2024 

1. Kucuk M., Sener R., SÜRMEN A. (2024). Effectiveness of hydrogen enrichment strategy for Wankel engines in unmanned aerial vehicle applications at various altitudes. International Journal of Hydrogen Energy, cilt.52, ss.1534-1549.
2. Kucuk M., SÜRMEN A., Sener R. (2024). Combustion characteristics and performance of a Wankel engine for unmanned aerial vehicles at various altitudes. Fuel, cilt.355.
3. Ozada C., Unal M., Yazıcı M. (2024). Supercapacitor: Fundamentals and materials. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, cilt.39, sa.2, ss.1315-1331.
4. Rizelioğlu M., YAZICI M. (2024). New Approach to Determining the Roughness of Bicycle Roads. TRANSPORTATION RESEARCH RECORD, cilt.2678, sa.1, ss.781-793.
5. Sevilgen G., Bayram H., Tatari D. (2024). The 1d Model of Hybrid Heat Pump System Designed and Prototyped for Electric Vehicles. CASE STUDIES IN THERMAL ENGINEERING, cilt.60, sa.105050, ss.1-25.
6. Tahirağaoğlu B., Sevilgen G., Hamut H. S. (2024). The Numerical and Experimental Investigation of the Transient Behaviours of a Lithium-ion Pouch Battery Cell Under Dynamic Conditions. CASE STUDIES IN THERMAL ENGINEERING, cilt.62, sa.105169, ss.1-21.
7. TEKİN M., KARAMANGİL M. İ. (2024). Development of dual polarization battery model with high accuracy for a lithium-ion battery cell under dynamic driving cycle conditions. Heliyon, cilt.10, sa.7.
8. Tekin M., Karamangil M. İ. (2024). Comparative analysis of equivalent circuit battery models for electric vehicle battery management systems. JOURNAL OF ENERGY STORAGE, cilt.86, sa.Part B, ss.1-11.
9. Yiğit B. H., Karamangil M. İ. (2024). Selection powertrain for 25m bi-articulated series hybrid, electric or fuel cell vehicle operating on Istanbul Bus Rapid Transit Line. ENGINEERING SCIENCE AND TECHNOLOGY, AN INTERNATIONAL JOURNAL, cilt.54, ss.1-14.
10. YILDIZ A., Ibram E., Erol O., GÜLER ÖZGÜL H. (2024). Free vibration analyses of 3D printed plates with different geometric fillings: experimental testing and numerical simulations. ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES.
11. Aras S., ERTAN R. (2024). STUDYING THE STRENGTH OF DISSIMILAR JOINTS OF AISI 430 AND 301 STAINLESS STEEL WELDED AT DIFFERENT WELDING PARAMETERS TRDNOST ZVARNIH SPOJEV MED NERJAVNIMA JEKLOMA VRSTE AISI 430 IN 301 V ODVISNOSTI OD RAZLIČNIH PARAMETROV VARJENJA. Materiali in Tehnologije, cilt.58, sa.2, ss.121-127.
12. Erdogan O., Sevinc S., Ertan R. (2024). FORMABILITY CAPABILITIES AND MECHANICAL PROPERTIES OF TITANIUM TAILOR-WELDED BLANKS. MATERIALI IN TEHNOLOGIJE, sa.3, ss.421-427.
13. Canbolat A. S., Albak E. İ. (2024). Multi-Objective Optimization of Building Design Parameters for Cost Reduction and CO2 Emission Control Using Four Different Algorithms. APPLIED SCIENCES, cilt.14, sa.17, ss.1-24.
14. Hayirkus A., MOTORCU A. R., YAZICI M. (2024). Development of a heavy vehicle torque rod applying continuous fiber reinforced thermoplastic composite materials instead of forged steel material: Design, analysis and optimization. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE.
15. RİZELİOĞLU M., ARSLAN T., YİĞİT E., Yazlcl M. (2024). Using a Bike as a Probe Vehicle: Experimental Study to Determine Road Roughness with Piezoelectric Sensors. JOURNAL OF INFRASTRUCTURE SYSTEMS, cilt.30, sa.3.
16. Işik M. (2024). Crack elimination of laser powder directed energy deposition Inconel 738LC using in-situ addition of Inconel 718: A comprehensive study on the mechanical and corrosion resistivity properties. JOURNAL OF ALLOYS AND COMPOUNDS, cilt.175805, ss.1-35.
17. Işık M. (2024). The effect of additively and subtractively created center internal features on microstructure and mechanical performance of inconel-718 parts. RAPID PROTOTYPING JOURNAL, cilt.30, sa.2, ss.287-304.
18. KAMIŞ KOCABIÇAK Z., Acar Z. (2024). Taguchi-Based Grey Relational Analysis on Multiple Damping Characteristics of a Hydraulic Engine Mount. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING.
19. SÜRMEN A., KARAMANGİL M. İ., AVCI A., Dirim B., IŞIKLI F., TEKİN M. E., et al. (2024). Experimental analysis of the volumetric and thermal efficiency performance of a novel direct piezo-acting CVVT mechanism. International Journal of Green Energy. 
20. Işıklı, Fırat, Gökhan Şentürk, and Ali Sürmen. 2024. "Effects of Valve, Armature, and Armature Pin Guidance on Diesel Injector Performance" Applied Sciences 14, no. 13: 5737. https://doi.org/10.3390/app14135737
21. Yemenici, O., Donmez, M. (2024) Estimation of the performance of different pumps using non-Newtonian fluids in various operating conditions with artificial neural network. Arab J Sci Eng 49, 14607–14623 https://doi.org/10.1007/s13369-024-08729-9
22. Yildizbakan, Lemiha, Neelam Iqbal, Peter V. Giannoudis, and Animesh Jha. 2024. "Synthesis of Chitosan and Ferric-Ion (Fe 3+ )-Doped Brushite Mineral Cancellous Bone Scaffolds" Biomimetics 9, no. 6: 308. https://doi.org/10.3390/biomimetics9060308
23. Iqbal, Neelam, Payal Ganguly, Lemiha Yildizbakan, El Mostafa Raif, Elena Jones, Peter V. Giannoudis, and Animesh Jha. 2024. "Chitosan Scaffolds from Crustacean and Fungal Sources: A Comparative Study for Bone-Tissue-Engineering Applications" Bioengineering 11, no. 7: 720. https://doi.org/10.3390/bioengineering11070720

2023 

1. Işık M. (2023). Fabrication of Electron Beam Melted Titanium Aluminide: The Effects of Machining Parameters and Heat Treatment on Surface Roughness and Hardness. METALS, cilt.13, sa.12, ss.1952-1969.
2. Gokmen S., ERTAN R., Özgül H. G. (2023). Effect of temperature and rolling direction on the formability of CP2 and Ti-6Al-4V titanium materials. Materialpruefung/Materials Testing.
3. Sevilgen, G., Dursun, H.,  & Kılıç, M., (2023). Experimental and Numerical Investigations on the Thermal Performance of Three Different Cold Plates Designed for the Electrical Vehicle Battery Module.  SUSTAINABILITY, cilt.15, sa.19, 1-21.
4. Sevilgen G., Kiliç M., Bayram H., Başak E., Dursun H. (2023). The Investigation of the innovative Hybrid Heat Pump System Designed and Prototyped for Heating Process of Electric Vehicles. AEJ - ALEXANDRIA ENGINEERING JOURNAL, cilt.68, ss.417-435.
5. Eşiyok F., Ertan R., Sevilgen G., Bulut E., Öztürk F., Alyay İ., et al. (2023). A comparative study on conventional and hybrid quenching hot forming methods of 22MnB5 steel for mechanical properties and microstructure. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, cilt.32, ss.1347-1356.
6. Tekin M., Karamangil M. İ. (2023). Development and comparative analysis of a pure fuel cell configuration for a light commercial vehicle. INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, cilt.20, sa.6, ss.6197-6208.
7. Boztoprak Y., Ünal M., Özada Ç., Kuzu E., Özer H., Ergin F., et al. (2023). Sound insulation performance of honeycomb core aluminum sandwich panels with flexible epoxy-based foam infill. Composite Structures, cilt.319.
8. Kasim H., BOZTOPRAK Y., YAZICI M. (2023). Investigation of crack detection properties of elastomer-based nanocomposites under cyclic strain loading with graphene and carbon black interaction filler. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, cilt.36, sa.4, ss.1576-1605.
9. Güçlü H., Osmanoğlu S., Hayırkuş A., Taş O., Yazıcı M. (2023). An easy-to-implement self-healing smart design for increasing impact strength and crashworthiness resistance of honeycomb sandwich structures. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, cilt.237, sa.4, ss.812-829.
10. Güçlü H., Kasım H., Yazıcı M. (2023). Investigation of the optimum vibration energy harvesting performance of electrospun PVDF/BaTiO3 nanogenerator. JOURNAL OF COMPOSITE MATERIALS, cilt.57, sa.3, ss.409-424.
11. Boke T. A., ALBAK E. İ., KAYA N., Bozkurt R., Ergul M., Ozturk D., et al. (2023). Correlation between objective and subjective tests for vehicle ride comfort evaluations.  PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, cilt.237, sa.4, ss.706-721.
12. Işık M.  (2023). Additive manufacturing and characterization of a stainless steel and a nickel alloy MATERIALPRUEFUNG/MATERIALS TESTING, cilt.65, sa.3, ss.378-388.
13. Işık M.  (2023). Investigation of the Influence of High-Pressure Torsion and Solution Treatment on Corrosion and Tribocorrosion Behavior of CoCrMo Alloys for Biomedical Applications. CRYSTALS, cilt.13, sa.4, ss.590-604.
14. Duran G., Donmez M., İlkılıç C. (2023). MİKROALG VE MİKROALG – ETANOL KARIŞIMLARI KULLANIMININ MOTOR PERFORMANS VE EMİSYONLARI ÜZERİNE BİR İNCELEME. Isı Bilimi ve Tekniği Dergisi , cilt.43, sa.1, ss.107-118.
15. Albak E. İ. (2023). Optimization design for circular multi-cell thin-walled tubes with discrete and continuous design variables. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, cilt.30, sa.24, ss.5091-5105.

2022

1. BULUT E., ALBAK E. İ., SEVİLGEN G., ÖZTÜRK F. INTERNATIONAL JOURNAL OF ENERGY RESEARCH , cilt.46, sa.6, ss.7293-7308, 2022. Prediction and optimization of the design decisions of liquid cooling systems of battery modules using artificial neural networks
2. Bayram H., Sevilgen G., Aydın A. HEAT TRANSFER RESEARCH , cilt.53, sa.2, ss.45-57, 2022. EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE WINDSHIELD DEICING ANALYSIS OF A COMMERCIAL VEHICLE
3. KILIÇ M., Guler T., SEVİLGEN G. HEAT TRANSFER RESEARCH, cilt.53, sa.5, ss.17-30, 2022.  NOVEL AIR DUCT COOLING PERFORMANCE EVALUATION FOR THE REFRIGERATED PRODUCT TRANSPORT IN A SEMI-TRAILER CABIN
4. BULUT E., ALBAK E. İ., SEVİLGEN G., ÖZTÜRK F. HEAT TRANSFER RESEARCH , cilt.53, sa.4, ss.15-32, 2022. MULTI-OBJECTIVE OPTIMIZATION OF LIQUID COOLING SYSTEM FOR A TWELVE-CELL BATTERY MODULE
5. Tekin M., Ertan R., Güler Özgül H. Materials Testing-Materials And Components Technology And Application, cilt.64, sa.1, ss.116-124, 2022. Forming evolution of titanium grade2 sheets
6. Karamangil M. İ., Tekin M. CT&F - Ciencia, Tecnología & Futuro , cilt.12, sa.2, ss.31-38, 2022. Comparison of fuel consumption and recoverable energy according to NEDC and WLTP cycles of a vehicle
7. Tekin M., Karamangi M. İ. TRANSPORTATION RESEARCH RECORD, cilt.2676, sa.5, ss.388-397, 2022. Investigation of the Contribution of Deceleration Fuel Cut-off and Start/Stop Technologies to Fuel Economy by Considering New European Driving Cycle
8. Özada Ç., Ünal M., Kuzu Şahin E., Özer H., Motorcu A. R., Yazıcı M. MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES , cilt.18, sa.6, ss.1049-1077, 2022. Development and characterization of self-healing microcapsules, and optimization of production parameters for microcapsule diameter and core content
9. Özer H., Kuzu E., Özada Ç., Ünal M., Kasım H., Yazıcı M. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications , cilt.236, sa.10, ss.2002-2016, 2022. A sandwich panel that autonomously repairs sudden large holes and defects for tankers and pipelines carrying hazardous matter
10. Tokay O., Yazıcı M. Materials Today Communications, cilt.31, 2022. A review of potassium sodium niobate and bismuth sodium titanate based lead free piezoceramics
11. Kasim H., Aldeen A. N., Onat A., Sarac I., Engin B., Yazıcı M. PERIODICA POLYTECHNICA-CHEMICAL ENGINEERING, cilt.66, ss.192-204, 2022. Investigation of the Crack Propagation in the Graphene/ Synthetic Rubber Nanocomposite Materials with DIC Technique
12. Calli M., ALBAK E. İ., ÖZTÜRK F. APPLIED SCIENCES-BASEL , cilt.12, sa.10, 2022. Prediction and Optimization of the Design and Process Parameters of a Hybrid DED Product Using Artificial Intelligence
13. ALBAK E. İ. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, cilt.44, sa.5, 2022. Optimization for multi-cell thin-walled tubes under quasi-static three-point bending
14. Türker E., Bulut E., Kahraman A., Çakıcı M., Öztürk F. APPLIED SCIENCES , cilt.12, sa.24, ss.1-21, 2022. Estimation of Energy Management Strategy Using Neural-Network-Based Surrogate Model for Range Extended Vehicle
15. Kula S., Bulut E., Altay E., Sümer O., Öztürk F. CASE STUDIES IN THERMAL ENGINEERING , cilt.40, sa.December, ss.1-14, 2022. Smart cooling design using dual loop cooling to increase engine efficiency and decrease fuel emissions with artificial intelligence
16. Dortkasli K., Isik M., Demir E. Journal of Manufacturing Processes, cilt.79, ss.369-382, 2022. A thermal finite element model with efficient computation of surface heat fluxes for directed-energy deposition process and application to laser metal deposition of IN718
17. Bagherzadeh A., Koc B., Budak E., Isik M. VIRTUAL AND PHYSICAL PROTOTYPING, cilt.17, sa.3, ss.419-436, 2022. High-speed machining of additively manufactured Inconel 718 using hybrid cryogenic cooling methods
18. Demir E., Sas H. S., Isik M., Gungor E. A., Davut K. THIN-WALLED STRUCTURES, cilt.173, 2022. A numerical methodology for monitoring stress distributions and experimental proof of the concept on metal embedded thin polymer-matrix composites using X-ray Diffraction