS NUMBER AND WALL HEAT FLUX AND ON FLOW, HEAT TRANSFER AND SECOND-LAW CHARACTERISTICS OF LAMINAR-TRANSITIONAL MICRO-PIPE FLOWS |
ENTROPY |
2010 |
(SCI-Expanded) |
| OZALP A. A. |
ENTROPY ANALYSIS OF LAMINAR-FORCED CONVECTION IN A PIPE WITH WALL ROUGHNESS |
INTERNATIONAL JOURNAL OF EXERGY |
2009 |
(SCI-Expanded) |
| OZALP A. A. |
1ST AND 2ND LAW CHARACTERISTICS IN A MICROPIPE: INTEGRATED EFFECTS OF SURFACE ROUGHNESS, HEAT FLUX AND REYNOLDS NUMBER |
HEAT TRANSFER ENGINEERING |
2009 |
(SCI-Expanded) |
| OZALP A. A. |
ROUGHNESS INDUCED FORCED CONVECTIVE LAMINAR-TRANSITIONAL MICROPIPE FLOW: ENERGY AND EXERGY ANALYSIS |
HEAT AND MASS TRANSFER |
2008 |
(SCI-Expanded) |
| OZALP A. A. |
PARALLEL EFFECTS OF ACCELERATION AND SURFACE HEATING ON COMPRESSIBLE FLOW: SIMULATION OF AN AEROSPACE PROPULSION NOZZLE WITH A MEDIUM AMOUNT OF SURFACE WEAR |
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING |
2007 |
(SCI-Expanded) |
| UMUR H., OZALP A. A. |
FLUID FLOW AND HEAT TRANSFER IN TRANSITIONAL BOUNDARY LAYERS: EFFECTS OF SURFACE CURVATURE AND FREE STREAM VELOCITY |
HEAT AND MASS TRANSFER |
2006 |
(SCI-Expanded) |
| OZALP B. T., OZALP A. A. |
SLIDER-BEARING DESIGN WITH MICRO-MACHINED WAVY-CAVITY: PARAMETRIC CHARACTERIZATION OF THERMOHYDRODYNAMIC-OPERATION-SCHEME |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
2006 |
(SCI-Expanded) |
| OZALP A. A., UMUR H. |
OPTIMUM SURFACE PROFILE DESIGN AND PERFORMANCE EVALUATION OF INCLINED SLIDER BEARINGS |
CURRENT SCIENCE |
2006 |
(SCI-Expanded) |
| OZALP A. A. |
NONADIABATIC AND FRICTIONAL CONSTANT AREA DUCT FLOW: A VISUAL SOFTWARE BASED SIMULATION FOR COMPRESSIBLE SYSTEMS |
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION |
2006 |
(SCI-Expanded) |
| OZALP A. A. |
NUMERICAL ANALYSIS OF CHOKED CONVERGING NOZZLE FLOWS WITH SURFACE ROUGHNESS AND HEAT FLUX CONDITIONS |
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES |
2006 |
(SCI-Expanded) |
| OZALP B. T., OZALP A. A. |
A COMPUTATIONAL APPROACH ON THE MULTITASK OPTIMIZATION OF INCLINED SLIDER BEARING PERFORMANCE WITH UPPER-SURFACE-WAVINESS |
LARGE-SCALE SCIENTIFIC COMPUTING |
2006 |
(SCI-Expanded) |
| OZALP A. A. |
A COMPUTATIONAL STUDY TO PREDICT THE COMBINED EFFECTS OF SURFACE ROUGHNESS AND HEAT FLUX CONDITIONS ON CONVERGING-NOZZLE FLOWS |
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING |
2005 |
(SCI-Expanded) |
| UMUR H., OZALP A. A. |
LAMINAR AND TURBULENT FORCED CONVECTION IN ACCELERATING AND DECELERATING CURVED FLOWS |
CURRENT SCIENCE |
2004 |
(SCI-Expanded) |
| OZALP A. A., OZEL S. |
AN INTERACTIVE SOFTWARE PACKAGE FOR THE INVESTIGATION OF HYDRODYNAMIC-SLIDER BEARING-LUBRICATION |
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION |
2003 |
(SCI-Expanded) |
| OZALP A. A., UMUR H. |
AN EXPERIMENTAL INVESTIGATION OF THE COMBINED EFFECTS OF SURFACE CURVATURE AND STREAMWISE PRESSURE GRADIENTS BOTH IN LAMINAR AND TURBULENT FLOWS |
HEAT AND MASS TRANSFER |
2003 |
(SCI-Expanded) |
| OZALP A. A., UMUR H. |
FLOW AND HEAT TRANSFER MEASUREMENTS IN LAMINAR AND TURBULENT CONVEX SURFACE BOUNDARY LAYERS |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2002 |
(SCI-Expanded) |
| OZALP A. A. |
A COMPUTER-ASSISTED APPROACH TO INDUSTRIAL GAS TURBINE PERFORMANCE CALCULATION |
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION |
1999 |
(SCI-Expanded) |
| UĞUZ A., PENEKLI U. |
DETERMINATION OF MECHANICAL BEHAVIOR OF METAL-RUBBER COMPOUND PULLEY PART, FINITE ELEMENT ANALYSIS AND VERIFICATION WITH TESTS |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2020 |
(SCI-Expanded) |
| DÜZYER GEBİZLİ Ş., KORAL KOÇ S., HOCKENBERGER A., EVKE E., KAHVECİ Z., UĞUZ A. |
EFFECTS OF DIFFERENT STERILIZATION METHODS ON POLYESTER SURFACES |
TEKSTIL VE KONFEKSIYON |
2013 |
(SCI-Expanded) |
| ERTAN T., ERTAN R., UĞUZ A. |
EFFECTS OF WELDING PARAMETERS ON THE MECHANICAL PROPERTIES OF INERT GAS WELDED 6063 ALUMINUM ALLOYS |
MATERIALS TESTING |
2012 |
(SCI-Expanded) |
| AYDIN H., BAYRAM A., UĞUZ A., AKAY S. K. |
TENSILE PROPERTIES OF FRICTION STIR WELDED JOINTS OF 2024 ALUMINUM ALLOYS IN DIFFERENT HEAT-TREATED-STATE |
MATERIALS & DESIGN |
2009 |
(SCI-Expanded) |
| AYDIN H., BAYRAM A., UGUZ A. |
ABRASIVE AND SLIDING WEAR CHARACTERISTICS OF AL-SI CAST ALLOYS BEFORE AND AFTER COATING BY PLASMA ELECTROLYTIC OXIDATION PROCESS |
MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION |
2008 |
(SCI-Expanded) |
| UĞUZ A., BAYRAM A. |
THE OBSERVATION OF GRAIN BOUNDARY PHASES IN AL-ZN-MG ALLOYS CONTAINING DISPERSOIDS |
METALL |
2004 |
(SCI-Expanded) |
| UGUZ A., OKA S. |
MODELING THE EFFECTS OF MECHANICAL LOADS FINITE ELEMENT MODELING OF BALL JOINTS UNDER DYNAMIC LOADING |
MATERIALPRUEFUNG/MATERIALS TESTING |
2004 |
(SCI-Expanded) |
| UGUZ A. |
DETERMINATION OF THE CRYSTALLOGRAPHIC PARAMETERS OF A FCC METAL BY MEANS OF ELECTRON CHANNELLING PATTERNS |
CRYSTAL RESEARCH AND TECHNOLOGY |
2003 |
(SCI-Expanded) |
| UGUZ A., BAYRAM A. |
THE OBSERVATION OF GRAIN BOUNDARY PHASES IN AL-ZN-MG ALLOYS CONTAINING DISPERSOIDS |
METALL |
2003 |
(SCI-Expanded) |
| BAYRAM A., UGUZ A., DURMUS A. |
RAPID DETERMINATION OF THE FRACTURE TOUGHNESS OF METALLIC MATERIALS USING CIRCUMFERENTIALLY NOTCHED BARS |
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE |
2002 |
(SCI-Expanded) |
| UGUZ A., BAYRAM A. |
EFFECT OF SI CONTENT AND MICROSTRUCTURE ON THE WEAR BEHAVIOUR OF AL-SI ALLOYS |
METALL |
2001 |
(SCI-Expanded) |
| BAYRAM A., UĞUZ A. |
EFFECT OF MICROSTRUCTURE ON THE WEAR BEHAVIOUR OF A DUAL PHASE STEEL |
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK |
2001 |
(SCI-Expanded) |
| BAYRAM A., UGUZ A. |
EFFECT OF MICROSTRUCTURE ON THE WEAR BEHAVIOUR OF A DUAL PHASE STEEL EINFLUSS DER MIKROSTRUKTUR AUF DAS VERSCHLEISSVERHALTEN EINES DUALPHASEN-STAHLS |
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK |
2001 |
(SCI-Expanded) |
| BAYRAM A. S., UĞUZ A. |
THE EFFECT OF SPHEROIDISING AND NA-MODIFICATION ON THE MECHANICAL PROPERTIES OF AL-SI CAST ALLOYS |
METALL |
1999 |
(SCI-Expanded) |
| BAYRAM A., UGUZ A. |
THE EFFECT OF A NOTCH ON THE TENSILE PROPERTIES OF A COMMERCIAL 7075-AL ALLOY |
METALL |
1999 |
(SCI-Expanded) |
| BAYRAM A., UGUZ A., ULA M. |
EFFECTS OF MICROSTRUCTURE AND NOTCHES ON THE MECHANICAL PROPERTIES OF DUAL-PHASE STEELS |
MATERIALS CHARACTERIZATION |
1999 |
(SCI-Expanded) |
| UGUZ A., MARTIN J. |
PLASTIC ZONE SIZE MEASUREMENT TECHNIQUES FOR METALLIC MATERIALS |
MATERIALS CHARACTERIZATION |
1996 |
(SCI-Expanded) |
| UGUZ A., MARTIN J. |
THE EFFECT OF RETROGRESSION AND RE-AGEING ON THE DUCTILE FRACTURE TOUGHNESS OF AL-ZN-MG ALLOYS CONTAINING DIFFERENT DISPERSOID PHASES |
JOURNAL OF MATERIALS SCIENCE |
1995 |
(SCI-Expanded) |
| UĞUZ A., MARTIN J. W. |
A NOTE ON STRETCH ZONES IN AN AL-ZN-MG ALLOY |
MATERIALS CHARACTERIZATION |
1995 |
(SCI-Expanded) |
| MISIRLI Z., UGUZ A., BAYKARA T. |
EFFECT OF ADDITIVES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF COMMERCIAL ALUMINA CERAMICS |
MATERIALS CHARACTERIZATION |
1994 |
(SCI-Expanded) |
| UGUZ A., MARTIN J. |
PLASTIC ZONE SIZE MEASUREMENTS IN AL-ZN-MG ALLOYS BY MEANS OF SELECTED AREA CHANNELLING PATTERNS |
ZEITSCHRIFT FUER METALLKUNDE/MATERIALS RESEARCH AND ADVANCED TECHNIQUES |
1992 |
(SCI-Expanded) |
| UGUZ A., MARTIN J. |
THE MEASUREMENT OF GRAIN BOUNDARY PARTICLE DISTRIBUTIONS IN AGED ALZNMG ALLOYS |
MATERIALS CHARACTERIZATION |
1991 |
(SCI-Expanded) |
| TEKIN A., UGUZ A., MARTIN J. |
RAPID METHOD FOR THE DETERMINATION OF TEM FOIL THICKNESS |
MATERIALS CHARACTERIZATION |
1990 |
(SCI-Expanded) |
| TEKGÜL A., ŞARLAR K., KÜÇÜK N., ETEMOĞLU A. B. |
THE STRUCTURAL, MAGNETIC AND MAGNETOCALORIC PROPERTIES OF MNCRNIGESI HIGH-ENTROPY ALLOY |
PHYSICA SCRIPTA |
2022 |
(SCI-Expanded) |
| TASKIN O., POLAT A., ETEMOGLU A. B., IZLI N. |
ENERGY AND EXERGY ANALYSIS, DRYING KINETICS, MODELING, MICROSTRUCTURE AND THERMAL PROPERTIES OF CONVECTIVE-DRIED BANANA SLICES |
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY |
2022 |
(SCI-Expanded) |
| SARLAR K., TEKGÜL A., KÜÇÜK N., ETEMOĞLU A. B. |
STRUCTURAL AND MAGNETOCALORIC PROPERTIES OF FENI HIGH ENTROPY ALLOYS |
PHYSICA SCRIPTA |
2021 |
(SCI-Expanded) |
| TÜRKAN B., ETEMOĞLU A. B., CAN M. |
ANALYSIS OF EVAPORATIVE DRYING OF THIN INK FILMS USING HIGH-VELOCITY HOT-AIR IMPINGING JETS: A COMPREHENSIVE REVIEW |
SURFACE REVIEW AND LETTERS |
2020 |
(SCI-Expanded) |
| TÜRKAN B., ETEMOĞLU A. B., CAN M. |
INVESTIGATION OF THERMAL ARCHITECTURES FOR FLUE-GAS ASSISTED ORGANIC RANKINE CYCLE SYSTEMS: AN ASSESSMENT FOR THERMODYNAMICS AND ENVIRONMENTAL PERFORMANCE INDICATORS |
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS |
2020 |
(SCI-Expanded) |
| TÜRKAN B., ETEMOĞLU A. B. |
PERFORMANCE EVALUATION FOR THERMAL ARCHITECTURES OF FLUE-GAS ASSISTED ORGANIC RANKINE CYCLE SYSTEMS |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2020 |
(SCI-Expanded) |
| KULAHLI M. C., OZEN S. A., ETEMOĞLU A. B. |
NUMERICAL SIMULATION OF A PARABOLIC TROUGH COLLECTOR CONTAINING A NOVEL PARABOLIC REFLECTOR WITH VARYING FOCAL LENGTH |
APPLIED THERMAL ENGINEERING |
2019 |
(SCI-Expanded) |
| TÜRKAN B., ETEMOĞLU A. B., CAN M. |
AN INVESTIGATION INTO EVAPORATIVE INK DRYING PROCESS ON FORCED CONVECTIVE HEAT AND MASS TRANSFER UNDER IMPINGING AIR JETS |
HEAT AND MASS TRANSFER |
2019 |
(SCI-Expanded) |
| TÜRKAN B., ETEMOĞLU A. B. |
NUMERICAL INVESTIGATION OF WOOD DRYING |
WOOD RESEARCH |
2019 |
(SCI-Expanded) |
| TÜRKAN B., CANBOLAT A. S., ETEMOĞLU A. B. |
NUMERICAL INVESTIGATION OF MULTIPHASE TRANSPORT MODEL FOR HOT-AIR DRYING OF FOOD |
JOURNAL OF AGRICULTURAL SCIENCES-TARIM BILIMLERI DERGISI |
2019 |
(SCI-Expanded) |
| ETEMOĞLU A. B., CAN M. |
PERFORMANCE STUDIES OF ENERGY CONSUMPTION FOR SINGLE AND MULTIPLE NOZZLE SYSTEMS UNDER IMPINGING AIR JETS |
HEAT AND MASS TRANSFER |
2013 |
(SCI-Expanded) |
| ETEMOGLU A. B. |
THERMODYNAMIC INVESTIGATION OF LOW-TEMPERATURE INDUSTRIAL WASTE-HEAT RECOVERY IN COMBINED HEAT AND POWER GENERATION SYSTEMS |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2013 |
(SCI-Expanded) |
| PULAT E., ISMAN M. K., ETEMOĞLU A. B., CAN M. |
EFFECT OF TURBULENCE MODELS AND NEAR-WALL MODELING APPROACHES ON NUMERICAL RESULTS IN IMPINGEMENT HEAT TRANSFER |
NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS |
2011 |
(SCI-Expanded) |
| ETEMOGLU A. B., ISMAN M. K., CAN M. |
INVESTIGATION INTO THE EFFECT OF NOZZLE SHAPE ON THE NOZZLE DISCHARGE COEFFICIENT AND HEAT AND MASS TRANSFER CHARACTERISTICS OF IMPINGING AIR JETS |
HEAT AND MASS TRANSFER |
2010 |
(SCI-Expanded) |
| ETEMOGLU A. B., ULCAY Y., CAN M., AVCI A. |
MATHEMATICAL MODELLING OF COMBINED DIFFUSION OF HEAT AND MASS TRANSFER THROUGH FABRICS |
FIBERS AND POLYMERS |
2009 |
(SCI-Expanded) |
| PULAT E., ETEMOGLU A. B., CAN M. |
WASTE-HEAT RECOVERY POTENTIAL IN TURKISH TEXTILE INDUSTRY: CASE STUDY FOR CITY OF BURSA |
RENEWABLE & SUSTAINABLE ENERGY REVIEWS |
2009 |
(SCI-Expanded) |
| CAN M., ETEMOĞLU A. B. |
OPTIMIZATION OF THE ARRAYS OF IMPINGING JETS |
OPTIMIZATION IN FOOD ENGINEERING |
2009 |
(SCI-Expanded) |
| ISMAN M. K., PULAT E., ETEMOGLU A. B., CAN M. |
NUMERICAL INVESTIGATION OF TURBULENT IMPINGING JET COOLING OF A CONSTANT HEAT FLUX SURFACE |
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS |
2008 |
(SCI-Expanded) |
| ETEMOGLU A. B. |
THERMODYNAMIC EVALUATION OF GEOTHERMAL POWER GENERATION SYSTEMS IN TURKEY |
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS |
2008 |
(SCI-Expanded) |
| ETEMOGLU A. B., CAN M. |
CLASSIFICATION OF GEOTHERMAL RESOURCES IN TURKEY BY EXERGY ANALYSIS |
RENEWABLE & SUSTAINABLE ENERGY REVIEWS |
2007 |
(SCI-Expanded) |
| ETEMOGLU A. B. |
A BRIEF SURVEY AND ECONOMICAL ANALYSIS OF AIR COOLING FOR ELECTRONIC EQUIPMENTS |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2007 |
(SCI-Expanded) |
| ETEMOGLU A. B., CAN M., AVCI A., PULAT E. |
THEORETICAL STUDY OF COMBINED HEAT AND MASS TRANSFER PROCESS DURING PAPER DRYING |
HEAT AND MASS TRANSFER |
2005 |
(SCI-Expanded) |
| CAN M., ETEMOGLU A. B. |
POROSITY MEASUREMENT OF STAINLESS STEEL FILTERS PRODUCED BY ELECTRICAL DISCHARGE TECHNIQUE |
FILTRATION & SEPARATION |
2004 |
(SCI-Expanded) |
| YAVUZ N., ETEMOGLU A. B., GULLU E., CAN M. |
THE PATTERN OF HEAT GENERATION IN THE ELECTRICAL DISCHARGE COMPACTION PROCESS |
METALL |
2004 |
(SCI-Expanded) |
| CAN M., ETEMOGLU A. B. |
INVESTIGATION INTO METHODS OF ENHANCING HEAT TRANSFER UNDER IMPINGING AIR JETS |
EXPERIMENTAL HEAT TRANSFER |
2003 |
(SCI-Expanded) |
| CAN M., ETEMOGLU A. B., AVCI A. |
EXPERIMENTAL STUDY OF CONVECTIVE HEAT TRANSFER UNDER ARRAYS OF IMPINGING AIR JETS FROM SLOTS AND CIRCULAR HOLES |
HEAT AND MASS TRANSFER |
2002 |
(SCI-Expanded) |
| AVCI A., CAN M., ETEMOGLU A. B. |
A THEORETICAL APPROACH TO THE DRYING PROCESS OF THIN FILM LAYERS |
APPLIED THERMAL ENGINEERING |
2001 |
(SCI-Expanded) |
| MİNDİVAN F., MİNDİVAN H., BAYRAM A. |
THE ELECTROLESS MONOLAYER AND DUPLEX NI–B AND NI–P COATINGS FOR 316L STAINLESS STEEL IN SYNERGISTIC COMBINATION OF MECHANICAL (WEAR) AND CHEMICAL (CORROSION) PROCESSES |
ADVANCED ENGINEERING MATERIALS |
2023 |
(SCI-Expanded) |
| ARI A., BAYRAM A., KARAHAN M., ARSLAN O. |
COMPARATIVE EVALUATION OF MECHANICAL PROPERTIES OF SHORT ARAMID FIBER ON THERMOPLASTIC POLYMERS |
MATERIALS SCIENCE-POLAND |
2023 |
(SCI-Expanded) |
| ARI A., BAYRAM A., KARAHAN M., KARAGOZ S. |
COMPARISON OF THE MECHANICAL PROPERTIES OF CHOPPED GLASS, CARBON, AND ARAMID FIBER REINFORCED POLYPROPYLENE |
POLYMERS & POLYMER COMPOSITES |
2022 |
(SCI-Expanded) |
| AYDIN H., TUNÇEL O., TUTAR M., BAYRAM A. |
EFFECT OF TOOL PIN PROFILE ON THE HOOK GEOMETRY AND MECHANICAL PROPERTIES OF A FRICTION STIR SPOT WELDED AA6082-T6 ALUMINUM ALLOY |
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING |
2021 |
(SCI-Expanded) |
| AYDIN H., TUTAR M., DAVUT K., BAYRAM A. |
EFFECT OF WELDING CURRENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF 15% DEFORMED TWIP STEEL JOINED WITH ELECTRICAL RESISTANCE SPOT WELDING |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2020 |
(SCI-Expanded) |
| UMUR Y., AYDIN H., YİĞİT K., BAYRAM A. |
SPRINGBACK/SPRINGFORWARD BEHAVIOUR OF DP STEELS USED IN THE AUTOMOTIVE INDUSTRY |
TEHNICKI VJESNIK-TECHNICAL GAZETTE |
2020 |
(SCI-Expanded) |
| AYDIN H., TUTAR M., BAYRAM A. |
STRAIN EFFECT ON THE MICROSTRUCTURE, MECHANICAL PROPERTIES AND FRACTURE CHARACTERISTICS OF A TWIP STEEL SHEET |
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS |
2018 |
(SCI-Expanded) |
| TUTAR M., AYDIN H., BAYRAM A. |
EFFECT OF WELD CURRENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A RESISTANCE SPOT-WELDED TWIP STEEL SHEET |
METALS |
2017 |
(SCI-Expanded) |
| TUTAR M., AYDIN H., YUCE C., YAVUZ N., BAYRAM A. |
THE OPTIMISATION OF PROCESS PARAMETERS FOR FRICTION STIR SPOT-WELDED AA3003-H12 ALUMINIUM ALLOY USING A TAGUCHI ORTHOGONAL ARRAY |
MATERIALS & DESIGN |
2014 |
(SCI-Expanded) |
| TUTAR M., AYDIN H., DURMUŞ A., BAYRAM A., YİĞİT K. |
THE HYDRO-ABRASIVE EROSION WEAR BEHAVIOR OF DUPLEX-TREATED SURFACES OF AISI H13 TOOL STEEL |
SCIENCE CHINA-TECHNOLOGICAL SCIENCES |
2014 |
(SCI-Expanded) |
| AYDIN H., TUNCEL O., YUCE C., TUTAR M., YAVUZ N., BAYRAM A. |
EFFECT OF ROTATIONAL SPEED AND DWELL TIME ON MECHANICAL PROPERTIES OF DISSIMILAR AA1050-AA3105 FRICTION STIR SPOT WELDED JOINTS |
MATERIALS TESTING |
2014 |
(SCI-Expanded) |
| AYDIN H., BAYRAM A., TOPCU S. |
FRICTION CHARACTERISTICS OF NITRIDED LAYERS ON AISI 430 FERRITIC STAINLESS STEEL OBTAINED BY VARIOUS NITRIDING PROCESSES |
MATERIALS SCIENCE-MEDZIAGOTYRA |
2013 |
(SCI-Expanded) |
| AYDIN H., BAYRAM A., DURGUN I. |
AN INVESTIGATION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF POST-WELD HEAT-TREATED FRICTION STIR WELDS IN ALUMINUM ALLOY 2024-W |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
2013 |
(SCI-Expanded) |
| AYDIN H., BAYRAM A., TOPCU S. |
EFFECT OF DIFFERENT NITRIDING PROCESSES ON THE FRICTION COEFFICIENT OF 304 AUSTENITIC AND 420 MARTENSITIC STAINLESS STEELS |
INDUSTRIAL LUBRICATION AND TRIBOLOGY |
2013 |
(SCI-Expanded) |
| AYDIN H., TUTAR M., DURMUŞ A., BAYRAM A., SAYACA T. |
EFFECT OF WELDING PARAMETERS ON TENSILE PROPERTIES AND FATIGUE BEHAVIOR OF FRICTION STIR WELDED 2014-T6 ALUMINUM ALLOY |
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS |
2012 |
(SCI-Expanded) |
| DURMUŞ A., AYDIN H., TUTAR M., BAYRAM A., YİĞİT K. |
EFFECT OF THE MICROSTRUCTURE ON THE NOTCHED TENSILE STRENGTH OF AS-CAST AND AUSTEMPERED DUCTILE CAST IRONS |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
2012 |
(SCI-Expanded) |
| AYDIN H., BAYRAM A., EŞME U., KAZANÇOĞLU Y., GÜVEN O. |
APPLICATION OF GREY RELATION ANALYSIS (GRA) AND TAGUCHI METHOD FOR THE PARAMETRIC OPTIMIZATION OF FRICTION STIR WELDING (FSW) PROCESS |
MATERIALI IN TEHNOLOGIJE |
2010 |
(SCI-Expanded) |
| AYDIN H., BAYRAM A., DURGUN I. |
THE EFFECT OF POST-WELD HEAT TREATMENT ON THE MECHANICAL PROPERTIES OF 2024-T4 FRICTION STIR-WELDED JOINTS |
MATERIALS & DESIGN |
2010 |
(SCI-Expanded) |
| AYDIN H., BAYRAM A., YILDIRIM M. T., YİĞİT K. |
INFLUENCE OF WELDING PARAMETERS ON THE FATIGUE BEHAVIOURS OF FRICTION STIR WELDS OF 3003-O ALUMINUM ALLOYS |
MATERIALS SCIENCE-MEDZIAGOTYRA |
2010 |
(SCI-Expanded) |
| GÜL C., DURMUŞ A. |
DESIGN OF EXPERIMENT STUDY OF THE PARAMETERS THAT AFFECT PERFORMANCE OF A THERMOPLASTIC ELASTOMER SPRING OF A HYBRID VEHICLE TORQUE LIMITER |
TEHNICKI VJESNIK |
2022 |
(SCI-Expanded) |
| DEVECI O. O., DURMUŞ A. |
FRONTAL IMPACT SLED TESTING OF A NEW DESIGNED VEHICLE SEAT TRACK BRACKET |
INTERNATIONAL JOURNAL OF CRASHWORTHINESS |
2022 |
(SCI-Expanded) |
| KUS S., DURMUŞ A. |
STRESS-CONSTRAINED INFILL OPTIMIZATION IN ADDITIVE MANUFACTURING FOR THE ARMREST OF AN OFFICE CHAIR |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2021 |
(SCI-Expanded) |
| SARIOĞLU B., DURMUŞ A. |
MANUFACTURE AND TESTING OF AIR SPRINGS USED IN RAILWAY VEHICLES |
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING |
2019 |
(SCI-Expanded) |
| TUTAR M., AYDIN H., DURMUŞ A. |
THE EFFECT OF DUPLEX SURFACE TREATMENT ON EROSION PERFORMANCE OF QRO 90 SUPREME STEEL |
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES |
2019 |
(SCI-Expanded) |
| CAKAN B., DURMUŞ A. |
INVESTIGATION OF INITIAL YIELDING IN THE SMALL PUNCH CREEP TEST |
MATERIALS TESTING |
2018 |
(SCI-Expanded) |
| ÇAVDAR K., DURMUŞ A. |
EFFECTS OF PRESSURE AND TIME ON RADIAL RIVETING PROCESS |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2018 |
(SCI-Expanded) |
| MEHTA P., YILDIZ B. S., SAIT S. M., YILDIZ A. R. |
A NOVEL HYBRID FICK'S LAW ALGORITHM-QUASI OPPOSITIONAL-BASED LEARNING ALGORITHM FOR SOLVING CONSTRAINED MECHANICAL DESIGN PROBLEMS |
MATERIALPRUEFUNG/MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| KOPAR M., YLLDLZ A. R., YLLDLZ B. S. |
OPTIMUM DESIGN OF A COMPOSITE DRONE COMPONENT USING SLIME MOLD ALGORITHM |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| ERDAŞ M. U., KOPAR M., YILDIZ B. S., YILDIZ A. R. |
OPTIMUM DESIGN OF A SEAT BRACKET USING ARTIFICIAL NEURAL NETWORKS AND DANDELION OPTIMIZATION ALGORITHM |
MATERIALPRUEFUNG/MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| KOPAR M., YILDIZ A. R. |
EXPERIMENTAL INVESTIGATION OF MECHANICAL PROPERTIES OF PLA, ABS, AND PETG 3-D PRINTING MATERIALS USING FUSED DEPOSITION MODELING TECHNIQUE |
MATERIALPRUEFUNG/MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| CHAMPASAK P., PANAGANT N., PHOLDEE N., BUREERAT S., RAJENDRAN P., YILDIZ A. R. |
GRID-BASED MANY-OBJECTIVE OPTIMISER FOR AIRCRAFT CONCEPTUAL DESIGN WITH MULTIPLE AIRCRAFT CONFIGURATIONS |
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE |
2023 |
(SCI-Expanded) |
| RAJA B. D., PATEL, V. K., YILDIZ A. R., KOTECHA P. |
PERFORMANCE OF SCIENTIFIC LAW-INSPIRED OPTIMIZATION ALGORITHMS FOR CONSTRAINED ENGINEERING APPLICATIONS |
ENGINEERING OPTIMIZATION |
2023 |
(SCI-Expanded) |
| MENG Z., QIAN Q., XU M., YU B., YILDIZ A. R., MIRJALILI S. |
PINN-FORM: A NEW PHYSICS-INFORMED NEURAL NETWORK FOR RELIABILITY ANALYSIS WITH PARTIAL DIFFERENTIAL EQUATION |
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING |
2023 |
(SCI-Expanded) |
| GÜRSES D., MEHTA P., SAIT S. M., KUMAR S., YILDIZ A. R. |
A MULTI-STRATEGY BOOSTED PRAIRIE DOG OPTIMIZATION ALGORITHM FOR GLOBAL OPTIMIZATION OF HEAT EXCHANGERS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| MENG Z., YILDIZ B. S., LI G., ZHONG C., MIRJALILI S., YILDIZ A. R. |
APPLICATION OF STATE-OF-THE-ART MULTIOBJECTIVE METAHEURISTIC ALGORITHMS IN RELIABILITY-BASED DESIGN OPTIMIZATION: A COMPARATIVE STUDY |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2023 |
(SCI-Expanded) |
| KOPAR M., YILDIZ A. R. |
COMPOSITE DISC OPTIMIZATION USING HUNGER GAMES SEARCH OPTIMIZATION ALGORITHM |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| SAIT S. M., MEHTA P., GÜRSES D., YILDIZ A. R. |
CHEETAH OPTIMIZATION ALGORITHM FOR OPTIMUM DESIGN OF HEAT EXCHANGERS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| YILDIZ B. S., KUMAR S., PANAGANT N., MEHTA P., SAIT S. M., YILDIZ A. R., ET AL. |
A NOVEL HYBRID ARITHMETIC OPTIMIZATION ALGORITHM FOR SOLVING CONSTRAINED OPTIMIZATION PROBLEMS |
KNOWLEDGE-BASED SYSTEMS |
2023 |
(SCI-Expanded) |
| ANOSRI S., PANAGANT N., CHAMPASAK P., BUREERAT S., THIPYOPAS C., KUMAR S., ET AL. |
A COMPARATIVE STUDY OF STATE-OF-THE-ART METAHEURISTICS FOR SOLVING MANY-OBJECTIVE OPTIMIZATION PROBLEMS OF FIXED WING UNMANNED AERIAL VEHICLE CONCEPTUAL DESIGN |
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING |
2023 |
(SCI-Expanded) |
| SABANGBAN N., PANAGANT N., BUREERAT S., WANSASUEB K., KUMA S., YILDIZ A. R., ET AL. |
SIMULTANEOUS AERODYNAMIC AND STRUCTURAL OPTIMISATION OF A LOW-SPEED HORIZONTAL-AXIS WIND TURBINE BLADE USING METAHEURISTIC ALGORITHMS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| YILDIRIM A., DEMIRCI E., KARAGÖZ S., ÖZCAN S., YILDIZ A. R. |
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF CRASHWORTHINESS PERFORMANCE FOR OPTIMAL AUTOMOBILE STRUCTURES USING RESPONSE SURFACE METHODOLOGY AND OPPOSITIONAL BASED LEARNING DIFFERENTIAL EVOLUTION ALGORITHM |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| RAJA B. D., PATEL V. K., SAVSANI V. J., YILDIZ A. R. |
ON THE COMPARATIVE PERFORMANCE OF RECENT SWARM INTELLIGENCE BASED ALGORITHMS FOR OPTIMIZATION OF REAL-LIFE STERLING CYCLE OPERATED REFRIGERATION/LIQUEFACTION SYSTEM |
ARTIFICIAL INTELLIGENCE REVIEW |
2023 |
(SCI-Expanded) |
| KUMAR S., YILDIZ B. S., MEHTA P., PANAGANT N., SAIT S. M., MIRJALILI S., ET AL. |
CHAOTIC MARINE PREDATORS ALGORITHM FOR GLOBAL OPTIMIZATION OF REAL-WORLD ENGINEERING PROBLEMS |
KNOWLEDGE-BASED SYSTEMS |
2023 |
(SCI-Expanded) |
| MEHTA P., SULTAN YLLDLZ B. S., PHOLDEE N., KUMAR S., RIZA YILDIZ A. R., SAIT S. M., ET AL. |
A NOVEL GENERALIZED NORMAL DISTRIBUTION OPTIMIZER WITH ELITE OPPOSITIONAL BASED LEARNING FOR OPTIMIZATION OF MECHANICAL ENGINEERING PROBLEMS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| AYE C. M., WANSASEUB K., KUMAR S., TEJANI G. G., BUREERAT S., YILDIZ A. R., ET AL. |
AIRFOIL SHAPE OPTIMISATION USING A MULTI-FIDELITY SURROGATE-ASSISTED METAHEURISTIC WITH A NEW MULTI-OBJECTIVE INFILL SAMPLING TECHNIQUE |
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES |
2023 |
(SCI-Expanded) |
| YILDIZ B. S., PHOLDEE N., MEHTA P., SAIT S. M., KUMAR S., BUREERAT S., ET AL. |
A NOVEL HYBRID FLOW DIRECTION OPTIMIZER-DYNAMIC OPPOSITIONAL BASED LEARNING ALGORITHM FOR SOLVING COMPLEX CONSTRAINED MECHANICAL DESIGN PROBLEMS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| MENG Z., LI H., ZENG R., MIRJALILI S., YILDIZ A. R. |
AN EFFICIENT TWO-STAGE WATER CYCLE ALGORITHM FOR COMPLEX RELIABILITY-BASED DESIGN OPTIMIZATION PROBLEMS |
NEURAL COMPUTING & APPLICATIONS |
2022 |
(SCI-Expanded) |
| YILDIZ B. S., MEHTA P., PANAGANT N., MIRJALILI S., YILDIZ A. R. |
A NOVEL CHAOTIC RUNGE KUTTA OPTIMIZATION ALGORITHM FOR SOLVING CONSTRAINED ENGINEERING PROBLEMS |
JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING |
2022 |
(SCI-Expanded) |
| MENG Z., GUO L., YILDIZ A. R., WANG X. |
MIXED RELIABILITY-ORIENTED TOPOLOGY OPTIMIZATION FOR THERMO-MECHANICAL STRUCTURES WITH MULTI-SOURCE UNCERTAINTIES |
ENGINEERING WITH COMPUTERS |
2022 |
(SCI-Expanded) |
| MENG Z., YILDIZ A. R., MIRJALILI S. |
EFFICIENT DECOUPLING-ASSISTED EVOLUTIONARY/METAHEURISTIC FRAMEWORK FOR EXPENSIVE RELIABILITY-BASED DESIGN OPTIMIZATION PROBLEMS |
EXPERT SYSTEMS WITH APPLICATIONS |
2022 |
(SCI-Expanded) |
| KARADUMAN A., LEKESIZ H., YILDIZ A. R. |
MINIMIZATION OF RELEASE BEARING LOAD LOSS IN A CLUTCH SYSTEM FOR HIGH-SPEED ROTATIONS USING THE DIFFERENTIAL EVOLUTION ALGORITHM |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| CHAMPASAK P., PANAGANT N., PHOLDEE N., VIO G. A., BUREERAT S., YILDIZ B. S., ET AL. |
AIRCRAFT CONCEPTUAL DESIGN USING METAHEURISTIC-BASED RELIABILITY OPTIMISATION |
AEROSPACE SCIENCE AND TECHNOLOGY |
2022 |
(SCI-Expanded) |
| YILDIZ B. S., BUREERAT S., PANAGANT N., MEHTA P., YILDIZ A. R. |
REPTILE SEARCH ALGORITHM AND KRIGING SURROGATE MODEL FOR STRUCTURAL DESIGN OPTIMIZATION WITH NATURAL FREQUENCY CONSTRAINTS |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| YILDIZ B. S., PHOLDEE N., BUREERAT S., YILDIZ A. R., SAIT S. M. |
ENHANCED GRASSHOPPER OPTIMIZATION ALGORITHM USING ELITE OPPOSITION-BASED LEARNING FOR SOLVING REAL-WORLD ENGINEERING PROBLEMS |
ENGINEERING WITH COMPUTERS |
2022 |
(SCI-Expanded) |
| GURSES D., MEHTA P., PATEL V., SAIT S. M., YILDIZ A. R. |
ARTIFICIAL GORILLA TROOPS ALGORITHM FOR THE OPTIMIZATION OF A FINE PLATE HEAT EXCHANGER |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| YILDIZ B. S., KUMAR S., PHOLDEE N., BUREERAT S., SAIT S. M., YILDIZ A. R. |
A NEW CHAOTIC LEVY FLIGHT DISTRIBUTION OPTIMIZATION ALGORITHM FOR SOLVING CONSTRAINED ENGINEERING PROBLEMS |
EXPERT SYSTEMS |
2022 |
(SCI-Expanded) |
| MEHTA P., YILDIZ B. S., KUMAR S., PHOLDEE N., SAIT S. M., PANAGANT N., ET AL. |
A NELDER MEAD-INFUSED INFO ALGORITHM FOR OPTIMIZATION OF MECHANICAL DESIGN PROBLEMS |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| GURSES D., MEHTA P., SAIT S. M., YILDIZ A. R. |
AFRICAN VULTURES OPTIMIZATION ALGORITHM FOR OPTIMIZATION OF SHELL AND TUBE HEAT EXCHANGERS |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| YILDIZ B. S., MEHTA P., SAIT S. M., PANAGANT N., KUMAR S., YILDIZ A. R. |
A NEW HYBRID ARTIFICIAL HUMMINGBIRD-SIMULATED ANNEALING ALGORITHM TO SOLVE CONSTRAINED MECHANICAL ENGINEERING PROBLEMS |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| YILDIZ B. S., PHOLDEE N., PANAGANT N., BUREERAT S., YILDIZ A. R., SAIT S. M. |
A NOVEL CHAOTIC HENRY GAS SOLUBILITY OPTIMIZATION ALGORITHM FOR SOLVING REAL-WORLD ENGINEERING PROBLEMS |
ENGINEERING WITH COMPUTERS |
2022 |
(SCI-Expanded) |
| MEHTA P., YILDIZ B. S., SAIT S. M., YILDIZ A. R. |
GRADIENT-BASED OPTIMIZER FOR ECONOMIC OPTIMIZATION OF ENGINEERING PROBLEMS |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| YILDIZ A. R., MEHTA P. |
MANTA RAY FORAGING OPTIMIZATION ALGORITHM AND HYBRID TAGUCHI SALP SWARM-NELDER-MEAD ALGORITHM FOR THE STRUCTURAL DESIGN OF ENGINEERING COMPONENTS |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| MEHTA P., YILDIZ B. S., SAIT S. M., YILDIZ A. R. |
HUNGER GAMES SEARCH ALGORITHM FOR GLOBAL OPTIMIZATION OF ENGINEERING DESIGN PROBLEMS |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| GÜNAYDLN A. C., YLLDLZ A. R., KAYA N. |
MULTI-OBJECTIVE OPTIMIZATION OF BUILD ORIENTATION CONSIDERING SUPPORT STRUCTURE VOLUME AND BUILD TIME IN LASER POWDER BED FUSION |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| WANSASUEB K., PANMANEE S., PANAGANT N., PHOLDEE N., BUREERAT S., YILDIZ A. R. |
HYBRIDISED DIFFERENTIAL EVOLUTION AND EQUILIBRIUM OPTIMISER WITH LEARNING PARAMETERS FOR MECHANICAL AND AIRCRAFT WING DESIGN |
KNOWLEDGE-BASED SYSTEMS |
2022 |
(SCI-Expanded) |
| MENG Z., PANG Y., WU Z., REN S., YILDIZ A. R. |
A NOVEL MAXIMUM VOLUME SAMPLING MODEL FOR RELIABILITY ANALYSIS |
APPLIED MATHEMATICAL MODELLING |
2022 |
(SCI-Expanded) |
| KUNAKOTE T., SABANGBAN N., KUMAR S., TEJANI G. G., PANAGANT N., PHOLDEE N., ET AL. |
COMPARATIVE PERFORMANCE OF TWELVE METAHEURISTICS FOR WIND FARM LAYOUT OPTIMISATION |
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING |
2022 |
(SCI-Expanded) |
| KANOKMEDHAKUL Y., PANAGANT N., BUREERAT S., PHOLDEE N., YILDIZ A. R. |
AIRCRAFT CONTROL PARAMETER ESTIMATION USING SELF-ADAPTIVE TEACHING-LEARNING-BASED OPTIMIZATION WITH AN ACCEPTANCE PROBABILITY |
COMPUTATIONAL INTELLIGENCE AND NEUROSCIENCE |
2021 |
(SCI-Expanded) |
| GUPTA S., ABDERAZEK H., YILDIZ B. S., YILDIZ A. R., MIRJALILI S., SAIT S. M. |
COMPARISON OF METAHEURISTIC OPTIMIZATION ALGORITHMS FOR SOLVING CONSTRAINED MECHANICAL DESIGN OPTIMIZATION PROBLEMS |
EXPERT SYSTEMS WITH APPLICATIONS |
2021 |
(SCI-Expanded) |
| KORKMAZ F. F., SUBRAN M., YILDIZ A. R. |
OPTIMAL DESIGN OF AEROSPACE STRUCTURES USING RECENT META-HEURISTIC ALGORITHMS |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| PANAGANT N., PHOLDEE N., BUREERAT S., YILDIZ A. R., MIRJALILI S. |
A COMPARATIVE STUDY OF RECENT MULTI-OBJECTIVE METAHEURISTICS FOR SOLVING CONSTRAINED TRUSS OPTIMISATION PROBLEMS |
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING |
2021 |
(SCI-Expanded) |
| YILDIZ M., PANAGANT N., PHOLDEE N., BUREERAT S., SAIT S. M., YILDIZ A. R. |
HYBRID TAGUCHI-LEVY FLIGHT DIS-TRIBUTION OPTIMIZATION ALGORITHM FOR SOLVING REAL-WORLD DESIGN OPTIMIZATION PROBLEMS |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| ABDERAZEK H., YILDIZ A. R., SAIT S. M. |
OPTIMIZATION OF CONSTRAINED MECHANICAL DESIGN PROBLEMS USING THE EQUILIBRIUM OPTIMIZATION ALGORITHM |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| PATEL V., RAJA B., SAVSANI V., YILDIZ A. R. |
QUALITATIVE AND QUANTITATIVE PERFORMANCE COMPARISON OF RECENT OPTIMIZATION ALGORITHMS FOR ECONOMIC OPTIMIZATION OF THE HEAT EXCHANGERS |
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING |
2021 |
(SCI-Expanded) |
| GURSES D., PHOLDEE N., BUREERAT S., SAIT S. M., YILDIZ A. R. |
A NOVEL HYBRID WATER WAVE OPTIMIZATION ALGORITHM FOR SOLVING COMPLEX CONSTRAINED ENGINEERING PROBLEMS |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| YILDIZ B. S., PHOLDEE N., BUREERAT S., YILDIZ A. R., SAIT S. M. |
ROBUST DESIGN OF A ROBOT GRIPPER MECHANISM USING NEW HYBRID GRASSHOPPER OPTIMIZATION ALGORITHM |
EXPERT SYSTEMS |
2021 |
(SCI-Expanded) |
| MENG Z., LI G., WANG X., SAIT S. M., YILDIZ A. R. |
A COMPARATIVE STUDY OF METAHEURISTIC ALGORITHMS FOR RELIABILITY-BASED DESIGN OPTIMIZATION PROBLEMS |
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING |
2021 |
(SCI-Expanded) |
| ALBAK E. İ., SOLMAZ E., YILDIZ A. R., ÖZTÜRK F. |
MULTIOBJECTIVE CRASHWORTHINESS OPTIMIZATION OF GRAPHENE TYPE MULTI-CELL TUBES UNDER VARIOUS LOADING CONDITIONS |
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
2021 |
(SCI-Expanded) |
| YILDIZ B. S., PHOLDEE N., BUREERAT S., ERDAS M. U., YILDIZ A. R., SAIT S. M. |
COMPARISION OF THE POLITICAL OPTIMIZATION ALGORITHM, THE ARCHIMEDES OPTIMIZATION ALGORITHM AND THE LEVY FLIGHT ALGORITHM FOR DESIGN OPTIMIZATION IN INDUSTRY |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| YILDIZ B. S., PATEL V., PHOLDEE N., SAIT S. M., BUREERAT S., YILDIZ A. R. |
CONCEPTUAL COMPARISON OF THE ECOGEOGRAPHY-BASED ALGORITHM, EQUILIBRIUM ALGORITHM, MARINE PREDATORS ALGORITHM AND SLIME MOLD ALGORITHM FOR OPTIMAL PRODUCT DESIGN |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| DHIMAN G., SINGH K. K., SLOWIK A., CHANG V., YILDIZ A. R., KAUR A., ET AL. |
EMOSOA: A NEW EVOLUTIONARY MULTI-OBJECTIVE SEAGULL OPTIMIZATION ALGORITHM FOR GLOBAL OPTIMIZATION |
INTERNATIONAL JOURNAL OF MACHINE LEARNING AND CYBERNETICS |
2021 |
(SCI-Expanded) |
| ABDERAZEK H., HAMZA F., YILDIZ A. R., SAIT S. M. |
COMPARATIVE INVESTIGATION OF THE MOTH-FLAME ALGORITHM AND WHALE OPTIMIZATION ALGORITHM FOR OPTIMAL SPUR GEAR DESIGN |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| ABDERAZEK H., HAMZA F., YILDIZ A. R., GAO L., SAIT S. M. |
A COMPARATIVE ANALYSIS OF THE QUEUING SEARCH ALGORITHM, THE SINE-COSINE ALGORITHM, THE ANT LION ALGORITHM TO DETERMINE THE OPTIMAL WEIGHT DESIGN PROBLEM OF A SPUR GEAR DRIVE SYSTEM |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| GURES D., BUREERAT S., SAIT S. M., YILDIZ A. R. |
COMPARISON OF THE ARITHMETIC OPTIMIZATION ALGORITHM, THE SLIME MOLD OPTIMIZATION ALGORITHM, THE MARINE PREDATORS ALGORITHM, THE SALP SWARM ALGORITHM FOR REAL-WORLD ENGINEERING APPLICATIONS |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| PANAGANT N., YILDIZ M., PHOLDEE N., YILDIZ A. R., BUREERAT S., SAIT S. M. |
A NOVEL HYBRID MARINE PREDATORS-NELDER-MEAD OPTIMIZATION ALGORITHM FOR THE OPTIMAL DESIGN OF ENGINEERING PROBLEMS |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| PHNLDEE N., PATEL V. K., SAIT S. M., BUREERAT S., TILDIZ A. R. |
HYBRID SPOTTED HYENA-NELDER-MEAD OPTIMIZATION ALGORITHM FOR SELECTION OF OPTIMAL MACHINING PARAMETERS IN GRINDING OPERATIONS |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| YILDIZ A. R., ERDAS M. U. |
A NEW HYBRID TAGUCHI-SALP SWARM OPTIMIZATION ALGORITHM FOR THE ROBUST DESIGN OF REAL-WORLD ENGINEERING PROBLEMS |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| PREMKUMAR M., JANGIR P., KUMAR B. S., SOWMYA R., ALHELOU H. H., ABUALIGAH L., ET AL. |
A NEW ARITHMETIC OPTIMIZATION ALGORITHM FOR SOLVING REAL-WORLD MULTIOBJECTIVE CEC-2021 CONSTRAINED OPTIMIZATION PROBLEMS: DIVERSITY ANALYSIS AND VALIDATIONS |
IEEE ACCESS |
2021 |
(SCI-Expanded) |
| YILDIZ A. R., ABDERAZEK H., MIRJALILI S. |
A COMPARATIVE STUDY OF RECENT NON-TRADITIONAL METHODS FOR MECHANICAL DESIGN OPTIMIZATION |
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING |
2020 |
(SCI-Expanded) |
| YILDIZ B. S., PHOLDEE N., BUREERAT S., YILDIZ A. R., SAIT S. M. |
SINE-COSINE OPTIMIZATION ALGORITHM FOR THE CONCEPTUAL DESIGN OF AUTOMOBILE COMPONENTS |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| ASLAN B., YILDIZ A. R. |
OPTIMUM DESIGN OF AUTOMOBILE COMPONENTS USING LATTICE STRUCTURES FOR ADDITIVE MANUFACTURING |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| PANAGANT N., PHOLDEE N., BUREERAT S., YILDIZ A. R., SAIT S. M. |
SEAGULL OPTIMIZATION ALGORITHM FOR SOLVING REAL-WORLD DESIGN OPTIMIZATION PROBLEMS |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| OZKAYA H., YILDIZ M., YILDIZ A. R., BUREERAT S., YILDIZ B. S., SAIT S. M. |
THE EQUILIBRIUM OPTIMIZATION ALGORITHM AND THE RESPONSE SURFACE BASED METAMODEL FOR OPTIMAL STRUCTURAL DESIGN OF VEHICLE COMPONENTS |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| CHAMPASAK P., PANAGANT N., PHOLDEE N., BUREERAT S., YILDIZ A. R. |
SELF-ADAPTIVE MANY-OBJECTIVE META-HEURISTIC BASED ON DECOMPOSITION FOR MANY-OBJECTIVE CONCEPTUAL DESIGN OF A FIXED WING UNMANNED AERIAL VEHICLE |
AEROSPACE SCIENCE AND TECHNOLOGY |
2020 |
(SCI-Expanded) |
| KARADERE G., DUZCAN Y., YILDIZ A. R. |
LIGHT-WEIGHT DESIGN OF AUTOMOBILE SUSPENSION COMPONENTS USING TOPOLOGY AND SHAPE OPTIMIZATION TECHNIQUES |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| YILDIZ B. S., YILDIZ A. R., ALBAK E. İ., ABDERAZEK H., SAIT S. M., BUREERAT S. |
BUTTERFLY OPTIMIZATION ALGORITHM FOR OPTIMUM SHAPE DESIGN OF AUTOMOBILE SUSPENSION COMPONENTS |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| BALKAN A., YILDIZ A. R., SAIT S. M., BUREERAT S. |
OPTIMUM DESIGN OF AN AIR SUSPENSION SEAT USING RECENT STRUCTURAL OPTIMIZATION TECHNIQUES |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| YILDIZ B. S., YILDIZ A. R., PHOLDEE N., BUREERAT S., SAIT S. M., PATEL V. |
THE HENRY GAS SOLUBILITY OPTIMIZATION ALGORITHM FOR OPTIMUM STRUCTURAL DESIGN OF AUTOMOBILE BRAKE COMPONENTS |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| KURTULUS D., YILDIZ A. R., SAIT S. M., BUREERAT S., KAEN K. |
A NOVEL HYBRID HARRIS HAWKS-SIMULATED ANNEALING ALGORITHM AND RBF-BASED METAMODEL FOR DESIGN OPTIMIZATION OF HIGHWAY GUARDRAILS |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| ABDERAZEK H., YILDIZ A. R., MIRJALILI S. |
COMPARISON OF RECENT OPTIMIZATION ALGORITHMS FOR DESIGN OPTIMIZATION OF A CAM-FOLLOWER MECHANISM |
KNOWLEDGE-BASED SYSTEMS |
2020 |
(SCI-Expanded) |
| YILDIZ A. R. |
A NOVEL HYBRID WHALE-NELDER-MEAD ALGORITHM FOR OPTIMIZATION OF DESIGN AND MANUFACTURING PROBLEMS |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2019 |
(SCI-Expanded) |
| YILDIZ A. R., YILDIZ B. S., SAIT S. M., BUREERAT S., PHOLDEE N. |
A NEW HYBRID HARRIS HAWKS-NELDER-MEAD OPTIMIZATION ALGORITHM FOR SOLVING DESIGN AND MANUFACTURING PROBLEMS |
MATERIALS TESTING |
2019 |
(SCI-Expanded) |
| YILDIZ A. R., YILDIZ B. S., SAIT S. M., LI X. |
THE HARRIS HAWKS, GRASSHOPPER AND MULTI-VERSE OPTIMIZATION ALGORITHMS FOR THE SELECTION OF OPTIMAL MACHINING PARAMETERS IN MANUFACTURING OPERATIONS |
MATERIALS TESTING |
2019 |
(SCI-Expanded) |
| YILDIZ B. S., YILDIZ A. R. |
THE HARRIS HAWKS OPTIMIZATION ALGORITHM, SALP SWARM ALGORITHM, GRASSHOPPER OPTIMIZATION ALGORITHM AND DRAGONFLY ALGORITHM FOR STRUCTURAL DESIGN OPTIMIZATION OF VEHICLE COMPONENTS |
MATERIALS TESTING |
2019 |
(SCI-Expanded) |
| DEMIRCI E., YILDIZ A. R. |
A NEW HYBRID APPROACH FOR RELIABILITY-BASED DESIGN OPTIMIZATION OF STRUCTURAL COMPONENTS |
MATERIALS TESTING |
2019 |
(SCI-Expanded) |
| AYE C. M., PHOLDEE N., YILDIZ A. R., BUREERAT S., SAIT S. M. |
MULTI-SURROGATE-ASSISTED METAHEURISTICS FOR CRASHWORTHINESS OPTIMISATION |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2019 |
(SCI-Expanded) |
| PANAGANT N., PHOLDEE N., WANSASUEB K., BUREERAT S., YILDIZ A. R., SAIT S. M. |
COMPARISON OF RECENT ALGORITHMS FOR MANY-OBJECTIVE OPTIMISATION OF AN AUTOMOTIVE FLOOR-FRAME |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2019 |
(SCI-Expanded) |
| ABDERAZEK H., SAIT S. M., YILDIZ A. R. |
OPTIMAL DESIGN OF PLANETARY GEAR TRAIN FOR AUTOMOTIVE TRANSMISSIONS USING ADVANCED META-HEURISTICS |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2019 |
(SCI-Expanded) |
| SARANGKUM R., WANSASUEB K., PANAGANT N., PHOLDEE N., BUREERAT S., YILDIZ A. R., ET AL. |
AUTOMATED DESIGN OF AIRCRAFT FUSELAGE STIFFENERS USING MULTIOBJECTIVE EVOLUTIONARY OPTIMISATION |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2019 |
(SCI-Expanded) |
| KARADUMAN A., YILDIZ B. S., YILDIZ A. R. |
EXPERIMENTAL AND NUMERICAL FATIGUE-BASED DESIGN OPTIMISATION OF CLUTCH DIAPHRAGM SPRING IN THE AUTOMOTIVE INDUSTRY |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2019 |
(SCI-Expanded) |
| ABDERAZEK H., YILDIZ A. R., SAIT S. M. |
MECHANICAL ENGINEERING DESIGN OPTIMISATION USING NOVEL ADAPTIVE DIFFERENTIAL EVOLUTION ALGORITHM |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2019 |
(SCI-Expanded) |
| YILDIZ A. R., KILICARPA U. A., DEMIRCI E., DOGAN M. |
TOPOGRAPHY AND TOPOLOGY OPTIMIZATION OF DIESEL ENGINE COMPONENTS FOR LIGHT-WEIGHT DESIGN IN THE AUTOMOTIVE INDUSTRY |
MATERIALS TESTING |
2019 |
(SCI-Expanded) |
| HAMZA F., ABDERAZEK H., LAKHDAR S., FERHAT D., YILDIZ A. R. |
OPTIMUM DESIGN OF CAM-ROLLER FOLLOWER MECHANISM USING A NEW EVOLUTIONARY ALGORITHM |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2018 |
(SCI-Expanded) |
| DEMIRCI E., YILDIZ A. R. |
AN INVESTIGATION OF THE CRASH PERFORMANCE OF MAGNESIUM, ALUMINUM AND ADVANCED HIGH STRENGTH STEELS AND DIFFERENT CROSS-SECTIONS FOR VEHICLE THIN WALLED ENERGY ABSORBERS |
MATERIALS TESTING |
2018 |
(SCI-Expanded) |
| DEMIRCI E., YILDIZ A. R. |
AN EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE EFFECTS OF GEOMETRY AND SPOT WELDS ON THE CRASHWORTHINESS OF VEHICLE THIN-WALLED STRUCTURES |
MATERIALS TESTING |
2018 |
(SCI-Expanded) |
| GULER T., DEMIRCI E., YILDIZ A. R., YAVUZ U. |
LIGHTWEIGHT DESIGN OF AN AUTOMOBILE HINGE COMPONENT USING GLASS FIBER POLYAMIDE COMPOSITES |
MATERIALS TESTING |
2018 |
(SCI-Expanded) |
| YILDIZ B. S., YILDIZ A. R. |
COMPARISON OF GREY WOLF, WHALE, WATER CYCLE, ANT LION AND SINE-COSINE ALGORITHMS FOR THE OPTIMIZATION OF A VEHICLE ENGINE CONNECTING ROD |
MATERIALS TESTING |
2018 |
(SCI-Expanded) |
| YILDIZ B. S., YILDIZ A. R. |
MOTH-FLAME OPTIMIZATION ALGORITHM TO DETERMINE OPTIMAL MACHINING PARAMETERS IN MANUFACTURING PROCESSES |
MATERIALS TESTING |
2017 |
(SCI-Expanded) |
| YILDIZ A. R. |
PREFACE |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2017 |
(SCI-Expanded) |
| KARAGOZ S., YILDIZ A. R. |
A COMPARISON OF RECENT METAHEURISTIC ALGORITHMS FOR CRASHWORTHINESS OPTIMISATION OF VEHICLE THIN-WALLED TUBES CONSIDERING SHEET METAL FORMING EFFECTS |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2017 |
(SCI-Expanded) |
| PHOLDEE N., BUREERAT S., YILDIZ A. R. |
HYBRID REAL-CODE POPULATION-BASED INCREMENTAL LEARNING AND DIFFERENTIAL EVOLUTION FOR MANY-OBJECTIVE OPTIMISATION OF AN AUTOMOTIVE FLOOR-FRAME |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2017 |
(SCI-Expanded) |
| KIANI M., YILDIZ A. R. |
A COMPARATIVE STUDY OF NON-TRADITIONAL METHODS FOR VEHICLE CRASHWORTHINESS AND NVH OPTIMIZATION |
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING |
2016 |
(SCI-Expanded) |
| YILDIZ B. S., LEKESIZ H., YILDIZ A. R. |
STRUCTURAL DESIGN OF VEHICLE COMPONENTS USING GRAVITATIONAL SEARCH AND CHARGED SYSTEM SEARCH ALGORITHMS |
MATERIALS TESTING |
2016 |
(SCI-Expanded) |
| YILDIZ A. R., KURTULUS E., DEMIRCI E., YILDIZ B. S., KARAGOZ S. |
OPTIMIZATION OF THIN-WALL STRUCTURES USING HYBRID GRAVITATIONAL SEARCH AND NELDER-MEAD ALGORITHM |
MATERIALS TESTING |
2016 |
(SCI-Expanded) |
| YILDIZ A. R. |
OPTIMIZATION OF MULTI-PASS TURNING OPERATIONS USING HYBRID TEACHING LEARNING-BASED APPROACH |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2013 |
(SCI-Expanded) |
| YILDIZ A. R. |
A NEW HYBRID ARTIFICIAL BEE COLONY ALGORITHM FOR ROBUST OPTIMAL DESIGN AND MANUFACTURING |
APPLIED SOFT COMPUTING |
2013 |
(SCI-Expanded) |
| YILDIZ A. R. |
A NEW HYBRID DIFFERENTIAL EVOLUTION ALGORITHM FOR THE SELECTION OF OPTIMAL MACHINING PARAMETERS IN MILLING OPERATIONS |
APPLIED SOFT COMPUTING |
2013 |
(SCI-Expanded) |
| YILDIZ A. R. |
HYBRID TAGUCHI-DIFFERENTIAL EVOLUTION ALGORITHM FOR OPTIMIZATION OF MULTI-PASS TURNING OPERATIONS |
APPLIED SOFT COMPUTING |
2013 |
(SCI-Expanded) |
| YILDIZ A. R. |
OPTIMIZATION OF CUTTING PARAMETERS IN MULTI-PASS TURNING USING ARTIFICIAL BEE COLONY-BASED APPROACH |
INFORMATION SCIENCES |
2013 |
(SCI-Expanded) |
| YILDIZ A. R. |
CUCKOO SEARCH ALGORITHM FOR THE SELECTION OF OPTIMAL MACHINING PARAMETERS IN MILLING OPERATIONS |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2013 |
(SCI-Expanded) |
| YILDIZ A. R. |
COMPARISON OF EVOLUTIONARY-BASED OPTIMIZATION ALGORITHMS FOR STRUCTURAL DESIGN OPTIMIZATION |
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE |
2013 |
(SCI-Expanded) |
| YILDIZ A. R. |
A COMPARATIVE STUDY OF POPULATION-BASED OPTIMIZATION ALGORITHMS FOR TURNING OPERATIONS |
INFORMATION SCIENCES |
2012 |
(SCI-Expanded) |
| YILDIZ A. R., SOLANKI K. N. |
MULTI-OBJECTIVE OPTIMIZATION OF VEHICLE CRASHWORTHINESS USING A NEW PARTICLE SWARM BASED APPROACH |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2012 |
(SCI-Expanded) |
| DURGUN I., YILDIZ A. R. |
STRUCTURAL DESIGN OPTIMIZATION OF VEHICLE COMPONENTS USING CUCKOO SEARCH ALGORITHM |
MATERIALS TESTING |
2012 |
(SCI-Expanded) |
| YILDIZ A. R. |
A NEW HYBRID PARTICLE SWARM OPTIMIZATION APPROACH FOR STRUCTURAL DESIGN OPTIMIZATION IN THE AUTOMOTIVE INDUSTRY |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING |
2012 |
(SCI-Expanded) |
| GÖKDAĞ H., YILDIZ A. R. |
STRUCTURAL DAMAGE DETECTION USING MODAL PARAMETERS AND PARTICLE SWARM OPTIMIZATION |
MATERIALS TESTING |
2012 |
(SCI-Expanded) |
| YILDIZ A. R., SAITOU K. |
TOPOLOGY SYNTHESIS OF MULTICOMPONENT STRUCTURAL ASSEMBLIES IN CONTINUUM DOMAINS |
JOURNAL OF MECHANICAL DESIGN |
2011 |
(SCI-Expanded) |
| YILDIZ A. R., ÖZTÜRK F. |
HYBRID TAGUCHI-HARMONY SEARCH APPROACH FOR SHAPE OPTIMIZATION |
RECENT ADVANCES IN HARMONY SEARCH ALGORITHM |
2010 |
(SCI-Expanded) |
| YILDIZ A. R. |
A NEW DESIGN OPTIMIZATION FRAMEWORK BASED ON IMMUNE ALGORITHM AND TAGUCHI'S METHOD |
COMPUTERS IN INDUSTRY |
2009 |
(SCI-Expanded) |
| YILDIZ A. R. |
A NOVEL HYBRID IMMUNE ALGORITHM FOR GLOBAL OPTIMIZATION IN DESIGN AND MANUFACTURING |
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING |
2009 |
(SCI-Expanded) |
| YILDIZ A. R. |
AN EFFECTIVE HYBRID IMMUNE-HILL CLIMBING OPTIMIZATION APPROACH FOR SOLVING DESIGN AND MANUFACTURING OPTIMIZATION PROBLEMS IN INDUSTRY |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
2009 |
(SCI-Expanded) |
| YILDIZ A. R. |
HYBRID IMMUNE-SIMULATED ANNEALING ALGORITHM FOR OPTIMAL DESIGN AND MANUFACTURING |
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY |
2009 |
(SCI-Expanded) |
| YILDIZ A. R. |
A NOVEL PARTICLE SWARM OPTIMIZATION APPROACH FOR PRODUCT DESIGN AND MANUFACTURING |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2009 |
(SCI-Expanded) |
| YILDIZ A. R. |
OPTIMAL STRUCTURE DESIGN OF VEHICLE COMPONENTS USING TOPOLOGY DESIGN AND OPTIMIZATION |
MATERIALPRUFUNG |
2008 |
(SCI-Expanded) |
| YILDIZ A. R. |
HYBRID TAGUCHI-HARMONY SEARCH ALGORITHM FOR SOLVING ENGINEERING OPTIMIZATION PROBLEMS |
INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING-THEORY APPLICATIONS AND PRACTICE |
2008 |
(SCI-Expanded) |
| YILDIZ A. R., OZTURK N., KAYA N., ÖZTÜRK F. |
HYBRID MULTI-OBJECTIVE SHAPE DESIGN OPTIMIZATION USING TAGUCHI'S METHOD AND GENETIC ALGORITHM |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2007 |
(SCI-Expanded) |
| YILDIZ A. R., OZTURK F. |
HYBRID ENHANCED GENETIC ALGORITHM TO SELECT OPTIMAL MACHINING PARAMETERS IN TURNING OPERATION |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE |
2006 |
(SCI-Expanded) |
| KAREN I., YILDIZ A. R., KAYA N., OEZTUERK N., OEZTUERK F. |
HYBRID APPROACH FOR GENETIC ALGORITHM AND TAGUCHI'S METHOD BASED DESIGN OPTIMIZATION IN THE AUTOMOTIVE INDUSTRY |
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH |
2006 |
(SCI-Expanded) |
| OEZTUERK N., YILDIZ A. R., KAYA N., OEZTUERK F. |
NEURO-GENETIC DESIGN OPTIMIZATION FRAMEWORK TO SUPPORT THE INTEGRATED ROBUST DESIGN OPTIMIZATION PROCESS IN CE |
CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS |
2006 |
(SCI-Expanded) |
| YILDIZ A. R., KAYA N., OZTURK F. |
OPTIMAL DESIGN OF VEHICLE COMPONENTS USING TOPOLOGY DESIGN AND OPTIMISATION |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2004 |
(SCI-Expanded) |
| YILDIZ A. R., OZTURK N., KAYA N., OZTURK F. |
INTEGRATED OPTIMAL TOPOLOGY DESIGN AND SHAPE OPTIMIZATION USING NEURAL NETWORKS |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2003 |
(SCI-Expanded) |
| MUMCU A. G., AVCI A. |
PARAMETRIC AND GENERAL EVALUATION OF MATHEMATICAL MODELS USED FOR CRITICAL DIAMETER DETERMINATION IN CYCLONE SEPARATORS |
SEPARATIONS |
2023 |
(SCI-Expanded) |
| SÜRMEN A., KARAMANGİL M. İ., AVCI A., DIRIM B., IŞIKLI F., TEKİN M. E., ET AL. |
EXPERIMENTAL ANALYSIS OF THE VOLUMETRIC AND THERMAL EFFICIENCY PERFORMANCE OF A NOVEL DIRECT PIEZO-ACTING CVVT MECHANISM |
INTERNATIONAL JOURNAL OF GREEN ENERGY |
2023 |
(SCI-Expanded) |
| CALISKAN M. E., KARAGÖZ İ., AVCI A., SÜRMEN A. |
INVESTIGATION INTO THE EFFECTS OF VARIOUS PARAMETERS ON THE PERFORMANCE AND CLASSIFICATION POTENTIAL OF A CYCLONE CLASSIFIER |
POWDER TECHNOLOGY |
2019 |
(SCI-Expanded) |
| AVCI A., KARAGOZ İ. |
A NEW EXPLICIT FRICTION FACTOR FORMULA FOR LAMINAR, TRANSITION AND TURBULENT FLOWS IN SMOOTH AND ROUGH PIPES |
EUROPEAN JOURNAL OF MECHANICS B-FLUIDS |
2019 |
(SCI-Expanded) |
| SAKIN A., KARAGÖZ İ., AVCI A. |
EFFECTS OF SEPARATION SPACE DIAMETER ON THE PERFORMANCE OF A NOVEL REVERSE FLOW CYCLONE |
SEPARATION SCIENCE AND TECHNOLOGY |
2019 |
(SCI-Expanded) |
| SAKIN A., KARAGÖZ İ., AVCI A. |
PERFORMANCE ANALYSIS OF AXIAL AND REVERSE FLOW CYCLONE SEPARATORS |
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION |
2019 |
(SCI-Expanded) |
| CALISKAN M. E., KARAGÖZ İ., AVCI A., SÜRMEN A. |
AN EXPERIMENTAL INVESTIGATION INTO THE PARTICLE CLASSIFICATION CAPABILITY OF A NOVEL CYCLONE SEPARATOR |
SEPARATION AND PURIFICATION TECHNOLOGY |
2019 |
(SCI-Expanded) |
| SÜRMEN A., ARSLAN R., KOPMAZ O., AVCI A., KARAGÖZ İ., KARAMANGİL M. İ. |
DEVELOPMENT OF A VARIABLE-PROFILE CAM TO ENHANCE THE VOLUMETRIC EFFICIENCY OF IC ENGINES |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2017 |
(SCI-Expanded) |
| TAN F., KARAGÖZ İ., AVCI A. |
EFFECTS OF GEOMETRICAL PARAMETERS ON THE PRESSURE DROP FOR A MODIFIED CYCLONE SEPARATOR |
CHEMICAL ENGINEERING & TECHNOLOGY |
2016 |
(SCI-Expanded) |
| TAN F., KARAGÖZ İ., AVCI A. |
THE EFFECTS OF VORTEX FINDER DIMENSIONS ON THE NATURAL VORTEX LENGTH IN A NEW CYCLONE SEPARATOR |
CHEMICAL ENGINEERING COMMUNICATIONS |
2016 |
(SCI-Expanded) |
| ARABACIGIL B., YÜKSEL N., AVCI A. |
THE USE OF PARAFFIN WAX IN A NEW SOLAR COOKER WITH INNER AND OUTER REFLECTORS |
THERMAL SCIENCE |
2015 |
(SCI-Expanded) |
| SENDOGAN O., KARAGÖZ İ., AVCI A., SÜRMEN A. |
EXPERIMENTAL INVESTIGATION INTO PERFORMANCE CHARACTERISTICS OF REVERSED FLOW CYCLONE SEPARATORS |
INTERNATIONAL JOURNAL OF GLOBAL WARMING |
2014 |
(SCI-Expanded) |
| KARAGÖZ İ., AVCI A., SÜRMEN A., SENDOGAN O. |
DESIGN AND PERFORMANCE EVALUATION OF A NEW CYCLONE SEPARATOR |
JOURNAL OF AEROSOL SCIENCE |
2013 |
(SCI-Expanded) |
| AVCI A., KARAGÖZ İ., SÜRMEN A. |
DEVELOPMENT OF A NEW METHOD FOR EVALUATING VORTEX LENGTH IN REVERSED FLOW CYCLONE SEPARATORS |
POWDER TECHNOLOGY |
2013 |
(SCI-Expanded) |
| AVCI A., KARAGÖZ İ., SÜRMEN A., CAMUZ I. |
EXPERIMENTAL INVESTIGATION OF THE NATURAL VORTEX LENGTH IN TANGENTIAL INLET CYCLONES |
SEPARATION SCIENCE AND TECHNOLOGY |
2013 |
(SCI-Expanded) |
| YÜKSEL N., ARABACIGIL B., AVCI A. |
THE THERMAL ANALYSIS OF PARAFFIN WAX IN A BOX-TYPE SOLAR COOKER |
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY |
2012 |
(SCI-Expanded) |
| YUKSEL N., AVCI A., KILIÇ M. |
THE EFFECTIVE THERMAL CONDUCTIVITY OF INSULATION MATERIALS REINFORCED WITH ALUMINIUM FOIL AT LOW TEMPERATURES |
HEAT AND MASS TRANSFER |
2012 |
(SCI-Expanded) |
| SURMEN A., AVCI A., KARAMANGİL M. İ. |
PREDICTION OF THE MAXIMUM-EFFICIENCY CYCLONE LENGTH FOR A CYCLONE WITH A TANGENTIAL ENTRY |
POWDER TECHNOLOGY |
2011 |
(SCI-Expanded) |
| KAYA F., KARAGÖZ İ., AVCI A. |
EFFECTS OF SURFACE ROUGHNESS ON THE PERFORMANCE OF TANGENTIAL INLET CYCLONE SEPARATORS |
AEROSOL SCIENCE AND TECHNOLOGY |
2011 |
(SCI-Expanded) |
| KARAGÖZ İ., AVCI A. |
CLOSURE TO "DISCUSSION: 'A NOVEL EXPLICIT EQUATION FOR FRICTION FACTOR IN SMOOTH AND ROUGH PIPES' " (2011, ASME J. FLUIDS ENG., 133, P. 015501) |
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME |
2011 |
(SCI-Expanded) |
| YUKSEL N., AVCI A. |
THE PRESENT STUDIES ON EFFECTIVE THERMAL CONDUCTIVITIES OF POROUS MEDIUMS |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2010 |
(SCI-Expanded) |
| KARAGÖZ İ., KAYA F., AVCI A. |
USABILITY OF CYCLONE SEPARATORS AS AIR FILTERS IN VEHICLES |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2010 |
(SCI-Expanded) |
| AVCI A., KARAGÖZ İ. |
A NOVEL EXPLICIT EQUATION FOR FRICTION FACTOR IN SMOOTH AND ROUGH PIPES |
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME |
2009 |
(SCI-Expanded) |
| KARAMANGİL M. İ., AVCI A., BILAL H. |
INVESTIGATION OF THE EFFECT OF DIFFERENT CARBON FILM THICKNESS ON THE EXHAUST VALVE |
HEAT AND MASS TRANSFER |
2008 |
(SCI-Expanded) |
| YUKSEL N., AVCI A., KILIC M. |
A MODEL FOR LATENT HEAT ENERGY STORAGE SYSTEMS |
INTERNATIONAL JOURNAL OF ENERGY RESEARCH |
2006 |
(SCI-Expanded) |
| KARAGOZ İ., AVCI A. |
MODELLING OF THE PRESSURE DROP IN TANGENTIAL INLET CYCLONE SEPARATORS |
AEROSOL SCIENCE AND TECHNOLOGY |
2005 |
(SCI-Expanded) |
| AVCI A., KARAGOZ İ. |
EFFECTS OF FLOW AND GEOMETRICAL PARAMETERS ON THE COLLECTION EFFICIENCY IN CYCLONE SEPARATORS |
JOURNAL OF AEROSOL SCIENCE |
2003 |
(SCI-Expanded) |
| AVCI A., KARAGOZ İ. |
THEORETICAL INVESTIGATION OF PRESSURE LOSSES IN CYCLONE SEPARATORS |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2001 |
(SCI-Expanded) |
| AVCI A., KARAGOZ İ. |
A MATHEMATICAL MODEL FOR THE DETERMINATION OF A CYCLONE PERFORMANCE |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2000 |
(SCI-Expanded) |
| AVCI A., CAN M. |
THE ANALYSIS OF THE DRYING PROCESS ON UNSTEADY FORCED CONVECTION IN THIN FILMS OF INK |
APPLIED THERMAL ENGINEERING |
1999 |
(SCI-Expanded) |
| ÇELİK A. G., PULAT E., SOKMEN F., BALKAN C., COŞKUN S. |
NUMERICAL AND EXPERIMENTAL INVESTIGATION OF ENERGY EFFICIENCY BY APPLYING PHASE CHANGE MATERIAL TO OPEN VERTICAL TYPE REFRIGERATED DISPLAY CABINET |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2023 |
(SCI-Expanded) |
| YALÇINSOY E., ATEŞ M., PULAT E. |
COMPUTATIONAL INVESTIGATION OF BACKWARD FACING STEP EFFECT ON HEAT TRANSFER FROM FLUSH MOUNTED ELECTRONIC CHIPS IN TURBULENT FLOW TÜRBÜLANSLI AKIŞTA YÜZEYLE AYNI HIZADA MONTE EDILMIŞ ELEKTRONIK YONGALARDAN OLAN ISI TRANSFERI ÜZERINE GERI BASAMAK ETKISININ HESAPLAMALI OLARAK ARAŞTIRILMASI |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2023 |
(SCI-Expanded) |
| BEYAZOGLU E., YUCE B. E., ATES M., YALINDAĞ R., SOKMEN K. F., PULAT E. |
COOLING OF HEATED BLOCKS WITH TRIANGULAR GUIDE PROTRUSIONS SIMULATING PRINTED CIRCUIT BOARDS |
SUSTAINABILITY (SWITZERLAND) |
2022 |
(SCI-Expanded) |
| PULAT E., BEYAZOGLU E. |
COMPUTATIONAL INVESTIGATION OF CONFINED WALL INCLINATION EFFECTS ON IMPINGING JET FLUID FLOW AND HEAT TRANSFER |
INTERNATIONAL JOURNAL OF THERMAL SCIENCES |
2021 |
(SCI-Expanded) |
| PULAT E., YUCE B. E. |
A PARAMETRIC STUDY ON THE EFFECT OF BLOWING PARAMETERS OF SPLIT-TYPE AIR CONDITIONERS ON THERMAL COMFORT AND VENTILATION |
HEAT TRANSFER RESEARCH |
2021 |
(SCI-Expanded) |
| YUCE B. E., PULAT E. |
FORCED, NATURAL AND MIXED CONVECTION BENCHMARK STUDIES FOR INDOOR THERMAL ENVIRONMENTS |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2018 |
(SCI-Expanded) |
| PULAT E., ERSAN H. A. |
NUMERICAL SIMULATION OF TURBULENT AIRFLOW IN A VENTILATED ROOM: INLET TURBULENCE PARAMETERS AND SOLUTION MULTIPLICITY |
ENERGY AND BUILDINGS |
2015 |
(SCI-Expanded) |
| SOKMEN K. F., PULAT E., YAMANKARADENİZ N., COŞKUN S. |
LED JUNCTION AND HEATSINK NUMBER CALCULATION WITH COMPUTATIONAL FLUIDS DYNAMIC (CFD) |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2015 |
(SCI-Expanded) |
| SOKMEN K. F., PULAT E., YAMANKARADENİZ N., COŞKUN S. |
THERMAL COMPUTATIONS OF TEMPERATURE DISTRIBUTION AND BULB HEAT TRANSFER IN AN AUTOMOBILE HEADLAMP |
HEAT AND MASS TRANSFER |
2014 |
(SCI-Expanded) |
| COŞKUN S., MOTORCU A. R., YAMANKARADENİZ N., PULAT E. |
EVALUATION OF CONTROL PARAMETERS' EFFECTS ON SYSTEM PERFORMANCE WITH TAGUCHI METHOD IN WASTE HEAT RECOVERY APPLICATION USING MECHANICAL HEAT PUMP |
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID |
2012 |
(SCI-Expanded) |
| PULAT E., COŞKUN S., ÜNLÜ K., YAMANKARADENİZ N. |
EXPERIMENTAL STUDY OF HORIZONTAL GROUND SOURCE HEAT PUMP PERFORMANCE FOR MILD CLIMATE IN TURKEY |
ENERGY |
2009 |
(SCI-Expanded) |
| KAYNAKLI Ö., PULAT E., KILIC M. |
THERMAL COMFORT DURING HEATING AND COOLING PERIODS IN AN AUTOMOBILE |
HEAT AND MASS TRANSFER |
2005 |
(SCI-Expanded) |
| KUCUKOGLU A., YÜCE C., SOZER I. E., KARPAT F. |
MULTI-RESPONSE OPTIMIZATION FOR LASER TRANSMISSION WELDING OF PMMA TO ABS USING TAGUCHI-BASED TOPSIS METHOD |
ADVANCES IN MECHANICAL ENGINEERING |
2023 |
(SCI-Expanded) |
| SAVRAN E., KALAY O. C., ALP N. B., KARPAT F. |
DESIGN AND ANALYSIS OF LATTICE STRUCTURE APPLIED HUMERUS SEMI-PROSTHESIS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| KALAY O. C., KARPAT E., DIRIK A. E., KARPAT F. |
A ONE-DIMENSIONAL CONVOLUTIONAL NEURAL NETWORK-BASED METHOD FOR DIAGNOSIS OF TOOTH ROOT CRACKS IN ASYMMETRIC SPUR GEAR PAIRS |
MACHINES |
2023 |
(SCI-Expanded) |
| KALAY O. C., DOGAN O., YÜCE C., KARPAT F. |
EFFECTS OF TOOTH ROOT CRACKS ON VIBRATION AND DYNAMIC TRANSMISSION ERROR RESPONSES OF ASYMMETRIC GEARS: A COMPARATIVE STUDY |
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES |
2023 |
(SCI-Expanded) |
| DOGAN O., KALAY O. C., KARPAT F. |
INFLUENCE OF TOOTH ROOT CRACKS ON THE MESH STIFFNESS OF ASYMMETRIC SPUR GEAR PAIR WITH DIFFERENT BACKUP RATIOS |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
2023 |
(SCI-Expanded) |
| KALAY O. C., YUCE C., DOĞAN O., YILMAZ T. G., KARPAT E., KOPMAZ O., ET AL. |
FATIGUE PERFORMANCES OF HELICOPTER GEARS |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| YILMAZ T. G., KARADERE G., KARPAT F. |
A NUMERICAL ANALYSIS OF HYBRID SPUR GEARS WITH ASYMMETRIC TEETH: STRESS AND DYNAMIC BEHAVIOR |
MACHINES |
2022 |
(SCI-Expanded) |
| YUCE C., DOGAN O., KARPAT F. |
EFFECTS OF ASYMMETRIC TOOTH PROFILE ON SINGLE-TOOTH STIFFNESS OF POLYMER GEARS |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| YILMAZ T. G., DOĞAN O., KARPAT F. |
A NUMERICAL INVESTIGATION ON THE HYBRID SPUR GEARS: STRESS AND DYNAMIC ANALYSIS |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS |
2022 |
(SCI-Expanded) |
| KALAY O. C., KARAMAN H., KARPAT F., DOGAN O., YÜCE C., KARPAT E., ET AL. |
A COMPARATIVE 3D FINITE ELEMENT COMPUTATIONAL STUDY OF STRESS DISTRIBUTION AND STRESS TRANSFER IN SMALL-DIAMETER CONICAL DENTAL IMPLANTS |
TEHNICKI VJESNIK-TECHNICAL GAZETTE |
2021 |
(SCI-Expanded) |
| KURTULUS E., SAPMAZ I., KARPAT F. |
EFFECT OF THE COOLING PROCESS ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURAL BEHAVIOR OF EXTRUDED AZ31 AND AM50 MG ALLOYS |
MATERIALPRUEFUNG/MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| DOGAN O., YUCE C., KARPAT F. |
EFFECTS OF RIM THICKNESS AND DRIVE SIDE PRESSURE ANGLE ON GEAR TOOTH ROOT STRESS AND FATIGUE CRACK PROPAGATION LIFE |
ENGINEERING FAILURE ANALYSIS |
2021 |
(SCI-Expanded) |
| KALAY O. C., DOĞAN O., YILMAZ T. G., YÜCE C., KARPAT F. |
A COMPARATIVE EXPERIMENTAL STUDY ON THE IMPACT STRENGTH OF STANDARD AND ASYMMETRIC INVOLUTE SPUR GEARS |
MEASUREMENT |
2021 |
(SCI-Expanded) |
| DOĞAN O., KARPAT F., KOPMAZ O., EKWARO-OSIRE S. |
INFLUENCES OF GEAR DESIGN PARAMETERS ON DYNAMIC TOOTH LOADS AND TIME-VARYING MESH STIFFNESS OF INVOLUTE SPUR GEARS |
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES |
2020 |
(SCI-Expanded) |
| KHANDAKER M., MOUSSA A. A., SAMA D. N., SAFAVINIA F., HAZRA S., KALAY O. C., ET AL. |
LASER-INDUCED MICROGROOVES IMPROVE THE MECHANICAL RESPONSES OF CEMENTED IMPLANT SYSTEMS |
MICROMACHINES |
2020 |
(SCI-Expanded) |
| ALP N. B., KALELI T., KALAY O. C., KARPAT F., AKDAG G., MACUNLUOGLU A. C., ET AL. |
THE EFFECT OF HAMATUM CURVATURE ANGLE ON CARPAL TUNNEL VOLUMETRY: A MATHEMATICAL SIMULATION MODEL |
COMPUTATIONAL AND MATHEMATICAL METHODS IN MEDICINE |
2020 |
(SCI-Expanded) |
| ALP N. B., DOĞAN O., YILMAZ T. G., KALAY O. C., MOUSSA A. A., KARPAT F., ET AL. |
UNDERSTANDING THE CAUSES BEHIND CORACOID GRAFT OSTEOLYSIS IN LATARJET PROCEDURE (FINITE ELEMENT ANALYSIS AND COMPARISON OF THREE FIXATION METHODS) |
ORTHOPAEDICS & TRAUMATOLOGY-SURGERY & RESEARCH |
2020 |
(SCI-Expanded) |
| KARPAT F., YUCE C., DUGAN O. |
EXPERIMENTAL MEASUREMENT AND NUMERICAL VALIDATION OF SINGLE TOOTH STIFFNESS FOR INVOLUTE SPUR GEARS |
MEASUREMENT |
2020 |
(SCI-Expanded) |
| YILMAZ T. G., DOĞAN O., KARPAT F. |
A COMPARATIVE NUMERICAL STUDY OF FORGED BI-METAL GEARS: BENDING STRENGTH AND DYNAMIC RESPONSE |
MECHANISM AND MACHINE THEORY |
2019 |
(SCI-Expanded) |
| YUCE C., KARPAT F., YAVUZ N. |
INVESTIGATIONS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF LASER WELDED DISSIMILAR GALVANIZED STEEL-ALUMINUM JOINTS |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2019 |
(SCI-Expanded) |
| DOĞAN O., KARPAT F. |
CRACK DETECTION FOR SPUR GEARS WITH ASYMMETRIC TEETH BASED ON THE DYNAMIC TRANSMISSION ERROR |
MECHANISM AND MACHINE THEORY |
2019 |
(SCI-Expanded) |
| KARPAT F., YUCE C., DOĞAN O., GENC M. O., KAYA N. |
DESIGN AND DEVELOPMENT OF TRACTOR CLUTCH USING COMBINED FIELD AND BENCH TESTS |
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING |
2018 |
(SCI-Expanded) |
| DOĞAN O., YILMAZ T. G., KARPAT F. |
STRESS ANALYSIS OF INVOLUTE SPUR GEARS WITH DIFFERENT PARAMETERS BY FINITE ELEMENT AN GRAPHICAL METHOD |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2018 |
(SCI-Expanded) |
| YILMAZ T. G., TUFEKCI M., KARPAT F. |
A STUDY OF LIGHTWEIGHT DOOR HINGES OF COMMERCIAL VEHICLES USING ALUMINUM INSTEAD OF STEEL FOR SUSTAINABLE TRANSPORTATION |
SUSTAINABILITY |
2017 |
(SCI-Expanded) |
| KARPAT F., DOĞAN O., YUCE C., EKWARO-OSIRE S. |
AN IMPROVED NUMERICAL METHOD FOR THE MESH STIFFNESS CALCULATION OF SPUR GEARS WITH ASYMMETRIC TEETH ON DYNAMIC LOAD ANALYSIS |
ADVANCES IN MECHANICAL ENGINEERING |
2017 |
(SCI-Expanded) |
| YUCE C., TUTAR M., KARPAT F., YAVUZ N., TEKIN G. |
THE EFFECT OF PROCESS PARAMETERS ON THE MICROSTRUCTURE AND MECHANICAL PERFORMANCE OF FIBER LASER-WELDED AA5182 ALUMINIUM ALLOYS |
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING |
2017 |
(SCI-Expanded) |
| YUCE C., TUTAR M., KARPAT F., YAVUZ N. |
THE OPTIMIZATION OF PROCESS PARAMETERS AND MICROSTRUCTURAL CHARACTERIZATION OF FIBER LASER WELDED DISSIMILAR HSLA AND MART STEEL JOINTS |
METALS |
2016 |
(SCI-Expanded) |
| DOĞAN O., KARPAT F., YUCE C., KAYA N., YAVUZ N., SEN H. |
A NOVEL DESIGN PROCEDURE FOR TRACTOR CLUTCH FINGERS BY USING OPTIMIZATION AND RESPONSE SURFACE METHODS |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
2016 |
(SCI-Expanded) |
| YUCE C., KARPAT F., YAVUZ N., SENDENIZ G. |
A CASE STUDY: DESIGNING FOR SUSTAINABILITY AND RELIABILITY IN AN AUTOMOTIVE SEAT STRUCTURE |
SUSTAINABILITY |
2014 |
(SCI-Expanded) |
| KARPAT F. |
A VIRTUAL TOOL FOR MINIMUM COST DESIGN OF A WIND TURBINE TOWER WITH RING STIFFENERS |
ENERGIES |
2013 |
(SCI-Expanded) |
| KARPAT F., EKWARO-OSIRE S., ÇAVDAR K., BABALIK F. C. |
DYNAMIC ANALYSIS OF INVOLUTE SPUR GEARS WITH ASYMMETRIC TEETH |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
2008 |
(SCI-Expanded) |
| KARPAT F., EKWARO-OSIRE S., KHANDAKER M. P. H. |
PROBABILISTIC ANALYSIS OF MEMS ASYMMETRIC GEAR TOOTH |
JOURNAL OF MECHANICAL DESIGN |
2008 |
(SCI-Expanded) |
| EKWARO-OSIRE S., KARPAT F. |
EXPERIMENTAL STUDIES ON GALLING ONSET IN OCTG CONNECTIONS: A REVIEW |
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME |
2008 |
(SCI-Expanded) |
| KARPAT F., EKWARO-OSIRE S. |
INFLUENCE OF TIP RELIEF MODIFICATION ON THE WEAR OF SPUR GEARS WITH ASYMMETRIC TEETH |
TRIBOLOGY TRANSACTIONS |
2008 |
(SCI-Expanded) |
| HASHEMI J., CHANDRASHEKAR N., JANG T., KARPAT F., OSETO M., EKWARO-OSIRE S. |
AN ALTERNATIVE MECHANISM OF NON-CONTACT ANTERIOR CRUCIATE LIGAMENT INJURY DURING JUMP-LANDING: IN-VITRO SIMULATION |
EXPERIMENTAL MECHANICS |
2007 |
(SCI-Expanded) |
| CAVDAR K., KARPAT F., BABALIK F. |
COMPUTER AIDED ANALYSIS OF BENDING STRENGTH OF INVOLUTE SPUR GEARS WITH ASYMMETRIC PROFILE |
JOURNAL OF MECHANICAL DESIGN |
2005 |
(SCI-Expanded) |
| FIRATOGLU Z. A., YEMENICI O., UMUR H. |
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE EFFECT OF HORSESHOE VORTEX LEGS ON HEAT CHARACTERISTICS OF THE DOWNSTREAM REGION OF A CIRCULAR CYLINDER-WALL JUNCTION |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER |
2021 |
(SCI-Expanded) |
| UMUR H., YEMENICI O., UMUR Y., SAKIN A. |
FLOW AND HEAT TRANSFER CHARACTERISTICS OVER RECTANGULAR BLOCKED SURFACES |
EXPERIMENTAL HEAT TRANSFER |
2017 |
(SCI-Expanded) |
| YEMENİCİ O., UMUR H. |
EXPERIMENTAL ASPECTS OF HEAT TRANSFER ENHANCEMENT OVER VARIOUS FLOW SURFACES |
HEAT TRANSFER ENGINEERING |
2016 |
(SCI-Expanded) |
| ALTINISIK A., YEMENİCİ O., UMUR H. |
AERODYNAMIC ANALYSIS OF A PASSENGER CAR AT YAW ANGLE AND TWO-VEHICLE PLATOON |
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME |
2015 |
(SCI-Expanded) |
| ALTINISIK A., KUTUKCEKEN E., UMUR H. |
EXPERIMENTAL AND NUMERICAL AERODYNAMIC ANALYSIS OF A PASSENGER CAR: INFLUENCE OF THE BLOCKAGE RATIO ON DRAG COEFFICIENT |
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME |
2015 |
(SCI-Expanded) |
| YEMENICI O., FIRATOGLU Z. A., UMUR H. |
AN EXPERIMENTAL INVESTIGATION OF FLOW AND HEAT TRANSFER CHARACTERISTICS OVER BLOCKED SURFACES IN LAMINAR AND TURBULENT FLOWS |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER |
2012 |
(SCI-Expanded) |
| UMUR H. |
DETERMINATION OF RESISTANCE COEFFICIENT AND TURBULENT FRICTION FACTOR IN NON-CIRCULAR DUCTS |
JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING |
2000 |
(SCI-Expanded) |
| UMUR H. |
FLOW AND HEAT TRANSFER WITH PRESSURE GRADIENTS, REYNOLDS NUMBER AND SURFACE CURVATURE |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2000 |
(SCI-Expanded) |
| UMUR H., KARAGOZ İ. |
AN INVESTIGATION OF EXTERNAL FLOWS WITH VARIOUS PRESSURES AND SURFACES |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
1999 |
(SCI-Expanded) |
| UMUR H., CRANE R., WHITELAW J. |
ACCELERATION AND INJECTION EFFECTS ON LONGITUDINAL VORTICES IN CONCAVE WALL BOUNDARY-LAYERS |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
1995 |
(SCI-Expanded) |
| UMUR H. |
CONCAVE WALL HEAT-TRANSFER CHARACTERISTICS WITH LONGITUDINAL PRESSURE-GRADIENTS AND DISCRETE WALL JETS |
JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING |
1994 |
(SCI-Expanded) |
| NOURI J., UMUR H., WHITELAW J. |
FLOW OF NEWTONIAN AND NON-NEWTONIAN FLUIDS IN CONCENTRIC AND ECCENTRIC ANNULI |
JOURNAL OF FLUID MECHANICS |
1993 |
(SCI-Expanded) |
| SELOVA L., TUNÇEL O., ÇAVUŞOĞLU O., DINDAR Ç., AYDIN H. |
INVESTIGATION OF THE EFFECTS OF WELDING PARAMETERS ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF TRIPLE JOINED FEP05/DP600/FEP05 STEEL SHEETS JOINED BY ELECTRICAL RESISTANCE SPOT WELDING ELEKTRIK DIRENÇ PUNTA KAYNAĞI ILE ÜÇLÜ BIRLEŞTIRILEN FEP05/DP600/FEP05 ÇELIK SACLARDA KAYNAK PARAMETRELERININ MEKANIK ÖZELLIKLERE VE MIKROYAPI ÜZERINDEKI ETKILERIN ARAŞTIRILMASI |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2024 |
(SCI-Expanded) |
| TUNÇEL O., AYDIN H., DAVUT K. |
EFFECT OF HEAT INPUT ON HAZ SOFTENING IN FIBER LASER WELDING OF 22MNB5 STEEL |
OPTICS AND LASER TECHNOLOGY |
2023 |
(SCI-Expanded) |
| KARŞI A., ALTAY M., AYDIN H., BAYRAM A. |
OPTIMIZATION OF LASER CLADDING PROCESS PARAMETERS OF A MARTENSITIC STAINLESS STEEL COATING ON GGG70L DUCTILE CAST IRON |
LASERS IN ENGINEERING |
2023 |
(SCI-Expanded) |
| AYDIN H., ALTAY M., KARŞI A., ERGIN D., ONAYLI A., BAYRAM A. |
EFFECT OF LASER CLADDING PARAMETERS IN LASER DIRECT METAL DEPOSITION (LDMD) OF MARTENSITIC STAINLESS STEEL POWDER ON DUCTILE CAST IRON |
LASERS IN ENGINEERING |
2022 |
(SCI-Expanded) |
| AYDIN H., YILMAZ I. O., BILICI A. Y. |
INVESTIGATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DISSIMILAR ELECTRICAL RESISTANCE SPOT WELDED TBF/DP600 STEEL SHEETS |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2022 |
(SCI-Expanded) |
| YILMAZ I. O., BILICI A. Y., AYDIN H. |
RESISTANCE SPOT WELDABILITY OF TBF STEEL SHEETS WITH DISSIMILAR THICKNESS |
METALLURGICAL RESEARCH & TECHNOLOGY |
2020 |
(SCI-Expanded) |
| AYDIN H., BOSTANCI F. |
IMPROVEMENT OF WEAR RESISTANCE OF SHREDDER BLADES USED IN A REFUSE-DERIVED FUEL (RDF) FACILITY BY PLASMA NITRIDING |
SURFACE REVIEW AND LETTERS |
2020 |
(SCI-Expanded) |
| ÇALIŞKAN M. E., KAYA F., SABIRLI M. U., KARAGÖZ İ. |
DESIGN OF A BIOMIMETIC WING FROM MAPLE SAMARA AND INVESTIGATION OF THE AERODYNAMIC PERFORMANCE |
PHYSICS OF FLUIDS |
2023 |
(SCI-Expanded) |
| AYDIN N., CALISKAN M. E., SABIRLI M. U., KARAGÖZ İ. |
AN EXPERIMENTAL STUDY OF THE AERODYNAMIC PERFORMANCE OF A MAPLE WING MODEL AT LOW REYNOLDS NUMBERS |
MECHANICS RESEARCH COMMUNICATIONS |
2023 |
(SCI-Expanded) |
| CELIK E., KARAGÖZ İ. |
INVESTIGATION OF THE EFFECTS OF INTERMEDIATE RESERVOIRS AND INTERMEDIATE FEEDINGS APPLICATIONS ON THE PERFORMANCE OF PROTON EXCHANGE MEMBRANE FUEL CELLS |
FUEL |
2023 |
(SCI-Expanded) |
| ALTINTAS A. G., CELIK E., KARAGÖZ İ. |
INVESTIGATION OF WATER MOTION IN A FUEL CELL CHANNEL WITH A RESERVOIR |
JOURNAL OF CLEANER PRODUCTION |
2022 |
(SCI-Expanded) |
| CELIK E., KARAGÖZ İ. |
PERFORMANCE ASSESSMENT OF A FOUR-PASS SERPENTINE PROTON EXCHANGE MEMBRANE FUEL CELL WITH NON-HUMIDIFIED CATHODE AND CELL STATE ESTIMATION WITHOUT SPECIAL MEASUREMENT |
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
2022 |
(SCI-Expanded) |
| KUPELI S., CELIK E., KARAGÖZ İ. |
RESPONSE OF A PROTON EXCHANGE MEMBRANE FUEL CELL TO STEP CHANGES IN MASS FLOW RATES |
FUEL CELLS |
2021 |
(SCI-Expanded) |
| AYDIN N., OZALP A., KARAGÖZ İ. |
NUMERICAL INVESTIGATION OF HEAT AND FLOW CHARACTERISTICS IN A LAMINAR FLOW PAST TWO TANDEM CYLINDERS |
THERMAL SCIENCE |
2021 |
(SCI-Expanded) |
| CELIK E., KARAGÖZ İ. |
POLYMER ELECTROLYTE MEMBRANE FUEL CELL FLOW FIELD DESIGNS AND APPROACHES FOR PERFORMANCE ENHANCEMENT |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY |
2020 |
(SCI-Expanded) |
| SAKIN A., KARAGÖZ İ., ERGUL M., DEMIRTAS U., SAVAS F. H. |
AN INVESTIGATION INTO THE USE OF A CYCLONE SEPARATOR IN THE INTAKE AIR SYSTEM AND ITS INFLUENCE ON THE ENGINE PERFORMANCE |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING |
2018 |
(SCI-Expanded) |
| SAKIN A., KARAGÖZ İ. |
NUMERICAL PREDICTION OF SHORT-CUT FLOWS IN GAS-SOLID REVERSE FLOW CYCLONE SEPARATORS |
CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY |
2017 |
(SCI-Expanded) |
| KAYA F., KARAGÖZ İ. |
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF PRESSURE DROP COEFFICIENT AND STATIC PRESSURE DIFFERENCE IN A TANGENTIAL INLET CYCLONE SEPARATOR |
CHEMICAL PAPERS |
2012 |
(SCI-Expanded) |
| KAYA F., KARAGÖZ İ. |
NUMERICAL INVESTIGATION OF PERFORMANCE CHARACTERISTICS OF A CYCLONE PROLONGED WITH A DIPLEG |
CHEMICAL ENGINEERING JOURNAL |
2009 |
(SCI-Expanded) |
| KARAGOZ İ., KAYA F. |
EVALUATIONS OF TURBULENCE MODELS FOR HIGHLY SWIRLING FLOWS IN CYCLONES |
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES |
2009 |
(SCI-Expanded) |
| KAYA F., KARAGOZ İ. |
PERFORMANCE ANALYSIS OF NUMERICAL SCHEMES IN HIGHLY SWIRLING TURBULENT FLOWS IN CYCLONES |
CURRENT SCIENCE |
2008 |
(SCI-Expanded) |
| KARAGOZ İ., KAYA F. |
CFD INVESTIGATION OF THE FLOW AND HEAT TRANSFER CHARACTERISTICS IN A TANGENTIAL INLET CYCLONE |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2007 |
(SCI-Expanded) |
| KARAGOZ İ. |
VARIATION OF MOMENTUM AND THERMAL BOUNDARY LAYERS FOR OSCILLATORY FLOWS IN A CHANNEL |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2001 |
(SCI-Expanded) |
| ARSLAN R., KARAGOZ İ., SURMEN A. |
THEORETICAL AND EXPERIMENTAL INVESTIGATION OF EFFECT OF VALVE TIMING ON VOLUMETRIC EFFICIENCY IN AN IC ENGINE |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2001 |
(SCI-Expanded) |
| KARAGOZ İ. |
EXPERIMENTAL INVESTIGATION OF PERIODIC-FLOW IN BRANCHING PIPES |
FLOW MEASUREMENT AND INSTRUMENTATION |
1993 |
(SCI-Expanded) |
| KANBIR O., TASYAKAN E., CAVDAR K. |
EFFECT OF ATMOSPHERIC PRESSURE PLASMA TREATMENT ON THE ADHESIVE BONDS OF METAL SURFACES |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2023 |
(SCI-Expanded) |
| GÜLER H., AYAS K., ÇAVDAR K. |
INVESTIGATION OF THE EFFECT OF ENVIRONMENT FRIENDLY ATMOSPHERIC PRESSURE COLD PLASMA APPLICATION ON BOND STRENGTH OF POM AND PP MATERIALS ÇEVRE DOSTU ATMOSFERIK BASINÇLI SOĞUK PLAZMA UYGULAMASININ POM VE PP MALZEMELERIN YAPIŞTIRMA BAĞI DAYANIMINA ETKISININ ARAŞTIRILMASI |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2023 |
(SCI-Expanded) |
| CEKIC I., ÇAVDAR K. |
DETECTION OF THE CRACKS IN METAL SHEETS USING CONVOLUTIONAL NEURAL NETWORK (CNN) |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2022 |
(SCI-Expanded) |
| YILMAZ I., ARSLAN E., ÇAVDAR K. |
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF SOUND RADIATION FROM THIN METAL PLATES WITH DIFFERENT THICKNESS VALUES OF FREE LAYER DAMPING LAYERS |
ACOUSTICS AUSTRALIA |
2021 |
(SCI-Expanded) |
| CAVDAR F. Y., YASAR H., CAVDAR K. |
EFFECT OF THE WELDING PARAMETERS ON THE SURFACE MORPHOLOGY OF RESISTANCE SPOT WELDED AISI 304 STAINLESS STEEL JOINTS |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| YILMAZ I., ARSLAN E., KIZILTAS E. C., ÇAVDAR K. |
DEVELOPMENT OF A PREDICTION METHOD OF RAYLEIGH DAMPING COEFFICIENTS FOR FREE LAYER DAMPING COATINGS THROUGH MACHINE LEARNING ALGORITHMS |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
2020 |
(SCI-Expanded) |
| CAVDAR F. Y., BILAL H., GULLU R., GULER B., CİĞEROĞLU E., ÇAVDAR K., ET AL. |
SETUP FOR TESTING THE VIBRATION-BASED LOOSENING OF PRE-LOADED BOLTED JOINTS |
MATERIALS TESTING |
2019 |
(SCI-Expanded) |
| CAVDAR F. Y., BÖRKLÜ H. R., ÇAVDAR K., SEZER H. K. |
THE DESIGN PROCESS OF THE COMPLEX SPECIAL UTILITY VEHICLE USING THE METHODICAL DESIGN APPROACH |
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING |
2019 |
(SCI-Expanded) |
| BINGOL M., ÇAVDAR K. |
NEW INVESTIGATIONS ON HIGHER MECHANICAL PROPERTIES OF WOVEN GLASS FIBER REINFORCED SMC COMPOSITES |
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES |
2018 |
(SCI-Expanded) |
| ÇAVDAR K. |
A CASE STUDY: DESIGN AND MANUFACTURE OF AN ECCENTRIC SPRING FATIGUE TESTING DEVICE |
MATERIALS TESTING |
2018 |
(SCI-Expanded) |
| BÖRKLÜ H. R., YUKSEL N., ÇAVDAR K., SEZER H. K. |
A PRACTICAL APPLICATION FOR MACHINE DESIGN EDUCATION |
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING |
2018 |
(SCI-Expanded) |
| CAVDAR K., KOROGLU M., AKYILDIZ B. |
DESIGN AND IMPLEMENTATION OF A SMART SOLID WASTE COLLECTION SYSTEM |
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY |
2016 |
(SCI-Expanded) |
| ÇAVDAR K., BINGOL M. |
INVESTIGATION OF MECHANICAL PROPERTIES OF BASALT PARTICLE-FILLED SMC COMPOSITES |
INTERNATIONAL JOURNAL OF POLYMER SCIENCE |
2016 |
(SCI-Expanded) |
| CAVDAR K. |
COMPUTER AIDED OPTIMIZATION OF THE HYDROSTATIC RADIAL JOURNAL BEARINGS |
INDUSTRIAL LUBRICATION AND TRIBOLOGY |
2006 |
(SCI-Expanded) |
| CAKIR M. C., CAVDAR K. |
DEVELOPMENT OF A KNOWLEDGE-BASED EXPERT SYSTEM FOR SOLVING METAL CUTTING PROBLEMS |
MATERIALS & DESIGN |
2006 |
(SCI-Expanded) |
| CAKIR M. C., IRFAN O., CAVDAR K. |
AN EXPERT SYSTEM APPROACH FOR DIE AND MOLD MAKING OPERATIONS |
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING |
2005 |
(SCI-Expanded) |
| CAVDAR K., BABALIK F. |
CREATIVITY EFFECT WITH COMPUTER PROGRAM FOR PRODUCT DESIGNERS |
JOURNAL OF ENGINEERING DESIGN |
2004 |
(SCI-Expanded) |
| KILIÇ M., ALTUN A. F. |
COMPREHENSIVE THERMODYNAMIC PERFORMANCE EVALUATION OF VARIOUS GAS LIQUEFACTION CYCLES FOR CRYOGENIC ENERGY STORAGE |
SUSTAINABILITY |
2023 |
(SCI-Expanded) |
| SEVİLGEN G., DURSUN H., KILIÇ M. |
EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ON THE THERMAL PERFORMANCE OF THREE DIFFERENT COLD PLATES DESIGNED FOR THE ELECTRICAL VEHICLE BATTERY MODULE |
SUSTAINABILITY (SWITZERLAND) |
2023 |
(SCI-Expanded) |
| SEVILGEN G., DURSUN H., KILIÇ M. |
EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ON THE THERMAL PERFORMANCE OF THREE DIFFERENT COLD PLATES DESIGNED FOR THE ELECTRICAL VEHICLE BATTERY MODULE |
SUSTAINABILITY |
2023 |
(SCI-Expanded) |
| KILIÇ M., GAMSIZ S., ALINCA Z. N. |
COMPARATIVE EVALUATION AND MULTI-OBJECTIVE OPTIMIZATION OF COLD PLATE DESIGNED FOR THE LITHIUM-ION BATTERY PACK OF AN ELECTRICAL PICKUP BY USING TAGUCHI-GREY RELATIONAL ANALYSIS |
SUSTAINABILITY |
2023 |
(SCI-Expanded) |
| KILIÇ M., ALTUN A. F. |
DYNAMIC MODELLING AND MULTI-OBJECTIVE OPTIMIZATION OF OFF-GRID HYBRID ENERGY SYSTEMS BY USING BATTERY OR HYDROGEN STORAGE FOR DIFFERENT CLIMATES |
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY |
2023 |
(SCI-Expanded) |
| SEVILGEN G., KILIÇ M., BAYRAM H., BAŞAK E., DURSUN H. |
THE INVESTIGATION OF THE INNOVATIVE HYBRID HEAT PUMP SYSTEM DESIGNED AND PROTOTYPED FOR HEATING PROCESS OF ELECTRIC VEHICLES |
AEJ - ALEXANDRIA ENGINEERING JOURNAL |
2023 |
(SCI-Expanded) |
| ÖZDEMIR KÜÇÜK E., KILIÇ M. |
EXERGOECONOMIC ANALYSIS AND MULTI-OBJECTIVE OPTIMIZATION OF ORC CONFIGURATIONS VIA TAGUCHI-GREY RELATIONAL METHODS |
HELIYON |
2023 |
(SCI-Expanded) |
| ÖZDEMIR KÜÇÜK E., KILIÇ M. |
EXERGOECONOMIC AND EXERGETIC SUSTAINABILITY ANALYSIS OF A COMBINED DUAL-PRESSURE ORGANIC RANKINE CYCLE AND VAPOR COMPRESSION REFRIGERATION CYCLE |
SUSTAINABILITY |
2023 |
(SCI-Expanded) |
| KILIC M. |
EVALUATION OF COMBINED THERMAL‒MECHANICAL COMPRESSION SYSTEMS: A REVIEW FOR ENERGY EFFICIENT SUSTAINABLE COOLING |
SUSTAINABILITY |
2022 |
(SCI-Expanded) |
| KILIC M., MUTLU M., ALTUN A. F. |
NUMERICAL SIMULATION AND ANALYTICAL EVALUATION OF THE COLLECTION EFFICIENCY OF THE PARTICLES IN A GAS BY THE WIRE-PLATE ELECTROSTATIC PRECIPITATORS |
APPLIED SCIENCES |
2022 |
(SCI-Expanded) |
| KILIÇ M., GULER T., SEVİLGEN G. |
NOVEL AIR DUCT COOLING PERFORMANCE EVALUATION FOR THE REFRIGERATED PRODUCT TRANSPORT IN A SEMI-TRAILER CABIN |
HEAT TRANSFER RESEARCH |
2022 |
(SCI-Expanded) |
| KILIC M., CAKMAK T. |
A NOVEL DESIGN OF A DRY CLUTCH PRESSURE PLATE FOR WEIGHT REDUCTION WITHOUT COMPROMISING ITS THERMO-MECHANICAL PERFORMANCE |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2022 |
(SCI-Expanded) |
| KILIÇ M., MUTLU M., SALDAMLI I. H. |
NUMERICAL INVESTIGATION OF AN AIR CLEANING DEVICE PERFORMANCE |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2022 |
(SCI-Expanded) |
| KILIÇ M., ANJRINI M. |
COMPARATIVE PERFORMANCE EVALUATION OF THE MECHANICAL AND ADSORPTION HYBRID COOLING SYSTEMS FOR THE CASCADED AND THE SERIAL CONNECTED EVAPORATORS CONFIGURATIONS |
CASE STUDIES IN THERMAL ENGINEERING |
2021 |
(SCI-Expanded) |
| SEVILGEN G., KILIÇ M., AKTAS M. |
DUAL-SEPARATED COOLING CHANNEL PERFORMANCE EVALUATION FOR HIGH-POWER LED PCB IN AUTOMOTIVE HEADLIGHT |
CASE STUDIES IN THERMAL ENGINEERING |
2021 |
(SCI-Expanded) |
| ÖZDEMIR KÜÇÜK E., KILIÇ M. |
COMPARATIVE PERFORMANCE ANALYSIS OF ORC-VCRC COMBINED SYSTEMS BASED ON REFRIGERANT SELECTION |
SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT |
2021 |
(SCI-Expanded) |
| SEVILGEN G., BAYRAM H., KILIC M. |
THE 1-D ANALYSIS OF COOL DOWN SIMULATION OF VEHICLE HVAC SYSTEM |
THERMAL SCIENCE |
2021 |
(SCI-Expanded) |
| KILIÇ M., ANJRINI M. |
COMPARATIVE PERFORMANCE ANALYSIS OF A COMBINED COOLING SYSTEM WITH MECHANICAL AND ADSORPTION CYCLES |
ENERGY CONVERSION AND MANAGEMENT |
2020 |
(SCI-Expanded) |
| SEVILGEN G., SAYARAL G., KILIÇ M., BAYRAM H. |
INVESTIGATION OF THERMAL SENSATION IN A RAILWAY VEHICLE DURING COOLING PERIOD |
TRANSPORTATION RESEARCH RECORD |
2020 |
(SCI-Expanded) |
| ALTUN A. F., KILIÇ M. |
DESIGN AND PERFORMANCE EVALUATION BASED ON ECONOMICS AND ENVIRONMENTAL IMPACT OF A PV-WIND-DIESEL AND BATTERY STANDALONE POWER SYSTEM FOR VARIOUS CLIMATES IN TURKEY |
RENEWABLE ENERGY |
2020 |
(SCI-Expanded) |
| ALTUN A. F., KILIÇ M. |
ECONOMIC FEASIBILITY ANALYSIS WITH THE PARAMETRIC DYNAMIC SIMULATION OF A SINGLE EFFECT SOLAR ABSORPTION COOLING SYSTEM FOR VARIOUS CLIMATIC REGIONS IN TURKEY |
RENEWABLE ENERGY |
2020 |
(SCI-Expanded) |
| ALTUN A. F., KILIÇ M. |
THERMODYNAMIC PERFORMANCE EVALUATION OF A GEOTHERMAL ORC POWER PLANT |
RENEWABLE ENERGY |
2020 |
(SCI-Expanded) |
| KILIÇ M., AKTAS M., SEVILGEN G. |
THERMAL ASSESSMENT OF LAMINAR FLOW LIQUID COOLING BLOCKS FOR LED CIRCUIT BOARDS USED IN AUTOMOTIVE HEADLIGHT ASSEMBLIES |
ENERGIES |
2020 |
(SCI-Expanded) |
| CAKMAK T., KILIÇ M. |
ESTIMATION OF FRICTION SURFACE TEMPERATURE OF A DRY CLUTCH |
INTERNATIONAL JOURNAL OF HEAVY VEHICLE SYSTEMS |
2020 |
(SCI-Expanded) |
| ÜNVER Ü., KELESOGLU A., KILIÇ M. |
A NOVEL METHOD FOR PREDICTION OF GAS TURBINE POWER PRODUCTION DEGREE-DAY METHOD |
THERMAL SCIENCE |
2018 |
(SCI-Expanded) |
| ÜNVER Ü., KILIÇ M. |
INFLUENCE OF ENVIRONMENTAL TEMPERATURE ON EXERGETIC PARAMETERS OF A COMBINED CYCLE POWER PLANT |
INTERNATIONAL JOURNAL OF EXERGY |
2017 |
(SCI-Expanded) |
| MUTLU M., KILIÇ M. |
EFFECTS OF PISTON SPEED, COMPRESSION RATIO, AND CYLINDER GEOMETRY ON SYSTEM PERFORMANCE OF A LIQUID PISTON |
THERMAL SCIENCE |
2016 |
(SCI-Expanded) |
| KILIÇ M., RAVUL H. B. |
ENERGY AND EXERGY ANALYSIS OF A DOUBLE EFFECT LIBR-H2O AND LICL-H2O CHILLERS |
BULGARIAN CHEMICAL COMMUNICATIONS |
2016 |
(SCI-Expanded) |
| MUTLU M., SEVILGEN G., KILIÇ M. |
EVALUATION OF WINDSHIELD DEFOGGING PROCESS IN AN AUTOMOBILE |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2016 |
(SCI-Expanded) |
| KILIÇ M., GONUL E. |
ADSORPTION CHARACTERISTICS EVALUATION OF R134A AND R404A ON DIFFERENT ADSORBENTS |
BULGARIAN CHEMICAL COMMUNICATIONS |
2016 |
(SCI-Expanded) |
| KILIÇ M., MUTLU M. |
A NOVEL DESIGN OF A COMPRESSED AIR STORAGE SYSTEM WITH LIQUID PISTONS |
BULGARIAN CHEMICAL COMMUNICATIONS |
2016 |
(SCI-Expanded) |
| MUTLU M., KILIÇ M. |
THREE-DIMENSIONAL CONJUGATE NUMERICAL ANALYSIS OF FIN AND TUBE HEAT EXCHANGERS WITH VARIOUS FIN THERMAL CONDUCTIVITY VALUES AND GEOMETRIC PARAMETERS |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2016 |
(SCI-Expanded) |
| SEVILGEN G., KILIÇ M. |
INVESTIGATION OF TRANSIENT COOLING OF AN AUTOMOBILE CABIN WITH A VIRTUAL MANIKIN UNDER SOLAR RADIATION |
THERMAL SCIENCE |
2013 |
(SCI-Expanded) |
| KILIÇ M., AKYOL S. M. |
EXPERIMENTAL INVESTIGATION OF THERMAL COMFORT AND AIR QUALITY IN AN AUTOMOBILE CABIN DURING THE COOLING PERIOD |
HEAT AND MASS TRANSFER |
2012 |
(SCI-Expanded) |
| KILIÇ M., SEVILGEN G. |
THE EFFECTS OF USING DIFFERENT TYPE OF INLET VENTS ON THE THERMAL CHARACTERISTICS OF THE AUTOMOBILE CABIN AND THE HUMAN BODY DURING COOLING PERIOD |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2012 |
(SCI-Expanded) |
| SEVİLGEN G., KILIÇ M. |
THREE DIMENSIONAL NUMERICAL ANALYSIS OF TEMPERATURE DISTRIBUTION IN AN AUTOMOBILE CABIN |
THERMAL SCIENCE |
2012 |
(SCI-Expanded) |
| KORUKCU M. Ö., KILIÇ M. |
TRANSIENT EFFECTS OF DIFFERENT HEATING MODES ON TEMPERATURE AND HUMIDITY INSIDE THE AUTOMOBILE CABIN DURING HEATING PERIOD |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2012 |
(SCI-Expanded) |
| ÖZGÜN KORUKÇU M., KILIÇ M. |
TRANSIENT EFFECTS OF HEATER ON CO2 EMISSIONS IN AN AUTOMOBILE |
SCIENTIFIC RESEARCH AND ESSAYS |
2011 |
(SCI-Expanded) |
| KILIÇ M., KAYNAKLI Ö. |
AN EXPERIMENTAL INVESTIGATION ON INTERIOR THERMAL CONDITIONS AND HUMAN BODY TEMPERATURES DURING COOLING PERIOD IN AUTOMOBILE |
HEAT AND MASS TRANSFER |
2011 |
(SCI-Expanded) |
| SEVILGEN G., KILIÇ M. |
NUMERICAL ANALYSIS OF AIR FLOW, HEAT TRANSFER, MOISTURE TRANSPORT AND THERMAL COMFORT IN A ROOM HEATED BY TWO-PANEL RADIATORS |
ENERGY AND BUILDINGS |
2011 |
(SCI-Expanded) |
| YUKSEL N., AVCI A., KILIÇ M. |
THE TEMPERATURE DEPENDENCE OF EFFECTIVE THERMAL CONDUCTIVITY OF THE SAMPLES OF GLASS WOOL REINFORCED WITH ALUMINIUM FOIL |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2010 |
(SCI-Expanded) |
| OEZTUERK F., KILIÇ M. |
UNTITLED |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2010 |
(SCI-Expanded) |
| SEVILGEN G., KILIÇ M. |
TRANSIENT NUMERICAL ANALYSIS OF AIRFLOW AND HEAT TRANSFER IN A VEHICLE CABIN DURING HEATING PERIOD |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2010 |
(SCI-Expanded) |
| AKYOL S. M., KILIÇ M. |
DYNAMIC SIMULATION OF HVAC SYSTEM THERMAL LOADS IN AN AUTOMOBILE COMPARTMENT |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2010 |
(SCI-Expanded) |
| OEZTUERK F., KILIC M. |
EDITORIAL |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2010 |
(SCI-Expanded) |
| KORUKCU M. Ö., KILIÇ M. |
THE USAGE OF IR THERMOGRAPHY FOR THE TEMPERATURE MEASUREMENTS INSIDE AN AUTOMOBILE CABIN |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2009 |
(SCI-Expanded) |
| KILIÇ M., SEVILGEN G. |
EVALUATION OF HEAT TRANSFER CHARACTERISTICS IN AN AUTOMOBILE CABIN WITH A VIRTUAL MANIKIN DURING HEATING PERIOD |
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS |
2009 |
(SCI-Expanded) |
| KILIÇ M., AKYOL S. M. |
THE EFFECTS OF USING DIFFERENT VENTILATION MODES DURING HEATING PERIODS OF AN AUTOMOBILE |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2009 |
(SCI-Expanded) |
| KILIÇ M., SEVILGEN G. |
MODELLING AIRFLOW, HEAT TRANSFER AND MOISTURE TRANSPORT AROUND A STANDING HUMAN BODY BY COMPUTATIONAL FLUID DYNAMICS |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2008 |
(SCI-Expanded) |
| KILIC M., KAYNAKLI Ö. |
SECOND LAW-BASED THERMODYNAMIC ANALYSIS OF WATER-LITHIUM BROMIDE ABSORPTION REFRIGERATION SYSTEM |
ENERGY |
2007 |
(SCI-Expanded) |
| KAYNAKLI Ö., KILIC M. |
THEORETICAL STUDY ON THE EFFECT OF OPERATING CONDITIONS ON PERFORMANCE OF ABSORPTION REFRIGERATION SYSTEM |
ENERGY CONVERSION AND MANAGEMENT |
2007 |
(SCI-Expanded) |
| UNVER U., KILIC M. |
SECOND LAW BASED THERMOECONOMIC ANALYSIS OF COMBINED CYCLE POWER PLANTS CONSIDERING THE EFFECTS OF ENVIRONMENTAL TEMPERATURE AND LOAD VARIATIONS |
INTERNATIONAL JOURNAL OF ENERGY RESEARCH |
2007 |
(SCI-Expanded) |
| KILIC M., KAYNAKLI Ö., YAMANKARADENIZ R. |
DETERMINATION OF REQUIRED CORE TEMPERATURE FOR THERMAL COMFORT WITH STEADY-STATE ENERGY BALANCE METHOD |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2006 |
(SCI-Expanded) |
| KAYNAKLI Ö., KILIC M. |
AN INVESTIGATION OF THERMAL COMFORT INSIDE AN AUTOMOBILE DURING THE HEATING PERIOD |
APPLIED ERGONOMICS |
2005 |
(SCI-Expanded) |
| KAYNAKLI Ö., KILIC M. |
INVESTIGATION OF INDOOR THERMAL COMFORT UNDER TRANSIENT CONDITIONS |
BUILDING AND ENVIRONMENT |
2005 |
(SCI-Expanded) |
| KILIC M. |
DETERMINATION OF HEAT TRANSFER RATE AND NUSSELT NUMBER ON THE THERMAL-ENTRY REGION IN DUCTS |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2004 |
(SCI-Expanded) |
| AKINCITURK N., KILIC M. |
A STUDY ON THE FIRE PROTECTION OF HISTORIC CUMALIKIZIK VILLAGE |
JOURNAL OF CULTURAL HERITAGE |
2004 |
(SCI-Expanded) |
| KAYNAKLI Ö., UNVER U., KILIC M. |
EVALUATING THERMAL ENVIRONMENTS FOR SITTING AND STANDING POSTURE |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2003 |
(SCI-Expanded) |
| KILIC M., OWEN J. |
COMPUTATION OF FLOW BETWEEN TWO DISKS ROTATING AT DIFFERENT SPEEDS |
JOURNAL OF TURBOMACHINERY |
2003 |
(SCI-Expanded) |
| KILIC M. |
COMPUTATION OF FLOW AND HEAT TRANSFER IN ROTATING CAVITIES WITH PERIPHERAL FLOW OF COOLING AIR |
HEAT TRANSFER IN GAS TURBINE SYSTEMS |
2001 |
(SCI-Expanded) |
| KILIÇ M. |
COMPUTATION OF FLOW AND HEAT TRANSFER IN ROTATING CAVITIES WITH PERIPHERAL FLOW OF COOLING AIR |
ANNALS OF THE NEW YORK ACADEMY OF SCIENCES |
2001 |
(SCI-Expanded) |
| KILIC M. |
FLOW AND CONVECTIVE HEAT TRANSFER IN CYLINDRICAL REVERSED FLOW COMBUSTION CHAMBERS |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
1996 |
(SCI-Expanded) |
| KILIC M., GAN X., OWEN J. |
TURBULENT FLOW BETWEEN TWO DISKS CONTRAROTATING AT DIFFERENT SPEEDS |
JOURNAL OF TURBOMACHINERY |
1996 |
(SCI-Expanded) |
| GAN X., KILIC M., OWEN J. |
FLOW BETWEEN CONTRAROTATING DISKS |
JOURNAL OF TURBOMACHINERY |
1995 |
(SCI-Expanded) |
| GAN X., KILIC M., OWEN J. |
SUPERPOSED FLOW BETWEEN TWO DISCS CONTRAROTATING AT DIFFERENTIAL SPEEDS |
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW |
1994 |
(SCI-Expanded) |
| KILIÇ M., GAN X., OWEN J. |
TRANSITIONAL FLOW BETWEEN CONTRA-ROTATING DISKS |
JOURNAL OF FLUID MECHANICS |
1994 |
(SCI-Expanded) |
| BAKIRCI A., KOCA S., ERDOGAN O., ÇAKIR M. C. |
WEAR AND RESIDUAL STRESS IN HIGH-FEED MILLING OF AISI H13 TOOL STEEL |
MATERIALPRUEFUNG/MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| BILBAY F. B., ASLAN E., BARIŞ E., ÇAKIR M. C. |
INVESTIGATION OF THE EFFECT AND OPTIMIZATION OF MATERIAL PROPERTIES ON THE PRINTED CIRCUIT BOARD |
COMPOSITES AND ADVANCED MATERIALS |
2023 |
(SCI-Expanded) |
| ÇILSAL O. O., UĞUZ A., ÇAKIR M. C. |
INNOVATIVE LOW-COST, COLD-WALLED CVD PROCESS DEVELOPMENT AND CNT PRODUCTION BY ETHANOL DECOMPOSITION ON IRON-NANOPARTICLES |
SURFACE ENGINEERING |
2022 |
(SCI-Expanded) |
| BIJANZAD A., ABDULWAHAB M., LAZOGLU I., ENSARİOĞLU C., ÇAKIR M. C. |
EFFECT OF POLYUREA COATING ON THE DUCTILITY OF ALUMINUM FOAM |
MATERIALS TODAY COMMUNICATIONS |
2022 |
(SCI-Expanded) |
| GÜLÇİMEN ÇAKAN B., ENSARİOĞLU C., KUCUKAKARSU V. M., TEKIN I. E., CAKIR M. C. |
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF IN-PLANE AND OUT-OF-PLANE IMPACT BEHAVIOUR OF AUXETIC HONEYCOMB BOXES PRODUCED BY MATERIAL EXTRUSION |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2021 |
(SCI-Expanded) |
| SOZER I. E., GECIM S., KIDIK G., ÇAKIR M. C. |
PROCESS OPTIMISATION OF HMDSO POLYMERISATION IN PVD VACUUM MEDIUM BY NUMERICAL ANALYSIS FOR AUTOMOTIVE INDUSTRY |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2021 |
(SCI-Expanded) |
| MURAT D., ENSARİOĞLU C., GURSAKAL N., ORAL A., CAKIR M. C. |
EVALUATION OF TOOL WEAR FOR HARD TURNING OPERATIONS THROUGH RESPONSE SURFACE METHODOLOGY |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2018 |
(SCI-Expanded) |
| MURAT D., ENSARİOĞLU C., GURSAKAL N., ORAL A., CEMAL M. C. |
SURFACE ROUGHNESS ANALYSIS OF GREATER CUTTING DEPTHS DURING HARD TURNING |
MATERIALS TESTING |
2017 |
(SCI-Expanded) |
| IŞIK Y., KUŞ A., COŞKUN S., OZDEMIR K., CAKIR M. C. |
A NOVEL APPROACH TO USE INTERNALLY COOLED CUTTING TOOLS IN DRY METAL CUTTING |
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES |
2017 |
(SCI-Expanded) |
| ORAL A., CAKIR M. C., GÖNEN D., KARAOĞLAN A. D. |
EXPERIMENTAL INVESTIGATION OF A NOVEL MACHINING STRATEGY FOR ROUGH TURNING USING VARIABLE FEED RATE |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2016 |
(SCI-Expanded) |
| MOTORCU A. R., IŞIK Y., KUŞ A., ÇAKIR M. C. |
ANALYSIS OF THE CUTTING TEMPERATURE AND SURFACE ROUGHNESS DURING THE ORTHOGONAL MACHINING OF AISI 4140 ALLOY STEEL VIA THE TAGUCHI METHOD |
MATERIALI IN TEHNOLOGIJE |
2016 |
(SCI-Expanded) |
| IŞIK Y., KUŞ A., CAKIR M. C. |
INFLUENCE OF CUTTING PARAMETERS ON THE CHIP-TOOL INTERFACE TEMPERATURE DURING THE TURNING OF WASPALOY |
MATERIALS TESTING |
2015 |
(SCI-Expanded) |
| GONEN D., ORAL A., CAKIR M. C. |
INVESTIGATING THE BENEFITS OF USING CIRCULAR DIE SPRINGS INSTEAD OF RECTANGULAR DIE SPRINGS |
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES |
2015 |
(SCI-Expanded) |
| KUŞ A., IŞIK Y., CAKIR M. C., COŞKUN S., OZDEMIR K. |
THERMOCOUPLE AND INFRARED SENSOR-BASED MEASUREMENT OF TEMPERATURE DISTRIBUTION IN METAL CUTTING |
SENSORS |
2015 |
(SCI-Expanded) |
| CAKIR M. C., BAYRAM A., KIRCALI K. K., ENSARIOGLU C. |
EFFECTS OF MICROSTRUCTURE ON MACHINABILITY OF DUCTILE IRON |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE |
2011 |
(SCI-Expanded) |
| CAKIR M. C., ENSARİOĞLU C., DEMIRAYAK I. |
MATHEMATICAL MODELING OF SURFACE ROUGHNESS FOR EVALUATING THE EFFECTS OF CUTTING PARAMETERS AND COATING MATERIAL |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
2009 |
(SCI-Expanded) |
| CAKIR M. C., IŞIK Y. |
INVESTIGATING THE MACHINABILITY OF AUSTEMPERED DUCTILE IRONS HAVING DIFFERENT AUSTEMPERING TEMPERATURES AND TIMES |
MATERIALS & DESIGN |
2008 |
(SCI-Expanded) |
| CAKIR M. C., CILSAL O. O. |
IMPLEMENTATION OF A CONTRADICTION-BASED APPROACH TO DFM |
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING |
2008 |
(SCI-Expanded) |
| CAKIR M. C., BAYRAM A., ISIK Y., SALAR B. |
THE EFFECTS OF AUSTEMPERING TEMPERATURE AND TIME ONTO THE MACHINABILITY OF AUSTEMPERED DUCTILE IRON |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
2005 |
(SCI-Expanded) |
| CAKIR M. C., ISIK Y. |
FINITE ELEMENT ANALYSIS OF CUTTING TOOLS PRIOR TO FRACTURE IN HARD TURNING OPERATIONS |
MATERIALS & DESIGN |
2005 |
(SCI-Expanded) |
| CAKIR M. C., ISIK Y. |
DETECTING TOOL BREAKAGE IN TURNING AISI 1050 STEEL USING COATED AND UNCOATED CUTTING TOOLS |
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY |
2005 |
(SCI-Expanded) |
| ORAL A., CAKIR M. C. |
AUTOMATED CUTTING TOOL SELECTION AND CUTTING TOOL SEQUENCE OPTIMISATION FOR ROTATIONAL PARTS |
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING |
2004 |
(SCI-Expanded) |
| CAKIR M. C., GURARDA A. |
OPTIMIZATION OF MACHINING CONDITIONS FOR MULTI-TOOL MILLING OPERATIONS |
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH |
2000 |
(SCI-Expanded) |
| CAKIR M. C., GURARDA A. |
OPTIMIZATION AND GRAPHICAL REPRESENTATION OF MACHINING CONDITIONS IN MULTI-PASS TURNING OPERATIONS |
COMPUTER INTEGRATED MANUFACTURING SYSTEMS |
1998 |
(SCI-Expanded) |
| BOKE T. A., ALBAK E. İ., KAYA N., BOZKURT R., ERGUL M., OZTURK D., ET AL. |
CORRELATION BETWEEN OBJECTIVE AND SUBJECTIVE TESTS FOR VEHICLE RIDE COMFORT EVALUATIONS |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING |
2023 |
(SCI-Expanded) |
| TOPALOĞLU A., KAYA N., ÖZTÜRK F. |
PREDICTIONS OF THE DESIGN DECISIONS FOR VEHICLE ALLOY WHEEL RIMS USING NEURAL NETWORK |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS |
2022 |
(SCI-Expanded) |
| ÖZTÜRK İ., KAYA N., ÖZTÜRK F. |
EFFECTS OF MATERIAL FAILURE CRITERIA ON DESIGN OF VEHICLE PARTS UNDER IMPACT LOADING |
INTERNATIONAL JOURNAL OF CRASHWORTHINESS |
2022 |
(SCI-Expanded) |
| GENC M. O., KONAKCI S., KAYA N., KARTAL S., SERBEST A. K. |
DEVELOPMENT OF A NOVEL TESTING PROCEDURE AND OPTIMISATION OF A RUBBER SPRING USING CONSTRAINED SIMULATED ANNEALING ALGORITHM FOR AUTOMOBILE CLUTCH SYSTEM |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2022 |
(SCI-Expanded) |
| GENC M. O., KAYA N. |
DESIGN AND VERIFICATION OF ELASTOMER SPRING DAMPING SYSTEM FOR AUTOMOBILE POWERTRAIN SYSTEMS |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2020 |
(SCI-Expanded) |
| ALBAK E. İ., SOLMAZ E., KAYA N., ÖZTÜRK F. |
IMPACT ATTENUATOR CONCEPTUAL DESIGN USING LIGHTWEIGHT MATERIALS AND META-MODELING TECHNIQUE |
MATERIALS TESTING |
2019 |
(SCI-Expanded) |
| OZTURK I., KAYA N., ÖZTÜRK F. |
DESIGN OF VEHICLE PARTS UNDER IMPACT LOADING USING A MULTI-OBJECTIVE DESIGN APPROACH |
MATERIALS TESTING |
2018 |
(SCI-Expanded) |
| PIR F., ALBAK E. İ., ÖZTÜRK F., KAYA N., KORKMAZ I. |
INTEGRATED MODEL-BASED APPROACH FOR THE OPTIMISATION OF VEHICLE RIDE COMFORT AND HANDLING CHARACTERISTICS: INTEGRATED VEHICLE DYNAMICS MODEL DESIGN |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2016 |
(SCI-Expanded) |
| KAYA N., YAVUZ ERKEK M., GUVEN C. |
HYPERELASTIC MODELLING AND SHAPE OPTIMISATION OF VEHICLE RUBBER BUSHINGS |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2016 |
(SCI-Expanded) |
| YILDIZHAN M., EFENDIOGLU B., KAYA N., OZTURK I., ALBAK E. İ., ÖZTÜRK F. |
DESIGN OF IMPROVED ENERGY ABSORBING PADS TO REDUCE OCCUPANT INJURIES IN VEHICLE SIDE IMPACT |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2016 |
(SCI-Expanded) |
| ÖZTÜRK F., KAYA N., SOLMAZ E. |
SPECIAL ISSUE ON RECENT ADVANCES IN DESIGN, TEST AND SIMULATION TECHNIQUES IN AUTOMOTIVE ENGINEERING AND MOBILITY RESEARCH |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2016 |
(SCI-Expanded) |
| ESIYOK F., SEVILGEN G., ÖZTÜRK F., KAYA N., KAREN I. |
HOT STAMPING APPLICATIONS IN THE AUTOMOTIVE INDUSTRY: COUPLED NUMERICAL SIMULATION AND FE-BASED DIE DESIGN |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2016 |
(SCI-Expanded) |
| KAREN I., KAYA N., OZTURK F. |
INTELLIGENT DIE DESIGN OPTIMIZATION USING ENHANCED DIFFERENTIAL EVOLUTION AND RESPONSE SURFACE METHODOLOGY |
JOURNAL OF INTELLIGENT MANUFACTURING |
2015 |
(SCI-Expanded) |
| KAYA N. |
SHAPE OPTIMIZATION OF RUBBER BUSHING USING DIFFERENTIAL EVOLUTION ALGORITHM |
SCIENTIFIC WORLD JOURNAL |
2014 |
(SCI-Expanded) |
| ONAL A. S., KAYA N. |
EFFECT AND OPTIMIZATION OF RESISTANCE SPOT WELDING PARAMETERS ON THE STRENGTH OF WELDED HOT-STAMPED PARTS |
MATERIALS TESTING |
2014 |
(SCI-Expanded) |
| KAREN I., KAYA N., OZTURK F., KORKMAZ I., YILDIZHAN M., YURTTAS A. |
A DESIGN TOOL TO EVALUATE THE VEHICLE RIDE COMFORT CHARACTERISTICS: MODELING, PHYSICAL TESTING, AND ANALYSIS |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2012 |
(SCI-Expanded) |
| KAREN I., KAYA N., ÖZTÜRK F. |
SHAPE- AND TOPOLOGY-BASED STRUCTURAL DIE DESIGN USING DIFFERENTIAL EVOLUTION AND RESPONSE SURFACE METHODOLOGY FOR SHEET METAL FORMING |
MATERIALS TESTING |
2012 |
(SCI-Expanded) |
| KAYA N., KAREN I., ÖZTÜRK F. |
RE-DESIGN OF A FAILED CLUTCH FORK USING TOPOLOGY AND SHAPE OPTIMISATION BY THE RESPONSE SURFACE METHOD |
MATERIALS & DESIGN |
2010 |
(SCI-Expanded) |
| KAREN I., KAYA N., ÖZTÜRK F., KORKMAZ I. |
OPTIMISATION OF VEHICLE ENGINE MOUNT SYSTEM USING SIMULATION-BASED DESIGN APPROACH |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2010 |
(SCI-Expanded) |
| KAYA N., ÖZTÜRK F. |
MULTI-OBJECTIVE CRASHWORTHINESS DESIGN OPTIMISATION OF THIN-WALLED TUBES |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2010 |
(SCI-Expanded) |
| KARAMANGIL M. İ., KAYA N. |
A COMPARISON OF FATIGUE LIFE BETWEEN TWO AUTOMOTIVE CONNECTING RODS |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2007 |
(SCI-Expanded) |
| KAYA N. |
MACHINING FIXTURE LOCATING AND CLAMPING POSITION OPTIMIZATION USING GENETIC ALGORITHMS |
COMPUTERS IN INDUSTRY |
2006 |
(SCI-Expanded) |
| KAYA N. |
OPTIMAL DESIGN OF AN AUTOMOTIVE DIAPHRAGM SPRING WITH HIGH FATIGUE RESISTANCE |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2006 |
(SCI-Expanded) |
| KAYA N., OZTURK F. |
THE APPLICATION OF CHIP REMOVAL AND FRICTIONAL CONTACT ANALYSIS FOR WORKPIECE-FIXTURE LAYOUT VERIFICATION |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
2003 |
(SCI-Expanded) |
| KAYA N., OZTURK F. |
ALGORITHMS FOR GROUPING MACHINING OPERATIONS AND PLANNING WORKPIECE LOCATION UNDER DYNAMIC MACHINING CONDITIONS |
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH |
2001 |
(SCI-Expanded) |
| OZTURK F., KAYA N., ALANKUS O., SEVINC S. |
MACHINING FEATURES AND ALGORITHMS FOR SET-UP PLANNING AND FIXTURE DESIGN |
COMPUTER INTEGRATED MANUFACTURING SYSTEMS |
1996 |
(SCI-Expanded) |
| YAMANKARADENİZ N. |
EXERGY AND EXERGOECONOMIC ANALYSES OF AN ORC-ASSISTED VAPOUR COMPRESSION REFRIGERATION CYCLE |
INTERNATIONAL JOURNAL OF EXERGY |
2022 |
(SCI-Expanded) |
| KAYNAKLI F., YAMANKARADENİZ N. |
EXAMINATION OF ECONOMICALLY AND PRACTICALLY HOMOGENEOUS AIR AND TEMPERATURE DISTRIBUTION IN COLD STORES BY CFD ANALYSIS |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2022 |
(SCI-Expanded) |
| YAMANKARADENİZ N. |
PERFORMANCE ANALYSIS OF A SOLAR-ASSISTED DUAL-TANK HEAT PUMP SYSTEM FOR CLIMATIC CONDITIONS IN TURKEY |
THERMAL SCIENCE |
2022 |
(SCI-Expanded) |
| BADEMLIOGLU A. H., CANBOLAT A. S., YAMANKARADENİZ N., KAYNAKLI Ö. |
A PARAMETRIC ANALYSIS OF THE PERFORMANCE OF ORGANIC RANKINE CYCLE WITH HEAT RECOVERY EXCHANGER AND ITS STATISTICAL EVALUATION |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2019 |
(SCI-Expanded) |
| YAMANKARADENİZ N., BADEMLIOGLU A. H., KAYNAKLI Ö. |
PERFORMANCE ASSESSMENTS OF ORGANIC RANKINE CYCLE WITH INTERNAL HEAT EXCHANGER BASED ON EXERGETIC APPROACH |
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME |
2018 |
(SCI-Expanded) |
| BADEMLIOGLU A. H., KAYNAKLI Ö., YAMANKARADENİZ N. |
THE EFFECT OF WATER VAPOR DIFFUSION RESISTANCE FACTOR OF INSULATION MATERIALS FOR OUTER WALLS ON CONDENSATION |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2018 |
(SCI-Expanded) |
| UFAT H., KAYNAKLI Ö., YAMANKARADENİZ N., YAMANKARADENİZ R. |
THREE-DIMENSIONAL AIR DISTRIBUTION ANALYSIS OF DIFFERENT OUTFLOW TYPED OPERATING ROOMS AT DIFFERENT INLET VELOCITIES AND ROOM TEMPERATURES |
ADVANCES IN MECHANICAL ENGINEERING |
2017 |
(SCI-Expanded) |
| SÖKMEN K. F., YURUKLU E., YAMANKARADENİZ N. |
COMPUTATIONAL THERMAL ANALYSIS OF CYLINDRICAL FIN DESIGN PARAMETERS AND A NEW METHODOLOGY FOR DEFINING FIN STRUCTURE IN LED AUTOMOBILE HEADLAMP COOLING APPLICATIONS |
APPLIED THERMAL ENGINEERING |
2016 |
(SCI-Expanded) |
| YAMANKARADENİZ N., SOKMEN K. F., COŞKUN S., KAYNAKLI Ö., PASTAKKAYA B. |
PERFORMANCE ANALYSIS OF A RE-CIRCULATING HEAT PUMP DRYER |
THERMAL SCIENCE |
2016 |
(SCI-Expanded) |
| TUĞCU A., ARSLAN O., KÖSE R., YAMANKARADENİZ N. |
THERMODYNAMICS AND ECONOMICAL ANALYSIS OF GEOTHERMAL ASSISTED ABSORPTION REFRIGERATION SYSTEM: SIMAV CASE STUDY |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2016 |
(SCI-Expanded) |
| YAMANKARADENIZ N. |
THERMODYNAMIC PERFORMANCE ASSESSMENTS OF A DISTRICT HEATING SYSTEM WITH GEOTHERMAL BY USING ADVANCED EXERGY ANALYSIS |
RENEWABLE ENERGY |
2016 |
(SCI-Expanded) |
| YAMANKARADENIZ N. |
MINIMIZATION OF THERMAL INSULATION THICKNESS TAKING INTO ACCOUNT CONDENSATION ON EXTERNAL WALLS |
ADVANCES IN MECHANICAL ENGINEERING |
2015 |
(SCI-Expanded) |
| ALKAN M. A., KEÇEBAŞ A., YAMANKARADENİZ N. |
EXERGOECONOMIC ANALYSIS OF A DISTRICT HEATING SYSTEM FOR GEOTHERMAL ENERGY USING SPECIFIC EXERGY COST METHOD |
ENERGY |
2013 |
(SCI-Expanded) |
| PASTAKKAYA B., YAMANKARADENİZ N., KAYNAKLI Ö., COŞKUN S., YAMANAKARADENIZ R. |
EXPERIMENTAL ANALYSIS OF A SOLAR ABSORPTION SYSTEM WITH INTERIOR ENERGY STORAGE |
JOURNAL OF ENERGY IN SOUTHERN AFRICA |
2012 |
(SCI-Expanded) |
| ARSLANOĞLU N. |
MODELING OF DIFFUSE SOLAR RADIATION EXERGY IN TURKEY: COMPARISON OF DIFFUSE FRACTION AND DIFFUSION COEFFICIENT MODELS |
ENVIRONMENTAL PROGRESS AND SUSTAINABLE ENERGY |
2023 |
(SCI-Expanded) |
| DUNDAR A., ARSLANOĞLU N. |
MULTI-OBJECTIVE OPTIMIZATION OF PARAMETERS AFFECTING THE PERFORMANCE OF PARABOLIC SOLAR COLLECTORS BY TAGUCHI, ANOVA, AND GREY RELATIONAL ANALYSIS METHOD |
HEAT TRANSFER RESEARCH |
2023 |
(SCI-Expanded) |
| ARSLANOĞLU N. |
DEVELOPMENT OF EMPIRICAL MODELS FOR ESTIMATION DIFFUSE SOLAR RADIATION EXERGY IN TURKEY |
INTERNATIONAL JOURNAL OF EXERGY |
2022 |
(SCI-Expanded) |
| CANBOLAT A. S., BADEMLIOGLU A. H., ARSLANOGLU N., KAYNAKLI Ö. |
PERFORMANCE OPTIMIZATION OF ABSORPTION REFRIGERATION SYSTEMS USING TAGUCHI, ANOVA AND GREY RELATIONAL ANALYSIS METHODS |
JOURNAL OF CLEANER PRODUCTION |
2019 |
(SCI-Expanded) |
| ARSLANOĞLU N. |
EMPIRICAL MODELING OF SOLAR RADIATION EXERGY FOR TURKEY |
APPLIED THERMAL ENGINEERING |
2016 |
(SCI-Expanded) |
| ARSLANOĞLU N. |
EVALUATION AND ESTABLISHMENT OF DIFFUSE SOLAR RADIATION MODELS FOR BURSA, TURKEY |
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS |
2016 |
(SCI-Expanded) |
| TURKOZ N., ERKUŞ B., KARAMANGİL M. İ., SÜRMEN A., ARSLANOĞLU N. |
EXPERIMENTAL INVESTIGATION OF THE EFFECT OF E85 ON ENGINE PERFORMANCE AND EMISSIONS UNDER VARIOUS IGNITION TIMINGS |
FUEL |
2014 |
(SCI-Expanded) |
| CANBOLAT A. S., BADEMLIOGLU A. H., SAKA K., KAYNAKLI Ö. |
INVESTIGATION OF PARAMETERS AFFECTING THE OPTIMUM THERMAL INSULATION THICKNESS FOR BUILDINGS IN HOT AND COLD CLIMATES |
THERMAL SCIENCE |
2020 |
(SCI-Expanded) |
| BADEMLIOGLU A. H., CANBOLAT A. S., KAYNAKLI Ö. |
MULTI-OBJECTIVE OPTIMIZATION OF PARAMETERS AFFECTING ORGANIC RANKINE CYCLE PERFORMANCE CHARACTERISTICS WITH TAGUCHI-GREY RELATIONAL ANALYSIS |
RENEWABLE & SUSTAINABLE ENERGY REVIEWS |
2020 |
(SCI-Expanded) |
| CANBOLAT A. S., BADEMLIOGLU A. H., KAYNAKLI Ö. |
A MODELING OF ELECTRICITY GENERATION BY USING GEOTHERMAL ASSISTED ORGANIC RANKINE CYCLE WITH INTERNAL HEAT RECOVERY |
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS |
2019 |
(SCI-Expanded) |
| YILMAZ I. H., SAKA K., KAYNAKLI Ö., KAŞKA Ö. |
PERFORMANCE ASSESSMENT AND SOLUTION PROCEDURE FOR SERIES FLOW DOUBLE-EFFECT ABSORPTION REFRIGERATION SYSTEMS UNDER CRITICAL OPERATING CONSTRAINTS |
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING |
2019 |
(SCI-Expanded) |
| BADEMLIOGLU A. H., CANBOLAT A. S., YAMANKARADENIZ N., KAYNAKLI Ö. |
INVESTIGATION OF PARAMETERS AFFECTING ORGANIC RANKINE CYCLE EFFICIENCY BY USING TAGUCHI AND ANOVA METHODS |
APPLIED THERMAL ENGINEERING |
2018 |
(SCI-Expanded) |
| KAYNAKLI Ö., BADEMLIOGLU A. H., UFAT H. |
DETERMINATION OF OPTIMUM INSULATION THICKNESS FOR DIFFERENT INSULATION APPLICATIONS CONSIDERING CONDENSATION |
TEHNICKI VJESNIK-TECHNICAL GAZETTE |
2018 |
(SCI-Expanded) |
| UFAT H., KAYNAKLI Ö., YAMANKARADENIZ N., YAMANKARADENIZ R. |
INVESTIGATION OF THE NUMBER OF PARTICLES IN AN OPERATING ROOM AT DIFFERENT AMBIENT TEMPERATURES AND INLET VELOCITIES |
INTERNATIONAL JOURNAL OF VENTILATION |
2018 |
(SCI-Expanded) |
| YILMAZ I. H., SAKA K., KAYNAKLI Ö. |
A THERMODYNAMIC EVALUATION ON HIGH PRESSURE CONDENSER OF DOUBLE EFFECT ABSORPTION REFRIGERATION SYSTEM |
ENERGY |
2016 |
(SCI-Expanded) |
| KAYNAKLI Ö., SAKA K., KAYNAKLI F. |
ENERGY AND EXERGY ANALYSIS OF A DOUBLE EFFECT ABSORPTION REFRIGERATION SYSTEM BASED ON DIFFERENT HEAT SOURCES |
ENERGY CONVERSION AND MANAGEMENT |
2015 |
(SCI-Expanded) |
| KAYNAKLI Ö. |
ECONOMIC THERMAL INSULATION THICKNESS FOR PIPES AND DUCTS: A REVIEW STUDY |
RENEWABLE & SUSTAINABLE ENERGY REVIEWS |
2014 |
(SCI-Expanded) |
| KARAMANGİL M. İ., YENICE S., KAYNAKLI Ö., SÜRMEN A. |
MATHEMATICAL MODELING OF HC EMISSIONS RELEASED BY OIL FILM FOR GASOLINE AND GASEOUS FUELS |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2014 |
(SCI-Expanded) |
| KAYNAKLI Ö. |
OPTIMUM THERMAL INSULATION THICKNESSES AND PAYBACK PERIODS FOR BUILDING WALLS IN TURKEY |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2013 |
(SCI-Expanded) |
| KAYNAKLI Ö. |
DETERMINATION OF HEATING-COOLING PERIODS AND ANNUAL ENERGY REQUIREMENTS VARIATIONS WITH RESPECT TO YEARS |
ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART A-ENERGY SCIENCE AND RESEARCH |
2012 |
(SCI-Expanded) |
| KAYNAKLI Ö., OZDEMIR S., KARAMANGİL M. İ. |
DETERMINATION OF OPTIMUM THERMAL INSULATION THICKNESS CONSIDERING SOLAR RADIATION AND WALL ORIENTATION |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2012 |
(SCI-Expanded) |
| KAYNAKLI Ö. |
A REVIEW OF THE ECONOMICAL AND OPTIMUM THERMAL INSULATION THICKNESS FOR BUILDING APPLICATIONS |
RENEWABLE & SUSTAINABLE ENERGY REVIEWS |
2012 |
(SCI-Expanded) |
| KARAMANGİL M. İ., ERKUŞ B., KAYNAKLI Ö., SÜRMEN A. |
TECHNICAL AND ECONOMIC ANALYSIS OF THE PROBLEMS OBSERVED IN DIESEL ENGINES WITH COMMON RAIL INJECTION SYSTEMS IN TURKEY |
ENERGY EDUCATION SCIENCE AND TECHNOLOGY PART A-ENERGY SCIENCE AND RESEARCH |
2012 |
(SCI-Expanded) |
| KAYNAKLI Ö. |
PARAMETRIC INVESTIGATION OF OPTIMUM THERMAL INSULATION THICKNESS FOR EXTERNAL WALLS |
ENERGIES |
2011 |
(SCI-Expanded) |
| KARAMANGİL M. İ., COSKUN S., KAYNAKLI Ö., YAMANKARADENIZ N. |
A SIMULATION STUDY OF PERFORMANCE EVALUATION OF SINGLE-STAGE ABSORPTION REFRIGERATION SYSTEM USING CONVENTIONAL WORKING FLUIDS AND ALTERNATIVES |
RENEWABLE & SUSTAINABLE ENERGY REVIEWS |
2010 |
(SCI-Expanded) |
| KAYNAKLI Ö. |
EXERGY ANALYSIS OF ABSORBER USING WATER/LITHIUM BROMIDE SOLUTION |
HEAT AND MASS TRANSFER |
2008 |
(SCI-Expanded) |
| KAYNAKLI Ö. |
A STUDY ON RESIDENTIAL HEATING ENERGY REQUIREMENT AND OPTIMUM INSULATION THICKNESS |
RENEWABLE ENERGY |
2008 |
(SCI-Expanded) |
| KAYNAKLI Ö. |
THE FIRST AND SECOND LAW ANALYSIS OF A LITHIUM BROMIDE/WATER COIL ABSORBER |
ENERGY |
2008 |
(SCI-Expanded) |
| ATMACA I., KAYNAKLI Ö., YIGIT A. |
EFFECTS OF RADIANT TEMPERATURE ON THERMAL COMFORT |
BUILDING AND ENVIRONMENT |
2007 |
(SCI-Expanded) |
| KAYNAKLI Ö., YAMANKARADENIZ R. |
THERMODYNAMIC ANALYSIS OF ABSORPTION REFRIGERATION SYSTEM BASED ON ENTROPY GENERATION |
CURRENT SCIENCE |
2007 |
(SCI-Expanded) |
| KARAMANGIL M. İ., KAYNAKLI Ö., SURMEN A. |
PARAMETRIC INVESTIGATION OF CYLINDER AND JACKET SIDE CONVECTIVE HEAT TRANSFER COEFFICIENTS OF GASOLINE ENGINES |
ENERGY CONVERSION AND MANAGEMENT |
2006 |
(SCI-Expanded) |
| KAYNAKLI Ö., HORUZ I. |
COMPARISON OF PARALLEL AND COUNTER FLOW COIL ABSORBER PERFORMANCE |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2006 |
(SCI-Expanded) |
| KAYNAKLI Ö., HORUZ I. |
EVALUATION OF COIL ABSORBER PERFORMANCE |
HEAT AND MASS TRANSFER |
2004 |
(SCI-Expanded) |
| KAYNAKLI Ö., HORUZ I. |
AN EXPERIMENTAL ANALYSIS OF AUTOMOTIVE AIR CONDITIONING SYSTEM |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
2003 |
(SCI-Expanded) |
| IŞIK Y., GÖLE M. |
OPTIMUM STRUCTURAL DESIGN OF SEAT FRAMES FOR COMMERCIAL VEHICLES |
MATERIALPRUEFUNG/MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| IŞIK Y. |
USING INTERNALLY COOLED CUTTING TOOLS IN THE MACHINING OF DIFFICULT-TO-CUT MATERIALS BASED ON WASPALOY |
ADVANCES IN MECHANICAL ENGINEERING |
2016 |
(SCI-Expanded) |
| ISIK Y. |
AN EXPERIMENTAL INVESTIGATION ON EFFECT OF CUTTING FLUIDS IN TURNING WITH COATED CARBIDES TOOL |
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING |
2010 |
(SCI-Expanded) |
| ISIK Y. |
TOOL LIFE AND PERFORMANCE COMPARISON OF COATED TOOLS IN METAL CUTTING |
INTERNATIONAL JOURNAL OF MATERIALS AND PRODUCT TECHNOLOGY |
2010 |
(SCI-Expanded) |
| ISIK Y. |
INVESTIGATING THE MACHINABILITY OF TOOL STEELS IN TURNING OPERATIONS |
MATERIALS AND DESIGN |
2007 |
(SCI-Expanded) |
| PALA Y., KAHYA Ç. |
A METHOD BASED ON RICCATI EQUATION FOR THE VIBRATION ANALYSIS OF RODS WITH VARIABLE CROSS-SECTIONS |
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS |
2022 |
(SCI-Expanded) |
| PALA Y., BEYÇİMEN S., KAHYA Ç. |
DAMPED VIBRATION ANALYSIS OF CRACKED TIMOSHENKO BEAMS WITH RESTRAINED END CONDITIONS |
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
2020 |
(SCI-Expanded) |
| PALA Y., PALA A. |
TORSION OF CIRCULAR OPEN CROSS-SECTION WITH CORRUGATED INNER AND OUTER SURFACE |
STRUCTURAL ENGINEERING AND MECHANICS |
2020 |
(SCI-Expanded) |
| PALA Y., REİS M. |
DYNAMIC RESPONSE OF A CRACKED BEAM UNDER A MOVING MASS LOAD |
JOURNAL OF ENGINEERING MECHANICS |
2013 |
(SCI-Expanded) |
| REİS M., PALA Y. |
VIBRATION OF A CRACKED CANTILEVER BEAM UNDER MOVING MASS LOAD |
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT |
2012 |
(SCI-Expanded) |
| REİS M., PALA Y. |
DYNAMIC RESPONSE OF A BEAM SUPPORTED WITH DAMPER UNDER MOVING LOAD |
STRUCTURAL ENGINEERING AND MECHANICS |
2009 |
(SCI-Expanded) |
| REİS M., PALA Y. |
DYNAMIC RESPONSE OF A SLIGHTLY CURVED BRIDGES UNDER MOVING MASS LOADS |
BALTIC JOURNAL OF ROAD AND BRIDGE ENGINEERING |
2009 |
(SCI-Expanded) |
| REİS M., PALA Y., KARADERE G. |
DYNAMIC ANALYSIS OF A BRIDGE SUPPORTED WITH MANY VERTICAL SUPPORTS UNDER MOVING LOAD |
BALTIC JOURNAL OF ROAD AND BRIDGE ENGINEERING |
2008 |
(SCI-Expanded) |
| BINGÜL Ö., YILDIZ A. |
FUZZY LOGIC AND PROPORTIONAL INTEGRAL DERIVATIVE BASED MULTI-OBJECTIVE OPTIMIZATION OF ACTIVE SUSPENSION SYSTEM OF A 4×4 IN-WHEEL MOTOR DRIVEN ELECTRICAL VEHICLE |
JVC/JOURNAL OF VIBRATION AND CONTROL |
2023 |
(SCI-Expanded) |
| KAVALA SEN D., YILDIZ A., KOPMAZ O. |
OPTIMAL DESIGN OF A FIVE-BAR PLANAR MANIPULATOR AND ITS CONTROLLER BY USING DIFFERENT ALGORITHMS FOR MINIMUM SHAKING FORCES AND MOMENTS FOR THE LARGEST TRAJECTORY IN A USABLE WORKSPACE |
MACHINES |
2022 |
(SCI-Expanded) |
| YILDIZ A., YILMAZ O., KARABULUT H. |
STRUCTURAL DESIGN OPTIMIZATION OF THE ARC SPRING AND DUAL-MASS FLYWHEEL INTEGRATED WITH DIFFERENT OPTIMIZATION METHODS |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| YILDIZ A., ÖZEL M. A. |
A COMPARATIVE STUDY OF ENERGY CONSUMPTION AND RECOVERY OF AUTONOMOUS FUEL‐CELL HYDROGEN–ELECTRIC VEHICLES USING DIFFERENT POWERTRAINS BASED ON REGENERATIVE BRAKING AND ELECTRONIC STABILITY CONTROL SYSTEM |
APPLIED SCIENCES (SWITZERLAND) |
2021 |
(SCI-Expanded) |
| YILDIZ A., ULUDA B. |
PARAMETRIC SYNTHESIS OF TWO DIFFERENT TRUNK LID MECHANISMS FOR SEDAN VEHICLES USING POPULATION-BASED OPTIMISATION ALGORITHMS |
MECHANISM AND MACHINE THEORY |
2021 |
(SCI-Expanded) |
| FIDANCIOGULLARI S., YILDIZ A. |
CHARACTERIZATION OF THE TORSIONAL VIBRATION BEHAVIOR OF CIRCULAR AND RECTANGULAR CROSS-SECTIONAL ARC SPRINGS: THEORY AND EXPERIMENTS |
MATERIALS TESTING |
2021 |
(SCI-Expanded) |
| YILDIZ A. |
A COMPARATIVE STUDY ON THE OPTIMAL NON-LINEAR SEAT AND SUSPENSION DESIGN FOR AN ELECTRIC VEHICLE USING DIFFERENT POPULATION-BASED OPTIMISATION ALGORITHMS |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2019 |
(SCI-Expanded) |
| YILDIZ A., BOTTIGLIONE F., PICCININNI A., KOPMAZ O., CARBONE G. |
EXPERIMENTAL VALIDATION OF THE CARBONE-MANGIALARDI-MANTRIOTA MODEL OF CONTINUOUSLY VARIABLE TRANSMISSIONS |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING |
2018 |
(SCI-Expanded) |
| YILDIZ A., KOPMAZ O. |
CONTROL-ORIENTED MODELLING WITH EXPERIMENTAL VERIFICATION AND DESIGN OF THE APPROPRIATE GAINS OF A PI SPEED RATIO CONTROLLER OF CHAIN CVTS |
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING |
2017 |
(SCI-Expanded) |
| YILDIZ A., PICCININNI A., BOTTIGLIONE F., CARBONE G. |
MODELING CHAIN CONTINUOUSLY VARIABLE TRANSMISSION FOR DIRECT IMPLEMENTATION IN TRANSMISSION CONTROL |
MECHANISM AND MACHINE THEORY |
2016 |
(SCI-Expanded) |
| YILDIZ A., KOPMAZ O., TELLİ ÇETİN S. |
DYNAMIC MODELING AND ANALYSIS OF A FOUR-BAR MECHANISM COUPLED WITH A CVT FOR OBTAINING VARIABLE INPUT SPEEDS |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
2015 |
(SCI-Expanded) |
| YILDIZ A., KOPMAZ O. |
DYNAMIC ANALYSIS OF A MECHANICAL PRESS EQUIPPED WITH A HALF-TOROIDAL CONTINUOUSLY VARIABLE TRANSMISSION |
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY |
2015 |
(SCI-Expanded) |
| KOCYIGIT F., KAYA A. M. |
THERMAL AND MECHANICAL PROPERTIES OF A NEW INSULATION COMPOSITE MATERIAL |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| KÜÇÜKDEMİRCİ KAYA P., KAYA A. M., GIRGIN N. K., KAHVECI F. Ş., AKALIN E. H., İŞÇİMEN R. |
SEPSIS EPISODES CAUSED BY PRESSURE INJURIES IN CRITICAL ILLNESS: A RETROSPECTIVE OBSERVATIONAL COHORT STUDY |
WOUND MANAGEMENT AND PREVENTION |
2023 |
(SCI-Expanded) |
| USTAOĞLU A., KURŞUNCU B., KAYA A. M., ÇALIŞKAN H. |
ANALYSIS OF VAPOR COMPRESSION REFRIGERATION CYCLE USING ADVANCED EXERGETIC APPROACH WITH TAGUCHI AND ANOVA OPTIMIZATION AND REFRIGERANT SELECTION WITH ENVIROECONOMIC CONCERNS BY TOPSIS ANALYSIS |
SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS |
2022 |
(SCI-Expanded) |
| KAYA A. M. |
EXAMINATION OF THE PERFORMANCE EFFECTS OF REFRIGERANTS IN A MULTISTAGE REFRIGERATION CYCLE USING ADVANCED EXERGY ANALYSIS |
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY |
2022 |
(SCI-Expanded) |
| KAYA A. M., ÖZDEMİR Y. H., YİĞİT K. S. |
INVESTIGATION OF A CROSS-FLOW TURBINE UNDER NATURAL CONDITIONS |
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES |
2022 |
(SCI-Expanded) |
| KAYA A. M. |
THERMODYNAMICAL STUDY AND TAGUCHI OPTIMIZATION OF A TWO-STAGE VAPOR COMPRESSION REFRIGERATION SYSTEM |
THERMAL SCIENCE |
2022 |
(SCI-Expanded) |
| SEN U., OZDEMIR M., ERKARTAL M., KAYA A. M., MANDA A. A., OVEISI A. R., ET AL. |
MESOSCALE MORPHOLOGIES OF NAFION-BASED BLEND MEMBRANES BY DISSIPATIVE PARTICLE DYNAMICS |
PROCESSES |
2021 |
(SCI-Expanded) |
| KAYA A. M., KANDEMIR I., AKSIT M. F., YİĞİT K. S. |
INVESTIGATION OF OPTIMUM WORKING CONDITIONS OF A MICRO CROSS FLOW TURBINE |
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY |
2015 |
(SCI-Expanded) |
| KANDEMIR I., KAYA A. M. |
MOLECULAR DYNAMICS SIMULATION OF COMPRESSIBLE HOT/COLD MOVING LID-DRIVEN MICROCAVITY FLOW |
MICROFLUIDICS AND NANOFLUIDICS |
2012 |
(SCI-Expanded) |
| ALTUN A. F. |
A CONCEPTUAL DESIGN AND ANALYSIS OF A NOVEL TRIGENERATION SYSTEM CONSISTING OF A GAS TURBINE POWER CYCLE WITH INTERCOOLING, AMMONIA-WATER ABSORPTION REFRIGERATION, AND HOT WATER PRODUCTION |
SUSTAINABILITY |
2022 |
(SCI-Expanded) |
| ALTUN A. F. |
DETERMINATION OF OPTIMUM BUILDING ENVELOPE PARAMETERS OF A ROOM CONCERNING WINDOW-TO-WALL RATIO, ORIENTATION, INSULATION THICKNESS AND WINDOW TYPE |
BUILDINGS |
2022 |
(SCI-Expanded) |
| TÜFEKCİ K., ÇAKAN B., KÜÇÜKAKARSU V. M. |
STRESS RELAXATION OF 3D PRINTED PLA OF VARIOUS INFILL ORIENTATIONS UNDER TENSILE AND BENDING LOADINGS |
JOURNAL OF APPLIED POLYMER SCIENCE |
2023 |
(SCI-Expanded) |
| GÜLÇİMEN ÇAKAN B. |
EFFECTS OF RASTER ANGLE ON TENSILE AND SURFACE ROUGHNESS PROPERTIES OF VARIOUS FDM FILAMENTS |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
2021 |
(SCI-Expanded) |
| GÜLÇİMEN ÇAKAN B., HAHNER P., SOYARSLAN C., BARGMANN S. |
AN ENHANCED METHOD TO EVALUATE TENSILE YIELD STRESS BY SMALL PUNCH TESTS USING DEFLECTION CURVES |
MATERIALS |
2020 |
(SCI-Expanded) |
| HAHNER P., SOYARSLAN C., GÜLÇİMEN ÇAKAN B., BARGMANN S. |
DETERMINING TENSILE YIELD STRESSES FROM SMALL PUNCH TESTS: A NUMERICAL-BASED SCHEME |
MATERIALS & DESIGN |
2019 |
(SCI-Expanded) |
| GÜLÇİMEN ÇAKAN B., SOYARSLAN C., BARGMANN S., HAHNER P. |
EXPERIMENTAL AND COMPUTATIONAL STUDY OF DUCTILE FRACTURE IN SMALL PUNCH TESTS |
MATERIALS |
2017 |
(SCI-Expanded) |
| SOYARSLAN C., GULCIMEN B., BARGMANN S., HAHNER P. |
MODELING OF FRACTURE IN SMALL PUNCH TESTS FOR SMALL- AND LARGE-SCALE YIELDING CONDITIONS AT VARIOUS TEMPERATURES |
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES |
2016 |
(SCI-Expanded) |
| GULCIMEN B., HAHNER P. |
DETERMINATION OF CREEP PROPERTIES OF A P91 WELDMENT BY SMALL PUNCH TESTING AND A NEW EVALUATION APPROACH |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
2013 |
(SCI-Expanded) |
| GULCIMEN B., DURMUS A., ULKU S., HURST R. C., TURBA K., HAHNER P. |
MECHANICAL CHARACTERISATION OF A P91 WELDMENT BY MEANS OF SMALL PUNCH FRACTURE TESTING |
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING |
2013 |
(SCI-Expanded) |
| TURBA K., GULCIMEN B., LI Y. Z., BLAGOEVA D., HAHNER P., HURST R. C. |
INTRODUCTION OF A NEW NOTCHED SPECIMEN GEOMETRY TO DETERMINE FRACTURE PROPERTIES BY SMALL PUNCH TESTING |
ENGINEERING FRACTURE MECHANICS |
2011 |
(SCI-Expanded) |
| DURMUS A., GUDEN M., GULCIMEN B., ULKU S., MUSA E. |
EXPERIMENTAL INVESTIGATIONS ON THE BALLISTIC IMPACT PERFORMANCES OF COLD ROLLED SHEET METALS |
MATERIALS & DESIGN |
2011 |
(SCI-Expanded) |
| YILDIZ B. S. |
MARINE PREDATORS ALGORITHM AND MULTI-VERSE OPTIMISATION ALGORITHM FOR OPTIMAL BATTERY CASE DESIGN OF ELECTRIC VEHICLES |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2022 |
(SCI-Expanded) |
| YILDIZ B. S. |
THE MINE BLAST ALGORITHM FOR THE STRUCTURAL OPTIMIZATION OF ELECTRICAL VEHICLE COMPONENTS |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| YILDIZ B. S. |
OPTIMAL DESIGN OF AUTOMOBILE STRUCTURES USING MOTH-FLAME OPTIMIZATION ALGORITHM AND RESPONSE SURFACE METHODOLOGY |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| YILDIZ B. S. |
THE SPOTTED HYENA OPTIMIZATION ALGORITHM FOR WEIGHT-REDUCTION OF AUTOMOBILE BRAKE COMPONENTS |
MATERIALS TESTING |
2020 |
(SCI-Expanded) |
| YILDIZ B. S. |
SLIME MOULD ALGORITHM AND KRIGING SURROGATE MODEL-BASED APPROACH FOR ENHANCED CRASHWORTHINESS OF ELECTRIC VEHICLES |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2020 |
(SCI-Expanded) |
| YILDIZ B. S. |
ROBUST DESIGN OF ELECTRIC VEHICLE COMPONENTS USING A NEW HYBRID SALP SWARM ALGORITHM AND RADIAL BASIS FUNCTION-BASED APPROACH |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2020 |
(SCI-Expanded) |
| YILDIZ B. S. |
NATURAL FREQUENCY OPTIMIZATION OF VEHICLE COMPONENTS USING THE INTERIOR SEARCH ALGORITHM |
MATERIALS TESTING |
2017 |
(SCI-Expanded) |
| YILDIZ B. S., LEKESIZ H. |
FATIGUE-BASED STRUCTURAL OPTIMISATION OF VEHICLE COMPONENTS |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2017 |
(SCI-Expanded) |
| YILDIZ B. S. |
A COMPARATIVE INVESTIGATION OF EIGHT RECENT POPULATION-BASED OPTIMISATION ALGORITHMS FOR MECHANICAL AND STRUCTURAL DESIGN PROBLEMS |
INTERNATIONAL JOURNAL OF VEHICLE DESIGN |
2017 |
(SCI-Expanded) |
| ŞENER B., ÇAVUŞOĞLU O., YÜCE C. |
EFFECTS OF PROCESS PARAMETERS ON SURFACE QUALITY AND MECHANICAL PERFORMANCE OF 316L STAINLESS STEEL PRODUCED BY SELECTIVE LASER MELTING |
OPTIK |
2023 |
(SCI-Expanded) |
| ÇAVUŞOĞLU O., YUCE C., AYDIN H. |
MECHANICAL CHARACTERIZATION AND MICROSTRUCTURE OF FIBER LASER WELDED TWIP980 STEEL DEPENDING ON WELDING SPEED AND FOCAL DISTANCE |
OPTIK |
2023 |
(SCI-Expanded) |
| TÜRKKAN Y. A., ASLAN M., TARKAN A., ASLAN Ö., YÜCE C., YAVUZ N. |
MULTI-OBJECTIVE OPTIMIZATION OF FIBER LASER CUTTING OF STAINLESS-STEEL PLATES USING TAGUCHI-BASED GREY RELATIONAL ANALYSIS |
METALS |
2023 |
(SCI-Expanded) |
| YUCE C. |
MULTI-OBJECTIVE OPTIMISATION FOR INDENTATION RATE, NUGGET DIAMETER AND TENSILE LOAD IN RESISTANCE SPOT WELDING USING TAGUCHI-BASED GREY RELATIONAL ANALYSIS |
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY |
2021 |
(SCI-Expanded) |
| ERZAN TOPÇU E., KILIÇ E. |
A NUMERICAL INVESTIGATION OF SLOSHING IN A 3D PRISMATIC TANK WITH VARIOUS BAFFLE TYPES, FILLING RATES, INPUT AMPLITUDES AND LIQUID MATERIALS |
APPLIED SCIENCES |
2023 |
(SCI-Expanded) |
| ERZAN TOPÇU E., VATANSEVER B., NUREL A. |
EXPERIMENTAL AND DYNAMIC THERMAL NUMERICAL INVESTIGATION OF A CLIMATE TEST CHAMBER |
MATERIALS TESTING |
2022 |
(SCI-Expanded) |
| ERZAN TOPÇU E., BALI E. |
MODELING AND ANALYSIS OF AN ELECTRO-PNEUMATIC BRAKE VALVE WITH ON-OFF TYPE SOLENOID DRIVEN BY PWM TECHNIQUE |
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY |
2021 |
(SCI-Expanded) |
| ERZAN TOPÇU E. |
PC-BASED CONTROL AND SIMULATION OF AN ELECTRO-HYDRAULIC SYSTEM |
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION |
2017 |
(SCI-Expanded) |
| ERZAN TOPÇU E., DEMIRKESEN A., YUKSEL I. |
INVESTIGATION OF AN OBJECT FOLLOWER SYSTEM |
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES |
2016 |
(SCI-Expanded) |
| ERZAN TOPÇU E., KAMIŞ KOCABIÇAK Z., YUEKSEL I. |
SIMPLIFIED NUMERICAL SOLUTION OF ELECTROMECHANICAL SYSTEMS BY LOOK-UP TABLES |
MECHATRONICS |
2008 |
(SCI-Expanded) |
| TOPCU E., YUEKSEL I., KAMIS Z. |
DEVELOPMENT OF ELECTRO-PNEUMATIC FAST SWITCHING VALVE AND INVESTIGATION OF ITS CHARACTERISTICS |
MECHATRONICS |
2006 |
(SCI-Expanded) |
| KAMIS Z., TOPCU E., YUKSEL I. |
COMPUTERP-AIDED AUTOMATIC CONTROL EDUCATION WITH A REAL-TIME DEVELOPMENT SYSTEM |
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION |
2005 |
(SCI-Expanded) |
| KARADERE G., KOPMAZ O., GULLU E. |
TRANSIENT PHENOMENA DURING ENGAGEMENT PHASE OF A CLUTCH |
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY |
2010 |
(SCI-Expanded) |
| KARADERE G., KOPMAZ O., GULLU E. |
A NEW APPROACH TO THE KINEMATICAL ANALYSIS OF UNIVERSAL JOINTS |
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY |
2010 |
(SCI-Expanded) |
| KARADERE G. |
THE EFFECTS OF THE TOTAL BEARING DEFORMATION ON THE PERFORMANCE OF HYDRODYNAMIC THRUST BEARINGS |
INDUSTRIAL LUBRICATION AND TRIBOLOGY |
2010 |
(SCI-Expanded) |
| PALA Y., GUNEY I., KARADERE G. |
ANALYTICAL SOLUTION OF DIRECT DYNAMICS PROBLEM IN CYLINDRICAL COORDINATES |
JOURNAL OF ENGINEERING MECHANICS-ASCE |
2004 |
(SCI-Expanded) |
| KORUKCU M. Ö. |
NUMERICAL MODELING OF HEAT AND MASS TRANSFER CHARACTERISTICS DURING THE FORCED CONVECTION DRYING OF A SQUARE CYLINDER UNDER STRONG BLOCKAGE |
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS |
2017 |
(SCI-Expanded) |
| KORUKCU M. Ö. |
2D TEMPERATURE ANALYSIS OF ENERGY AND EXERGY CHARACTERISTICS OF LAMINAR STEADY FLOW ACROSS A SQUARE CYLINDER UNDER STRONG BLOCKAGE |
ENTROPY |
2015 |
(SCI-Expanded) |
| REIS M., ŞERIFAĞAOĞLU E. |
A SMART HANDHELD WELDING TORCH DEVICE FOR MANUAL SPOT LASER WELDING |
APPLIED SCIENCES (SWITZERLAND) |
2022 |
(SCI-Expanded) |
| COCUZZA S., DORIA A., REİS M. |
VIBRATION-BASED LOCOMOTION OF AN AMPHIBIOUS ROBOT |
APPLIED SCIENCES-BASEL |
2021 |
(SCI-Expanded) |
| MURAT R., EBRAHIMI N., JAFARI A. |
ELASTIC ACTUATOR DESIGN BASED ON BENDING OF CYLINDRICAL BEAM FOR ROBOTIC APPLICATIONS |
ACTUATORS |
2020 |
(SCI-Expanded) |
| REİS M. |
VIBRATION BASED UNDER-ACTUATED BOUNDING MECHANISM |
JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS |
2016 |
(SCI-Expanded) |
| REİS M., IIDA F. |
AN ENERGY-EFFICIENT HOPPING ROBOT BASED ON FREE VIBRATION OF A CURVED BEAM |
IEEE-ASME TRANSACTIONS ON MECHATRONICS |
2014 |
(SCI-Expanded) |
| REİS M., YU X., MAHESHWARI N., IIDA F. |
MORPHOLOGICAL COMPUTATION OF MULTI-GAITED ROBOT LOCOMOTION BASED ON FREE VIBRATION |
ARTIFICIAL LIFE |
2013 |
(SCI-Expanded) |
| YAŞAR E., REİS M. |
APPLICATION OF THE JACOBI METHOD AND INTEGRATING FACTORS TO A CLASS OF PAINLEVE-GAMBIER EQUATIONS |
JOURNAL OF PHYSICS A-MATHEMATICAL AND THEORETICAL |
2010 |
(SCI-Expanded) |
| YEMENİCİ O. |
EXPERIMENTAL EVALUATION OF WIND LOADS ON A GROUND-MOUNTED SOLAR PANEL OF VARIOUS GROUND CLEARANCES AND REYNOLDS NUMBERS |
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES |
2021 |
(SCI-Expanded) |
| YEMENİCİ O., AKSOY M. O. |
AN EXPERIMENTAL AND NUMERICAL STUDY OF WIND EFFECTS ON A GROUND-MOUNTED SOLAR PANEL AT DIFFERENT PANEL TILT ANGLES AND WIND DIRECTIONS |
JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS |
2021 |
(SCI-Expanded) |
| YEMENİCİ O. |
EXPERIMENTAL STUDY OF AERODYNAMIC LOADS ON GROUND-MOUNTED SOLAR PANEL ARRAYS: THE PANEL SPACING AND INCLINATION ANGLE EFFECT |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
2020 |
(SCI-Expanded) |
| YEMENICI O., FIRATOGLU Z. A. |
TRANSITIONAL BOUNDARY LAYER FLOW AND HEAT TRANSFER OVER BLOCKED SURFACES WITH INFLUENCE OF FREE STREAM VELOCITY AND BLOCK HEIGHT |
HEAT AND MASS TRANSFER |
2013 |
(SCI-Expanded) |
| YEMENICI O., FIRATOGLU Z. A. |
AN ANALYSIS OF FLOW AND HEAT TRANSFER IN SEPARATED FLOWS OVER BLOCKED SURFACE |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
2013 |
(SCI-Expanded) |
| ÖÇAL A. E., LEKESIZ H., ÇETIN S. |
THE DEVELOPMENT OF AN INNOVATIVE OCCUPATIONAL PASSIVE UPPER EXTREMITY EXOSKELETON AND AN INVESTIGATION OF ITS EFFECTS ON MUSCLES |
APPLIED SCIENCES |
2023 |
(SCI-Expanded) |
| ESER S., CETIN S. |
OPTIMUM CONTROL OF A FLEXIBLE SINGLE LINK MANIPULATOR WITH ARTIFICIAL BEE COLONY ALGORITHM |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS |
2022 |
(SCI-Expanded) |
| TELLI S., KOPMAZ O. |
FREE VIBRATIONS OF A MASS GROUNDED BY LINEAR AND NONLINEAR SPRINGS IN SERIES |
JOURNAL OF SOUND AND VIBRATION |
2006 |
(SCI-Expanded) |
| KOPMAZ O., TELLI S. |
COMMENTS ON "ON THE EIGENFREQUENCIES OF A TWO-PART BEAM-MASS SYSTEM" - AUTHORS' REPLY |
JOURNAL OF SOUND AND VIBRATION |
2003 |
(SCI-Expanded) |
| KOPMAZ O., TELLI S. |
ON THE EIGENFREQUENCIES OF A TWO-PART BEAM-MASS SYSTEM |
JOURNAL OF SOUND AND VIBRATION |
2002 |
(SCI-Expanded) |
| KOPMAZ O., TELLI S. |
FREE VIBRATIONS OF A RECTANGULAR PLATE CARRYING A DISTRIBUTED MASS |
JOURNAL OF SOUND AND VIBRATION |
2002 |
(SCI-Expanded) |
| CANBOLAT A. S., KAYNAKLI Ö., BADEMLIOĞLU A. H. |
THERMOHYDRAULIC PERFORMANCE OPTIMIZATION OF AUTOMOBILE RADIATORS USING STATISTICAL APPROACHES |
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS |
2021 |
(SCI-Expanded) |
| CANBOLAT A. S., TÜRKAN B. |
NUMERICAL INVESTIGATION INTO THERMAL PERFORMANCE PARAMETERS OF AUTOMOBILE RADIATORS |
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY |
2016 |
(SCI-Expanded) |
| SAYMAN O., ÖZEN M., OZEL A., DEMİR T., KORKMAZ B. |
A NON-LINEAR ELASTIC-PLASTIC STRESS ANALYSIS IN A DUCTILE DOUBLE-LAP JOINT |
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS |
2013 |
(SCI-Expanded) |
| SAYMAN O., ÖZEN M., KORKMAZ B. |
ELASTO-PLASTIC STRESS DISTRIBUTIONS IN ADHESIVELY BONDED DOUBLE LAP JOINTS |
MATERIALS & DESIGN |
2013 |
(SCI-Expanded) |
| SOYKOK I. F., SAYMAN O., ÖZEN M., KORKMAZ B. |
FAILURE ANALYSIS OF MECHANICALLY FASTENED GLASS FIBER/EPOXY COMPOSITE JOINTS UNDER THERMAL EFFECTS |
COMPOSITES PART B-ENGINEERING |
2013 |
(SCI-Expanded) |
| AKÇAY S., Ş EFKAT G. |
VIBRATIONAL COMFORT IMPROVEMENT FOR A PASSENGER CAR DRIVER SEAT |
MATERIALS TESTING |
2023 |
(SCI-Expanded) |
| ŞEFKAT G., ÖZEL M. A. |
EXPERIMENTAL AND NUMERICAL STUDY OF ENERGY AND THERMAL MANAGEMENT SYSTEM FOR A HYDROGEN FUEL CELL-BATTERY HYBRID ELECTRIC VEHICLE |
ENERGY |
2022 |
(SCI-Expanded) |
| ŞEFKAT G. |
INVESTIGATING STATIC AND DYNAMIC CHARACTERISTICS OF ELECTROMECHANICAL ACTUATORS (EMA) WITH MATLAB GUIS |
COMPUTER APPLICATIONS IN ENGINEERING EDUCATION |
2010 |
(SCI-Expanded) |
| ŞEFKAT G. |
THE DESIGN OPTIMIZATION OF THE ELECTROMECHANICAL ACTUATOR |
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION |
2009 |
(SCI-Expanded) |
| REIS M., TÜFEKCI K. |
A VARIABLE CLUTCH MECHANISM FOR ADJUSTABLE STIFFNESS ACTUATORS BASED ON BENDING AND TORSION OF PRISMATIC BEAMS |
ACTUATORS |
2023 |
(SCI-Expanded) |
| EFE T., DEMİRDAĞ S., TÜFEKCİ K., ŞENGÜN N., ALTINDAĞ R. |
ESTIMATING THE DIRECT TENSILE STRENGTH OF ROCKS FROM INDIRECT TESTS |
ARABIAN JOURNAL OF GEOSCIENCES |
2021 |
(SCI-Expanded) |
| SÜZER B., SEYİDOĞLU N., TÜFEKCİ K., INAN S. |
THE RELATIONSHIP BETWEEN SPIRULINA PLATENSIS AND SELECTED BIOMECHANICAL INDICATORS OF TIBIAE IN RATS |
VETERINARNI MEDICINA |
2020 |
(SCI-Expanded) |
| SUZER B., PETEK M., TÜFEKCI K., ARICAN İ., ABDOURHAMANE I. M., YILDIZ H. |
COMPARISON OF SOME BIOMECHANICAL PROPERTIES OF TIBIOTARSUS IN FOUR DIFFERENT FEATHER COLOR LINES OF 60-DAY OLD FEMALE QUAILS |
BRAZILIAN JOURNAL OF POULTRY SCIENCE |
2020 |
(SCI-Expanded) |
| SÜZER B., TÜFEKCİ K., ARICAN İ., PETEK M., ABDOURHAMANE I. M., OZBEK M., ET AL. |
EFFECTS OF GENOTYPE AND HOUSING SYSTEM ON SOME BONE BIOMECHANICAL CHARACTERISTICS IN BROILER CHICKENS |
ANKARA UNIVERSITESI VETERINER FAKULTESI DERGISI |
2019 |
(SCI-Expanded) |
| KURTULUŞ K., TUFEKCI K. |
EMPIRICAL STUDY OF ALGINATE IMPRESSION MATERIALS BY CUSTOMIZED PROPORTIONING SYSTEM |
JOURNAL OF ADVANCED PROSTHODONTICS |
2016 |
(SCI-Expanded) |
| TUFEKCI K., KAYACAN R., KURBANOGLU C. |
EFFECTS OF GAMMA RADIATION STERILIZATION AND STRAIN RATE ON COMPRESSIVE BEHAVIOR OF EQUINE CORTICAL BONE |
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS |
2014 |
(SCI-Expanded) |
| YAVUZ H., TUFEKCI K., KAYACAN R., CEVİZCİ H. |
PREDICTING THE DYNAMIC COMPRESSIVE STRENGTH OF CARBONATE ROCKS FROM QUASI-STATIC PROPERTIES |
EXPERIMENTAL MECHANICS |
2013 |
(SCI-Expanded) |
| DEMİRDAĞ S., TUFEKCI K., KAYACAN R., YAVUZ H., ALTINDAĞ R. |
DYNAMIC MECHANICAL BEHAVIOR OF SOME CARBONATE ROCKS |
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES |
2010 |
(SCI-Expanded) |
| TUFEKCI K., KURBANOGLU C., DURAK E., TUNAY R. |
FRICTION AND WEAR PROPERTIES OF CU AND FE-BASED P/M BEARING MATERIALS |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY |
2006 |
(SCI-Expanded) |
| SUNAY N., KAYA M., YILMAZ M. S., KAYNAK Y. |
EFFECTS OF HEAT TREATMENT ON SURFACE INTEGRITY AND WEAR PERFORMANCE OF INCONEL 718 ALLOY FABRICATED BY LASER POWDER BED FUSION PROCESS ADDITIVE MANUFACTURING UNDER DIFFERENT LASER POWER AND SCANNING SPEED PARAMETERS |
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING |
2023 |
(SCI-Expanded) |
| ÇAKAN D., ERTUĞRUL O., YILMAZ M. S. |
AGING HEAT TREATMENT OF ADDITIVELY MANUFACTURED MARAGING STEELS IN NITROGEN CONTAINING ATMOSPHERES |
MATERIALS TODAY COMMUNICATIONS |
2023 |
(SCI-Expanded) |
| KHAN H. M., YILMAZ M. S., KARABEYOĞLU S. S., KISASÖZ A., ÖZER G. |
DRY SLIDING WEAR BEHAVIOR OF 316 L STAINLESS STEEL PRODUCED BY LASER POWDER BED FUSION: A COMPARATIVE STUDY ON TEST TEMPERATURE |
MATERIALS TODAY COMMUNICATIONS |
2023 |
(SCI-Expanded) |
| GUNESSU E., YILMAZ M. S., TASCIOGLU E., SHARIF S., KAYNAK Y. |
EFFECT OF DRAG FINISH POST-PROCESSING ON SURFACE INTEGRITY AND WEAR BEHAVIOR OF TI-6AL-4V FABRICATED BY LASER POWDER BED FUSION ADDITIVE MANUFACTURING |
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE |
2022 |
(SCI-Expanded) |
| OZER G., KHAN H. M., TARAKCI G., YILMAZ M. S., YAMAN P., KARABEYOGLU S. S., ET AL. |
EFFECT OF HEAT TREATMENTS ON THE MICROSTRUCTURE AND WEAR BEHAVIOUR OF A SELECTIVE LASER MELTED MARAGING STEEL |
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING |
2022 |
(SCI-Expanded) |
| TARAKCI G., KHAN H. M., YILMAZ M. S., OZER G. |
EFFECT OF BUILDING ORIENTATIONS AND HEAT TREATMENTS ON ALSI10MG ALLOY FABRICATED BY SELECTIVE LASER MELTING: MICROSTRUCTURE EVOLUTION, MECHANICAL PROPERTIES, FRACTURE MECHANISM AND CORROSION BEHAVIOR |
RAPID PROTOTYPING JOURNAL |
2022 |
(SCI-Expanded) |
| KHAN H. M., OZER G., YILMAZ M. S., KOC E. |
CORROSION OF ADDITIVELY MANUFACTURED METALLIC COMPONENTS: A REVIEW |
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING |
2022 |
(SCI-Expanded) |
| KHAN H. M., OZER G., YILMAZ M. S., TARAKCI G. |
IMPROVEMENT OF CORROSION RESISTANCE OF MARAGING STEEL MANUFACTURED BY SELECTIVE LASER MELTING THROUGH INTERCRITICAL HEAT TREATMENT |
CORROSION |
2022 |
(SCI-Expanded) |
| YILMAZ M. S., OZER G., SAHIN O., KARAASLAN A. |
INVESTIGATION OF THE EFFECTS OF DIFFERENT RETROGRESSION AND RE-AGING PARAMETERS APPLIED TO THE 7075 ALLOY ON THE MICRO-ARC OXIDATION PROCESS |
SURFACE REVIEW AND LETTERS |
2021 |
(SCI-Expanded) |
| YILMAZ M. S., OZER G., OTER Z. C., ERTUGRUL O. |
EFFECTS OF HOT ISOSTATIC PRESSING AND HEAT TREATMENTS ON STRUCTURAL AND CORROSION PROPERTIES OF DIRECT METAL LASER SINTERED PARTS |
RAPID PROTOTYPING JOURNAL |
2021 |
(SCI-Expanded) |
| ERTUGRUL O., OTER Z. C., YILMAZ M. S., SAHIN E., COSKUN M., TARAKCI G., ET AL. |
EFFECT OF HIP PROCESS AND SUBSEQUENT HEAT TREATMENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF DIRECT METAL LASER SINTERED ALSI10MG ALLOY |
RAPID PROTOTYPING JOURNAL |
2020 |
(SCI-Expanded) |
| OZER G., OZBAY B., OTER Z. C., TARAKCI G., YILMAZ M. S., BULDUK M. E., ET AL. |
INVESTIGATION OF THE SURFACE QUALITY AND DIMENSIONAL ACCURACY OF POLYMER PATTERNS PRODUCED BY SELECTIVE LASER SINTERING (SLS) METHOD FOR INVESTMENT CASTING (IC) |
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH |
2020 |
(SCI-Expanded) |
| OZER G., TARAKCI G., YILMAZ M. S., OTER Z. C., SURMEN O., AKCA Y., ET AL. |
INVESTIGATION OF THE EFFECTS OF DIFFERENT HEAT TREATMENT PARAMETERS ON THE CORROSION AND MECHANICAL PROPERTIES OF THE ALSI10MG ALLOY PRODUCED WITH DIRECT METAL LASER SINTERING |
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION |
2020 |
(SCI-Expanded) |
| OTER Z. C., COSKUN M., AKCA Y., SURMEN O., YILMAZ M. S., OZER G., ET AL. |
BENEFITS OF LASER BEAM BASED ADDITIVE MANUFACTURING IN DIE PRODUCTION |
OPTIK |
2019 |
(SCI-Expanded) |
| OTER Z. C., COSKUN M., AKCA Y., SURMEN O., YILMAZ M. S., OZER G., ET AL. |
SUPPORT OPTIMIZATION FOR OVERHANGING PARTS IN DIRECT METAL LASER SINTERING |
OPTIK |
2019 |
(SCI-Expanded) |
| YILMAZ M. S., SAHIN O. |
APPLYING HIGH VOLTAGE CATHODIC PULSE WITH VARIOUS PULSE DURATIONS ON ALUMINIUM VIA MICRO-ARC OXIDATION (MAO) |
SURFACE & COATINGS TECHNOLOGY |
2018 |
(SCI-Expanded) |
| YILMAZ M. S., SAHIN O. |
EFFECTS OF PULSE DURATION ON STRUCTURE AND SURFACE CHARACTERISTICS OF MICRO-ARC OXIDATION COATINGS FORMED ON ALUMINUM ALLOY |
ACTA PHYSICA POLONICA A |
2016 |
(SCI-Expanded) |
| CAKIR A., YILMAZ M. S., RIBALKO A., KORKMAZ K. |
A STUDY ON MODIFICATION OF MICRO-ALLOY STEEL SURFACES WITH DIFFERENT HARD MATERIALS VIA ELECTRO-SPARK DEPOSITION METHOD |
ACTA PHYSICA POLONICA A |
2015 |
(SCI-Expanded) |
| YILMAZ M. S., CAKIR A., RIBALKO A., KORKMAZ K. |
FABRICATION OF BIOACTIVE COATINGS ON STEEL SUBSTRATES BY ELECTRO-SPARK DEPOSITION (ESD) AND MICRO-ARC OXIDATION (MAO) METHODS |
ACTA PHYSICA POLONICA A |
2015 |
(SCI-Expanded) |
| DÜZGÜN E., KOPMAZ O. |
TWO PRACTICAL METHODS FOR THE FORWARD KINEMATICS OF 3-3 TYPE SPATIAL AND 3-RRR PLANAR PARALLEL MANIPULATORS |
APPLIED SCIENCES-BASEL |
2022 |
(SCI-Expanded) |
